Jewenwils HODT13D Outdoor Light Sensor Timer Instruction Manual

WARNING:

To reduce the risk of fire, electric shock, or personal injury, strictly follow these instructions:

The device must be mounted vertically with the receptacle facing downward and at least 2FT (0.6m) above ground level.
Do not connect any devices exceeding the timer's maximum ratings.
Do not immerse in water.
Children are not allowed to use the timer without supervision.
Do not disassemble or repair the product; only authorized service personnel should perform repairs.
Always unplug and store indoors when not in use.

Product Layout

The device features a main body with a control dial, a sensor, and a power indicator light, connected by a power cord. The control dial allows setting various timer functions, the sensor detects light levels, and the power indicator shows the device's operational status.

1. Timer Dial: Offers settings for 2 to 8 hours, or dusk-to-dawn operation with a daily repeat function.
2. Sensor: Activates the timer at dusk and deactivates it at dawn.
3. Power Indicator: Illuminates to show if the timer is currently on or off.

Operating Instructions

OFF: Power is OFF to attached devices.
ON: Power is ON to attached devices.
Dusk - Dawn: Power will turn on at dusk and remain on until dawn.
2 Hrs: Power will turn on at dusk and remain on for 2 hours.
4 Hrs: Power will turn on at dusk and remain on for 4 hours.
6 Hrs: Power will turn on at dusk and remain on for 6 hours.
8 Hrs: Power will turn on at dusk and remain on for 8 hours.
Cycle: Repeats every 24 hours.

Notes

The timer repeats daily after setting. In case of power failure, it will stop operating. Once power is restored, reset the desired operating mode according to the operating instructions.
Once programming activates at dusk in the 2H, 4H, 6H, or 8H Mode, the program cycle will repeat until the timer is reset. External lighting sources like headlights, porch lights, and street lamps will not interfere with the active timer program.
In Dusk-Dawn Mode, temporary light sources such as headlights, porch lights, and other external light sources will not interfere with the photocell function unless the external light source is on for more than 15 minutes. In such a case, the timer will shut off until darkness is restored.
When set to “ON”, the timer will provide continual power to attached devices until it is switched to “OFF” or any other operating mode.

Specifications

Input Voltage: 125V, 60Hz.
Max Power Rating:
- 125V, 60Hz, 1875W
- 15A Resistance
- 15A General Use
- 1000W Tungsten
- 500VA Electronic Ballast
- 120Vac, 60Hz, 8.3A Ballast
- 1/2HP
Cord: 12FT SJTW 14/3 AWG.

Safety Information

Federal Communications Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

One Year Limited Warranty

Supported by a professional R&D team and QC team, a One Year Warranty is provided for materials and workmanship from the purchase date. The warranty does not cover damage caused by personal misuse or improper installation.

Customers should attach their Order ID and Name so that the dedicated customer service team can provide assistance.

This product is cULus Listed and Made in China. Please dispose of electronic waste responsibly; do not dispose of with household waste ?️.

	Jewenwils HODT21A Outdoor Light Sensor Timer Instruction Manual Comprehensive instruction manual for the Jewenwils HODT21A Outdoor Light Sensor Timer, covering installation, operation modes (dusk-to-dawn, timed), safety warnings, specifications, FCC compliance, and warranty information.
	Jewenwils HODT31A Outdoor Light Sensor Timer Instruction Manual Comprehensive instruction manual for the Jewenwils HODT31A Outdoor Light Sensor Timer, detailing installation, operation modes (dusk-to-dawn, 2-8 hour settings), specifications, safety warnings, FCC compliance, and warranty information for optimal outdoor lighting control.
	Jewenwils HODT13E Outdoor Light Sensor Timer Instruction Manual Learn how to install and operate the Jewenwils HODT13E Outdoor Light Sensor Timer. This instruction manual covers features, operating modes (dusk-to-dawn, 2-8 hour cycles), specifications, and FCC compliance for the HODT13E model.
	Jewenwils HODT11A Outdoor Light Sensor Timer Instruction Manual The Jewenwils HODT11A Outdoor Light Sensor Timer automatically controls outdoor lighting based on ambient light levels or a set duration. This instruction manual provides detailed operating procedures, safety warnings, product specifications, and FCC compliance information for the HODT11A model.
	Jewenwils HODT12A Outdoor Light Sensing Timer Instruction Manual Instruction manual for the Jewenwils HODT12A Outdoor Light Sensing Timer, detailing installation, operation modes (dusk-to-dawn, timed), safety warnings, technical specifications, FCC compliance, and warranty information for this consumer-grade outdoor timer.
	Jewenwils HOYS22M Mechanical Yard Stake Timer Instruction Manual Learn how to install and operate the Jewenwils HOYS22M Mechanical Yard Stake Timer with this comprehensive instruction manual. Includes safety warnings, product layout, operating instructions, and specifications for this outdoor electrical timer.
	Jewenwils HODT11C Outdoor Digital Timer Instruction Manual Learn how to operate and troubleshoot the Jewenwils HODT11C Outdoor Digital Timer with this comprehensive instruction manual. Includes safety warnings, product layout, operation modes, electrical ratings, FCC compliance, and warranty information.
	Jewenwils Outdoor Mechanical Timer Box HOMT01A Instruction Manual This manual provides detailed instructions for the installation, operation, and specifications of the Jewenwils Outdoor Mechanical Timer Box, model HOMT01A. Learn how to safely install and use this timer for various electrical applications.

Jewenwils Outdoor Light Sensor Timer