Honeywell UDC3200 Universal Digital Controller

Document Number: 51-51-160-80 | Issue 16 | Page 1 of 3

Model Selection Guide

New! Easy To Use UDC3200 1/4 DIN Single Loop Controller

The UDC3200 Controller offers new powerful features while retaining the simplicity and flexibility of the industry-standard UDC3300 Controller. Many new optional features include:

  • Enhanced Display
  • Built-in infrared communications port for configuring with a Pocket PC or Laptop
  • PC Based Configuration Tools
  • Ethernet Communications
  • Two Analog Inputs
  • Accutune III, Fast/Slow, Heat/Cool
  • Thermocouple Health Monitoring

Image Description

Image of the UDC3200 Controller: A front panel view showing a digital display with indicators for PV (Process Variable), SP (Setpoint), ALM (Alarm), MAN (Manual), DI (Digital Input), OUT (Output), FC (Function Control). It also features navigation and selection buttons labeled Run, Setup, Hold, Select, Lower, Auto, and SP.

Instructions

  1. Select the desired key number. The arrow to the right marks the selection available.
  2. Make the desired selections from Tables I through VI using the column below the proper arrow.
  3. A dot ( ) denotes availability.
Key NumberIIIIIIIVVVI

KEY NUMBER - UDC3200 Single Loop Controller

DescriptionSelectionAvailabilityIf Applicable Stocking P/N
DC3200DC3201
Digital Controller for use with 90 to 250Vac Power
Digital Controller for use with 24Vac/dc Power

TABLE I - Specify Control Output and/or Alarms

DescriptionSelectionAvailabilityIf Applicable Stocking P/N
DC3200DC3201
Output #1Current Output (4 to 20ma, 0 to 20 ma)C
Electro Mechanical Relay (5 Amp Form C)E
Solid State Relay (1 Amp)A
Open Collector transistor outputT
Dual 2 Amp Relays (Both are Form A) (Heat/Cool Applications)R
Output #2 and Alarm #1 or Alarms 1 and 2No Additional Outputs or Alarms0
One Alarm Relay OnlyB
E-M Relay (5 Amp Form C) Plus Alarm 1 (5 Amp Form C Relay)E
Solid State Relay (1 Amp) Plus Alarm 1 (5 Amp Form C Relay)A
Open Collector Plus Alarm 1 (5 Amp Form C Relay)T

TABLE II - Communications and Software Selections

CategoryDescriptionSelectionAvailabilityIf Applicable Stocking P/N
DC3200DC3201
CommunicationsNone0
Auxiliary Output/Digital Inputs (1 Aux and 1 DI or 2 DI)1
RS-485 Modbus Plus Auxiliary Output/Digital Inputs2
10 Base-T Ethernet (Modbus RTU) Plus Auxiliary Output/Digital Inputs3
Software SelectionsStandard Functions, Includes Accutune0
Math OptionA
Set Point Programming (1 Program, 12 Segments)B
Set Point Programming Plus MathC
Reserved0
Infrared interfaceNo Selection0
Infrared Interface Included (Can be used with a Pocket PC)R

Document Number: 51-51-160-80 | Issue 16 | Page 2 of 3

TABLE III - Input 1 can be changed in the field using external resistors

DescriptionSelectionAvailabilityIf Applicable Stocking P/N
DC3200DC3201
Input 1TC, RTD, mV, 0-5V, 1-5V1
TC, RTD, mV, 0-5V, 1-5V, 0-20mA, 4-20mA2
TC, RTD, mV, 0-5V, 1-5V, 0-20mA, 4-20mA, 0-10V3
Input 2None00
TC, RTD, mV, 0-5V, 1-5V, 0-20mA, 4-20mA10
TC, RTD, mV, 0-5V, 1-5V, 0-20mA, 4-20mA, 0-10V20
Slidewire Input for Position Proportional (Requires 2 Relay Outputs)40a
Carbon, Oxygen or Dewpoint (Provides 2 Inputs)60b

TABLE IV - Options

CategoryDescriptionSelectionAvailabilityIf Applicable Stocking P/N
DC3200DC3201
ApprovalsCE (Standard)0
CE, UL and CSA1
TagsNone0
Stainless Steel Customer ID Tag - 3 lines w/22 characters/lineT
Future OptionsNone0
None0

TABLE V - Product Manuals

CategoryDescriptionSelectionAvailabilityIf Applicable Stocking P/N
DC3200DC3201
ManualsProduct Information on CD - All Languages0
English ManualE
French ManualF
German ManualG
Italian ManualI
Spanish ManualS
CertificateNone0
Certificate of Conformance (F3391)C

TABLE VI

DescriptionSelectionAvailabilityIf Applicable Stocking P/N
DC3200DC3201
No SelectionNone0

ORDERING INSTRUCTIONS

  1. Part numbers are provided to facilitate Distributor Stock.
  2. Orders may be placed either by model selection or by part number.
  3. Part numbers are shown within the model selection tables to assist with compatibility information.
  4. Orders placed by model selection are systematically protected against incompatibility.
  5. Compatibility assessment is the responsibility of the purchaser for orders placed by part number.
  6. Items labeled as N/A are not available via the stocking program and must be ordered by model selection.

RESTRICTIONS

Available Only WithNot Available With
TableSelectionTableSelection
IAAIR
III1

Document Number: 51-51-160-80 | Issue 16 | Page 3 of 3

Supplemental Accessories & Kits

DescriptionPart Number
Bezel Assembly and Bezel Gasket51453143-502
Display/Keyboard (with IR)51452845-501
Power/Output PWA with 2 E-M Relays (90-264 Vac Operation)51452822-502
Power/Output PWA with 2 E-M Relays (24 Vac/dc Operation)51452822-503
Optional Analog Input PWA51452825-501
Auxiliary Output/Digital Input/RS-422/485 Communications PWA51452810-501
Auxiliary Output/Digital Input/Ethernet Communications PWA51452816-501
MCU/Inputs PWA51452819-501
Electro-Mechanical Relay30755306-501
Open Collector Output PWA30756679-501
Solid State Relay30756725-501
Current Output PWA51452804-501
Dual Electromechanical Relay PWA51452807-501
Ethernet Adaptor Board Kit50009071-501
Case Assembly (including Mounting Kit with four brackets)51452759-501
Varistor (MOV) 120 Vac30732481-501
Varistor (MOV) 240 Vac30732481-502
4-20 mA Input Resistor Assembly (250 ohm)30731996-506
0-10 Volt Input Resistor Assembly (100K pair)30754465-501
Mounting Kits (12 Brackets)51452763-501
DIN Adaptor Kit30755223-003
Process Instrument Explorer Software50001619-001
Math Software Upgrade50004635-501
SPP Software Upgrade50004635-502
Panel Bracket Kit50004821-501
Product Information on CD (All Languages)51453375-501
Quick Start Manual (2 page) Standard (English)51-52-25-129
Product Manual (English)51-52-25-119
Models: UDC3200 Universal Digital Controller, UDC3200, Universal Digital Controller

PDF preview unavailable. Download the PDF instead.

DC3200 PDFium PDFium

Related Documents

Preview Honeywell UDC2500 Universal Digital Controller Model Selection Guide
Comprehensive model selection guide for the Honeywell UDC2500 Universal Digital Controller. Details features, input/output configurations, communication options, software selections, accessories, and ordering information for industrial process control applications.
Preview Honeywell UDC2500 Universal Digital Controller Model Selection Guide
Comprehensive guide for selecting the Honeywell UDC2500 Universal Digital Controller, detailing features, specifications, options, accessories, and ordering information.
Preview Honeywell UDC2500 Universal Digital Controller Quick Start Guide
A quick start guide for the Honeywell UDC2500 Universal Digital Controller, covering model number interpretation, dimensions, mounting, wiring, and configuration procedures.
Preview UDC2800 Universal Digital Controller Quick Start Guide
This guide provides a quick start for the UDC2800 Universal Digital Controller, covering setup, dimensions, mounting, wiring, configuration, and operating parameters. It includes model number interpretation and a configuration record sheet.
Preview UDC2800 Universal Digital Controller Quick Start Guide
A quick start guide for the Honeywell UDC2800 Universal Digital Controller, covering initial setup, model number interpretation, wiring, configuration procedures, setpoints, and viewing operating parameters.
Preview Honeywell UDC2500 and UDC3200 Replacement Printed Wiring Boards Instruction Sheet
Instruction sheet for replacing printed wiring boards in Honeywell UDC2500 and UDC3200 Universal Digital Controllers. Details kit contents, equipment needed, and step-by-step procedures for chassis and board removal and replacement.
Preview Honeywell Optimizer Suite: Step Up to IP Control with Unitary Controllers
Learn how Honeywell's Optimizer Suite and Unitary Controllers enable seamless IP control for building management systems, leveraging T1L technology for efficient data transfer and reduced infrastructure upgrades.
Preview Honeywell Optimizer Advanced Controller Product Datasheet
Detailed specifications, features, and ordering information for the Honeywell Optimizer Advanced Controller series, featuring Niagara Framework, IMX8 processor, BACnet compliance, and advanced cybersecurity capabilities for building automation.