Victron Energy Mobile Power System Diagram
System Components
Victron Multiplus 12/800/35
An inverter/charger unit. Specifications: 12V DC input, 800VA output, 35A charger. Connected via 25mm² cable (1-2 meters) from Lynx Distributor.
Li Time 12V 230Ah Battery
A high-capacity lithium-ion deep cycle battery. Rated at 12V and 230Ah capacity.
BOSCH S4 013 Starter Battery
A standard 12V automotive starter battery.
Victron Smart Shunt 300A
A battery monitor for real-time tracking of charge, discharge, voltage, and state of charge. Rated for 300A.
Charging & Power Management
Victron Smart Solar MPPT 75V 15A
A solar charge controller. Maximum input voltage of 75V, maximum charging current of 15A. Connected via 6mm² cable (2 meters) from Lynx Distributor.
Victron Orion TR Smart 12/12 30A
A DC-DC converter/charger. Converts 12V DC to 12V DC with a 30A output. Connected via 6mm² cable (2 meters) from Lynx Distributor.
Solar Panels
Photovoltaic panels are shown, connected to the system via SAE to MC4 adapter cables. One consumer, Ecosonique 200W, is connected via MC4.
Distribution & Protection
Victron Lynx Distributor M8
A central DC distribution hub with M8 terminals. It houses fuses for connected components: 100A for Multiplus, 40A for MPPT, 40A for Orion Ladebooster, and 40A for the 12V distributor. High-current connections use 50mm² cables (1-2 meters).
AP Kleinverteiler 4TE
A compact AC distribution panel with 4 DIN rail units (TE) for managing AC circuits.
Siemens Circuit Protection
Includes Siemens C16 30 mA and C13 30 mA circuit breakers, likely for AC circuits, providing overcurrent and residual current protection.
Fuses & Main Disconnect
System protection includes:
- 150A Mega fuse with holder near the starter battery plus.
- 40A fuse with holder near the starter battery plus.
- Trennschalter / Notaus (Disconnect switch / Emergency stop) for main system shutdown.
Input/Output & Connectivity
DEFA Steckdose
An external AC power inlet socket, commonly used for shore power connection.
SAE Aussensteckdose
An external SAE connector, used for DC power input/output.
SAE zu MC4 Kabel
Adapter cables to connect SAE connectors to standard MC4 solar connectors.
Ecosonique 200W
A 200W device identified as a consumer, connected via MC4.
Diverse 12V Verbraucher
Various 12V devices and appliances connected to the system, requiring appropriate fusing and wiring. Protected by a 12-way distributor (100A / Max 30A single).
Victron VE.Bus Smart Dongle
A communication accessory for remote monitoring and control of Victron VE.Bus products.
System Connectivity Overview
This diagram outlines a sophisticated mobile power system, integrating solar energy, battery storage, and AC power management. Solar panels are connected via SAE to MC4 cables to the Victron Smart Solar MPPT 75V 15A charge controller, which efficiently charges the Li Time 12V 230Ah battery.
The Li Time battery acts as the core DC power reservoir, linking to the Victron Lynx Distributor M8. This distributor manages power flow to major components, including the Victron Multiplus 12/800/35 inverter/charger, the Victron Orion TR Smart 12/12 30A DC-DC charger, and various 12V distribution circuits. The Multiplus converts 12V DC to 230V AC for appliances and can also charge the battery from an AC source. The Orion TR Smart 12/12 30A enables charging from an auxiliary 12V source, such as the BOSCH S4 013 starter battery, or vice-versa.
The Victron Smart Shunt 300A is installed to monitor the battery bank's performance, providing real-time data on charge, discharge, voltage, and state of charge. The system incorporates a DEFA Steckdose for external AC shore power input, typically connecting to the Multiplus or the AP Kleinverteiler 4TE, which handles AC circuit distribution.
Safety and protection are ensured through multiple fuses: a 150A Mega fuse and a 40A fuse are located near the starter battery plus. The Lynx Distributor itself contains 100A and 40A fuses for its respective loads. A main disconnect switch (Trennschalter / Notaus) is present for emergency system shutdown.
Key wiring specifications are detailed: 50mm² cables (1-2 meters) are used for high-current battery connections to the Lynx Distributor, and 25mm² cables (1-2 meters) connect the Lynx Distributor to the Multiplus. Other connections utilize cables such as 6mm² (2 meters, max 15A or 18A) and 10mm² (2 meters, max 18A; 5 meters, max 18A).
The Ecosonique 200W device is identified as a 12V consumer connected via MC4. A 12-way distributor (100A / Max 30A single) is used for various other 12V consumers, each requiring appropriate fusing and wiring.
The Victron VE.Bus Smart Dongle facilitates wireless communication for remote monitoring and control of the Victron system components. The diagram also indicates grounding connections to the vehicle chassis, labeled "Carrosserie".
