DeLonghi NSL 590D X 90cm 5 Burner Slimline Gas Cooktop
Overview
The DeLonghi NSL 590D X is a 90cm, 5-burner slimline gas cooktop designed for modern kitchens. It offers a blend of functionality, durability, and aesthetic appeal, suitable for both LPG and Natural Gas with an included conversion kit.
Key Features
- 5 Burner Gas Cooktop
- 4.2 kW Dual Burner with independent knob control
- Instant automatic ignition
- Simmer control for low heat cooking
- Heavy-Duty cast iron trivets
- Flame Failure safety cut-off on all burners
- Recessed base to catch spills
- Stainless steel slimline design
- Suitable for LPG or Nat Gas (conversion kit included)
Detailed Feature Descriptions
Cast Iron Trivets
Cast iron pan supports provide stability for pots and pans. They are easy to clean and long-lasting, providing a professional look for years to come.
Instant Ignition
With just the push of the knob, an electronic device causes a continuous series of sparks to quickly and easily ignite the selected burner.
Dual Burner
Independent burner operation allows you to use the burners either separately or together for greater control and cooking flexibility.
Technical Specifications
| Specification | Details |
|---|---|
| Product Dimensions (H x W x D) | 49 mm x 900 mm x 510 mm |
| Front Left Auxiliary Burner – LPG / Nat Gas | 4.20 / 4.20 MJ/h |
| Rear Left Semi-Rapid Burner - LPG / Nat Gas | 6.2 / 6.5 MJ/h |
| Rear Right Semi-Rapid Burner – LPG / Nat Gas | 6.2 / 6.5 MJ/h |
| Front Right Rapid Burner – LPG / Nat gas | 10.78 / 11.75 MJ/h |
| Centre Left Dual Burner – LPG / Nat Gas (outer) | 11.40 / 13.80 MJ/h |
| Centre Left Dual Burner – LPG/Nat Gas (inner) | 2.10 / 2.40 MJ/h |
| Total Gas Consumption – LPG | 38.78 MJ/h |
| Total Gas Consumption – Natural | 42.75 MJ/h |
| Warranty | 2 years |
Dimensions and Installation Diagram Descriptions
The following describes the diagrams provided for installation and dimensions:
Overall Appliance and Cut-out Dimensions
A diagram illustrates the cooktop's physical dimensions and the required cut-out for installation. Key measurements are:
- Appliance Width (A): 900 mm
- Appliance Depth (B): 510 mm
- Appliance Height (H, from table): 49 mm
- Cut-out Width (D): 840 mm
- Cut-out Depth (C): 49 mm (*)
- Front Edge to Cut-out (E): 480 mm
Note: (*) indicates approximate cut-out depth.
Installation Clearances Diagram
A diagram shows the cooktop installed within cabinetry, detailing necessary clearances:
- Cooktop Installed Height: 650 mm from floor
- Minimum Cabinet Depth: 500 mm
- Minimum Vertical Clearance Above: 450 mm
- Minimum Front Clearance (F): 60 mm (**)
- Minimum Side Clearance (G): 200 mm (***)
Note: (**) and (***) indicate minimum required clearances.
