NSL 460 X
60cm 4 Burner Life Slimline Gas Cooktop
Key Features
- 4 burner gas cooktop
- Instant Automatic Ignition
- Simmer Control for low heat cooking
- Heavy-Duty cast iron trivets
- Flame Failure safety cut-off on all burners
- Recessed base to catch spills
- Stainless steel slimline design
- Suitable for LPG or Nat Gas (Conversion kit included)
Feature Highlights
Cast Iron Trivets
Cast iron pan supports provide stability for pots and pans. They are easy to clean and long lasting, providing a professional look for years to come.
Instant Ignition
With just the push of the knob, an electronic device causes a continuous series of sparks to quickly and easily ignite the selected burner.
Sleek Slim Line Design
A low-profile cooktop designed to integrate into any workbench.
Technical Specifications
Description | Unit | LPG / Nat Gas |
---|---|---|
Product Dimensions (H x W x D) | mm | 49 x 600 x 510 |
Front Right Auxiliary Burner | MJ/h | 4.20 / 4.20 |
Rear Left Semi-Rapid Burner | MJ/h | 6.2 / 6.5 |
Rear Right Semi-Rapid Burner | MJ/h | 6.2 / 6.5 |
Front Left Double Ring Compact | MJ/h | 9.60 / 10.70 |
Total Gas Consumption | MJ/h | 26.20 (LPG) / 27.90 (Natural) |
Warranty | 2 years |
Dimensional Information
The following diagrams provide key dimensions for installation and product integration.
Overall Dimensions and Cut-out Requirements
A diagram illustrates the cooktop's overall dimensions and cut-out requirements. Key dimensions are labeled A through G and detailed in the table below:
Description | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | F (minimum mm) | G (minimum mm) |
---|---|---|---|---|---|---|---|
Model NSL 460 X | 600 | 510 | 49 (*) | 560 | 480 | 60 (**) | 200 (***) |
(*) C dimension refers to the cut-out depth. (**) F dimension is the minimum clearance required at the front. (***) G dimension is the minimum clearance required at the back.
Installation Clearance Diagram
A diagram shows the cooktop installed within a kitchen cabinet. It indicates recommended clearances: 650 mm above the cooktop and 450 mm below the cooktop. The cabinet opening width is shown as 500 mm.
The product dimensions and specifications on this page apply to the specific model at the time of issue. Dimensions & specifications may change at any time.