NSL 590D NCM 90cm 5 Burner Life Gas On Glass Cooktop
Key Features
- 3.8 kW Double ring burner
- Instant automatic ignition
- Simmer control for low heat cooking
- Heavy-Duty cast iron trivets
- Flame Failure safety cut-off on all burners
- Thermal shock resistant ceramic glass
- Contemporary black glass finish
- Suitable for LPG or Nat Gas (Conversion kit included)
Cast Iron Trivets: Cast iron pan supports provide stability for pots and pans. They are easy to clean and long lasting.
Double Ring Burner: A powerful double ring burner provides heat from two fire crowns for even heat distribution, making it perfect for wok cooking.
Instant Ignition: With just the push of the knob, an electronic device causes a continuous series of sparks to quickly and easily ignite the selected burner.
Precision Control: Go from simmering to fast boil, by using 9 levels of flame control. Accurate selection of the right flame for each recipe.
Contemporary frameless black glass design: A low-profile cooktop designed to integrate into any workbench.
Technical Specifications
| Specification | Unit | Value |
|---|---|---|
| Product Dimensions (H x W x D) | mm | 54 x 900 x 510 |
| Front Left Auxiliary Burner – LPG / Nat Gas | MJ/h | 4.20 / 4.20 |
| Rear Left Semi-Rapid Burner - LPG / Nat Gas | MJ/h | 6.2 / 6.6 |
| Rear Right Semi-Rapid Burner – LPG / Nat Gas | MJ/h | 6.2 / 6.6 |
| Front Right Rapid Burner – LPG / Nat gas | MJ/h | 10.78 / 11.75 |
| Centre Left Double Ring – LPG / Nat Gas | MJ/h | 14.10 / 13.70 |
| Total Gas Consumption – LPG | MJ/h | 41.48 |
| Total Gas Consumption – Natural | MJ/h | 42.85 |
| Warranty | 2 years |
Dimensions and Installation
The following dimensions are provided for installation planning. Please note that diagrams are a guide only, and final fitting should be made with the actual product.
Overall Dimensions and Cutout Specifications:
The cooktop has the following measurements:
- A (Width): 900 mm
- B (Depth): 510 mm
- C (Cutout Depth): 54 mm (*)
- D (Cutout Width): 840 mm
- E (Cutout Front to Back): 480 mm
- F (Minimum Front Clearance): 60 mm (**)
- G (Minimum Back Clearance): 200 mm (***)
Installation Clearances:
When installed, the cooktop requires specific clearances:
- The cutout for the cooktop is 840 mm wide and 480 mm deep.
- The cooktop is installed with 450 mm of height above the countertop and 650 mm below.
- A clearance of 500 mm is indicated from the front edge of the countertop, and a clearance G (minimum 200 mm) is shown from the back edge.
The product dimensions and specifications on this page apply to the specific model at the time of issue. Dimensions & specifications may change at any time.
