Introduction
The Climax Mobile Lite R35-C is a sophisticated, new-generation GPS locator designed in a convenient wristwatch form factor. It offers advanced features including GPS positioning, Wi-Fi positioning, GeoFencing, and mobile network connectivity, ensuring users are protected wherever they go. A key feature is its built-in fall sensor, which automatically triggers an alarm call when a fall is detected.
The Mobile Lite unit is capable of providing voice prompts to enhance user awareness and can report events via Speech, SMS, and IP (Mobile Network) protocols, facilitating direct communication with monitoring centers.
What's in the Box
Your Mobile Lite package includes the following essential items:
- Mobile Lite R35-C
- CT-35-C charging cradle
- Lanyard
- Wristband
- Power Cable
- 5V 1A Adapter
- Programming Cable (Optional)
System Overview
Identifying the Parts
The Mobile Lite R35-C features several key components:
- Microphone: For audio input.
- Green LED: Indicates normal operation (1 flash every 5 seconds) and charging status.
- Red LED: Signals low battery (1 flash every 3 seconds) or when the unit is in GSM power-off mode.
- Amber LED: Indicates cellular network faults or local updates (1 flash every 3 seconds).
- Active Button: Used for various functions including triggering emergency alarms, answering calls, and terminating calls.
- Speaker: For audio output.
- Charging Contacts: For connecting to the charging cradle.
- Type C Jack: For the programming cable.
Power Supply
The Mobile Lite R35-C is powered by a rechargeable battery with a typical charging time of 4 hours. It is recommended to fully charge the device before its first use. The device provides low battery notifications and will automatically conserve power by disabling GPS/Wi-Fi positioning and the GSM module when the battery level is critically low.
Getting Started – Setting up Mobile Lite
Mobile Lite Lanyard and Attachment
The Mobile Lite R35-C can be worn as a wristwatch or as a necklace. Both the lanyard and wristband feature a quick-release mechanism for easy assembly and disassembly.
Mobile Lite Wristband and Attachment
The wristband can be attached to the Mobile Lite R35-C using the provided spring bars. Follow the step-by-step instructions for secure attachment.
Charging Mobile Lite
To charge the Mobile Lite R35-C, place it into the CT-35-C Cradle, ensuring the charging contacts align. Connect the Type-C end of the power cable to the cradle and the USB end to a 5V/1A adapter plugged into a power socket.
Hardware Installation (For PC Programming)
For PC programming, a special Programming Cable is required to connect the Mobile Lite R35-C to a computer via the CT-35-C cradle. Ensure you use the correct programming cable and not the power cable for computer connections. If a programming cable is not provided, please contact your supplier.
VCP Drivers - FTDI
