Climax Wired BUS Security System

A complete wired security system offered by Climax.

The Climax wired BUS security system is a comprehensive wired product line that provides reliable protection suitable for a broad range of commercial applications, offering an alternative to Climax's wireless security solutions. The newly introduced VST-897-BUS is a hardwired PIR motion sensor camera featuring IR Anti-masking and capable of sending captured images to the Hybrid Panel upon movement detection. In addition, the VST-892EX-BUS is suitable for outdoor applications. Climax also launches the TSP-1-BUS, a hardwired touchscreen keypad that provides access to arm/disarm/home-arm the system, offering intuitive operation of the security system. Other products from the wired BUS security system include keypads, tag readers, motion sensor cameras, motion detectors, sirens, bell boxes, door/window contacts, smoke detectors expansion modules, and more. Through a BUS connection, the wired BUS devices allow the connection of multiple devices simultaneously for enhanced flexibility and redundancy.

Wired BUS System Topology

Control Panel

Hybrid Security Alarm System

Hybrid Panel

Hybrid Security Alarm System Features:

• A wired and wireless IP-based smart home security gateway with LTE capability
• 80 zones per areas, 8 areas, 640 zones in total
• 16 on-board wired zones available
• SF1 technology enables HD image transfer via RF and visual alarm verification within 4 secs
• Number of BUS connected devices: 128
• Smart Automation that incorporates ZigBee/Z-Wave devices
• World-leading 2-Km RF Range that delivers RF communication range of 2km.
• 24-Hour Emergency Monitoring by incorporating emergency security devices
• Scalable System that integrates wired zone expansion modules and devices
• Visual Verification and Real-time Visual Monitoring by incorporating cameras
• Remote and Mobile Control via Vesta Home 5 web portal/App
• Power: 100-240VA, 50/60 Hz
• Backup Battery: 12V/7Ah & 12V/4Ah sealed lead-acid batteries
• 7.2V 4500mAh & 2300mAh Ni-MH rechargeable battery packs
• Total power output for wired zones, keypad and auxiliary output: 13.5V (Typical)
• EN50131 Grade 2 (wireless), Grade 3 (wired), Class II certified, INCERT certified

Hybrid Panel Lite

Hybrid Security Alarm System Features:

• Wired and wireless smart home security gateway
• 80 zones per areas, 8 areas, 640 zones in total
• 8 on-board wired zones available
• SF1 technology supports:
• Transfer of HD images by RF network
• Visual alarm verification in just 4 seconds for QGVA images
• Encryption for data transfer's security
• External SMA input for Antenna
• Visual Verification and Real-time Visual Monitoring by incorporating cameras
• 24-Hour Emergency Monitoring by incorporating emergency security devices
• Remote and Mobile Control via Vesta Home 5 Web Portal/App
• Power: 100-240VA, 50/60 Hz
• Backup Battery: 12V/7Ah & 12V/4Ah sealed lead-acid batteries
• Total power output for wired zones, keypad and auxiliary output: 13.5V (Typical)

Security Sensors

Keypad & Tag Reader

KP(T)-35-COMBO Series

Wired and Wireless Combo Keypad

• Wired and Wireless Keypad with built-in RF module
• Installer and user menus for configuration
• 32-character LCD display Alarm memory, event logs, fault reports or system status
• Built-in siren to emit alarm sound
• Dual key function to trigger panic, fire or medical alarms
• Audible beeps to indicate entry/exit delays and other system status
• Wall mount tamper
• EN50131 Grade 2 (wireless) or Grade 3 (wired), Class II certified
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 11.3 mA (standby); 43.6 mA (maximal) (KP-35-Combo)
• Current Consumption: 12.3 mA (standby); 57.6 mA (maximal) (KPT-35-Combo)
• Backup Battery: L91 AA Lithium 1.5V x 2

KPT-35(N)-BUS Series

Wired Keypad

• Installer and user menus for configuration
• Built-in siren to emit alarm sound
• Dual key function to trigger panic, fire or medical alarms
• Audible beeps to indicate entry/exit delays and other system status
• Wall mount tamper
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 24.4 mA (standby); 77.6 mA (maximal)

TSP-1-BUS

Touchscreen Keypad

• 7" high resolution color graphic touchscreen
• Panel status and event revision
• Automation control
• Video Verification of IP cameras and video phones
• Built-in microphone and speaker
• OTA firmware update capability
• BUS 13.5V input from Hybrid Panel or DC 12V input via power terminal
• Current Consumption: 10 mA (standby); 411 mA (maximal)

TG-15N-BUS

BUS Tag Reader

• Arms / Disarms security system via NFC tags
• Remote management of learning or removing tag
• IPX5 waterproof housing
• Tamper protection for unauthorized removal or sabotage
• NFC Protocol: ISO 14443 A/B
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 4 mA (standby); 23 mA (maximal)

Motion Detector & Glass Break Detector

IR-35-BUS

PIR Motion Detector

• Lens support range of 12 meters and angle up to 90°
• Mounting height: 2.3-2.5 m
• Pet immunity enabled / disabled and sensitivity level adjustment by remote control setting
• Pet immunity up to 25 kilos
• Tamper protection against sabotage
• Temperature compensated sensitivity control
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 2.37 mA (standby); 14.4 mA (maximal)
• EN 50131 Grade 2, Class II certified
• INCERT-certified

IRAGS-35-BUS

Dual-tech PIR and glass-break detector

• Special lens crafted with advanced technology to reduce blind spot
• Alerts owners when a glass window or door is being smashed or broken
• Remote control of sensitivity levels and pet immunity
• Monitors the state of glass at up to 8 meters
• Flexible installation height of 2.3 to 2.5 meters
• Four selectable acoustic sensitivity distance settings (8m, 5m, 3m and 1.5m)
• Temperature compensated sensitivity control
• Microphone technology to recognize acoustic patterns of glass break detection
• EN 50131 Grade 2, Class II certified
• INCERT-certified
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 1 mA (standby); 5 mA (maximal)

Motion Sensor Camera

VST-892-BUS / VST-892HD-BUS

PIR Motion Sensor Camera

• Alarm image quality options: 1280x720 pixels (for HD model only), 640x480 pixels and 320x240 pixels
• Detection Range: 12 meters
• Horizontal Angle: 90°
• Installation height: 2.3-2.5m
• Pet immunity enabled / disabled and sensitivity level adjustment by remote control setting
• Anti-masking feature
• Night illumination capability (Warm white up to 5m; Infrared (IR) up to 7 m) (VST-892-BUS)
• Night illumination capability (Warm white up to 10m; Infrared (IR) up to 10 m) (VST-892HD-BUS)
• Tamper protection to prevent unauthorized sabotage
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 0.87 mA (standby); 89.7 mA (maximal)
• EN 50131 Grade 2, Class II certified
• INCERT-certified

VST-892EX-BUS / VST-892EX-HD-BUS

Outdoor PIR Motion Sensor Camera

• Alarm image quality options of 1280x720 pixels (for HD models only), 640x480 pixels and 320x240 pixels
• Detection Range: 10 meters
• Horizontal Angle: 90°
• Installation height: 2.3-2.5m
• Pet immunity enabled / disabled and sensitivity level adjustment by remote control setting
• Anti-masking feature
• Night illumination capability (Warm white up to 5m; Infrared (IR) up to 7 m) (VST-892EX-BUS)
• Night illumination capability (Warm white up to 10m; Infrared (IR) up to 10 m) (VST-892EX-HD-BUS)
• IPX5 for outdoor usage
• Tamper protection to prevent unauthorized sabotage
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 0.83 mA (standby); 141.5 mA (maximal)

VST-897-BUS

BUS PIR Motion Sensor Camera

• Infrared Over-the-Lens Anti-Masking allows detects attempts to blind detector
• Comprehensive detection range for extensive coverage
• High responsiveness and advanced processing enable instant motion detection
• Alarm image quality options of 1280x720 pixels, 640x480 pixels and 320x240 pixels
• Detection Range: 9~12 meters
• Horizontal Angle: 90°
• Installation height: 2.3-2.5m
• Night illumination capability (Warm white up to 10m; Infrared (IR) up to 10 m)
• Tamper protection to prevent unauthorized sabotage
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 0.83 mA (standby); 141.5 mA (maximal)
• EN 50131 Grade 3, Class II certified

Smoke Detector

SD-32-BUS

Hardwired Smoke Detector

• Dual-LED optical sensor able to prevent false alarms caused by cooking nuisance
• Polyurethane foam detection in fast moving fire and slow smoldering burn
• High tolerance against dust accumulation to prevent false alarms
• High-voltage current surges Immunity
• Audible Output at 85dBA at 3m
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 1.8 mA (standby); 100 mA (maximal)
• Rechargeable Battery: 3.6V 200mAh AAA NI-MH battery pack

Siren

SR-35-BUS

Indoor Siren

• Siren output level is 95dB at 1 meter
• Capable of remote programming of siren volume
• Cover tamper protection prevents unauthorized removal and sabotage
• Regular supervision signals to check system integrity
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 0.84 mA (standby); 39.3 mA (maximal)
• EN50131 Grade 2, Class II certified
• INCERT-certified

Bell Box

BX-32-BUS

Outdoor Bell Box

• Siren output level is 104dB at 1 meter
• Capable of remote programming of siren volume
• Cover tamper protection prevents unauthorized removal and sabotage
• IPX5 waterproof and UV resistant housing
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 0.88 mA (standby); 54.8 mA (maximal)
• INCERT-certified

Door / Window Contact

DC-23-BUS

Door / Window Contact

• Extension terminals for connection to wired devices
• Powerful magnet allows for an overall side-to-side gap distance of 15 mm
• Enables home automation to turn on/off appliances
• Doubles as an universal transmitter
• Tamper protection to prevent unauthorized removal
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 0.64 mA (standby); 11.2 mA (maximal)
• EN50131 Grade 2, Class II certified
• INCERT-certified

DCSV-29-BUS

Door Contact / Shock Sensor

• Door/window opening or window glass break and shock detection
• Three adjustable sensitivity threshold levels (high, medium and low)
• Tamper switches for sabotage detection
• Remote settings of material and sensitivity
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 0.79 mA (standby); 8 mA (maximal)

Expansion Modules

Expansion Module

WEZC-8 / WEZC-8B

8 wired zone expansion module

• Expansion of additional wired zones of 8
• Dual wall-mount & front cover tamper protection Plastic housing
• Rechargeable backup battery 2300 mAh Ni-Mh battery pack (for WEZC-8B only)
• Power Source: 1600 mAh Ni-MH battery pack; Battery Life: 31 hours* (WEZC-8B model only)
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption for WEZC-8: 9 mA (standby); 95mA (maximal)
• Current Consumption for WEZC-8B: 9 mA (standby); 85mA (maximal)
• EN50131 Grade 3, Class II certified

WEZ-12/24/36/48-BUS

Wired zone expansion module

• Expansion of additional wired zones of 12, 24, 36, 48
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 6 mA (standby); 31mA (maximal)

WEPC-1 / WEPC-1B

Programmable Output Expansion Module

• Expansion of additional 4 programmable outputs
• Wall-mount & front cover tamper protection
• Plastic housing
• Rechargeable backup battery 2300 mAh Ni-Mh battery pack (for WEPC-1B only)
• Power Source: 2300 mAh Ni-MH battery pack; Battery Life: 6 ~ 27 hours* (WEPC-1B only)
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 9 mA (standby); 240 mA (maximal)
• EN50131 Grade 2, Class II certified

Power Supply, Interface Module and Repeater

Auxiliary Power Supply Module

PWB-1-BUS

Auxiliary Power Supply Module

• Provides integrated power supply solution for wired system
• Equipped with 3 sets of 4-pin BUS terminals
• Designed to be installed inside AWO300 casing
• Capable of charging 12V 7Ah or 17.2Ah Lead-acid battery
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 40 mA (standby); 3 A (maximal)
• EN50131 Grade 3, Class II certified
• INCERT certified

Transmitter

Signal Transmitter

OPT-BXS-BUS

• Can be installed in 4 outdoor motion detector models (QXI-RDT-X5, BXS-RAM, VXS-RAM, and WXI-RAM) to wireless technology
• Capability to configure remote control settings
• Enhanced flexibility of device's usage
• Regular supervision signals to check system integrity
• Compact and lightweight for easy installation
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 0.8 mA (standby); 10 mA (maximal)

Universal Interface Module

UIM-1-BUS

• A universal interface module designed for the connection of wired devices to the Climax's Hybrid Panel via RS-485 BUS terminals
• Equipped with a set of 4-pin BUS terminals
• Allows for ground wiring and DC power supply connection
• Increases flexibility for wired security system
• Allows connected device to send alarm, tamper and anti-masking signals
• Inputs (Dry Contacts): GND, VCC, Input 1 (Alarm), Input 2 (Tamper), Input 3 (Anti-masking)
• Input Voltage from Hybrid Panel: 13.5V
• Current Consumption: 8 mA (Standby); 12 mA (Maximal)

BUS Repeater

Isolated Range Extender

ISL-1-BUS

• Protects the connected devices against short circuit downstreams
• Provides communication range extension of BUS system
• Amplifies and filters signal for connected BUS devices
• Boosts current for connected BUS devices
• Designed to be employed with Hybrid Panel and PWB-1-BUS
• Input Voltage: 8~14V (1 terminal)
• Output Current 0.5A (for each of 2 terminals)
• Extension Length: 4000 ft
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 110 mA (standby); 130 mA (maximal)

BUS Repeater

AMP-1-BUS

• Provides communication range extension of BUS system
• Amplifies and filters signal for connected BUS devices
• Equipped with 3 sets of 4-pin BUS terminals
• Designed to be employed with Hybrid Panel and PWB-1-BUS
• Input Voltage: 8~14V (1 terminal)
• Output Current: 1A (for each of 2 terminals)
• Extension Length: 4000 ft
• Input Voltage from Hybrid Panel: 13.5V DC
• Current Consumption: 5 mA (standby); 45 mA (maximal)