Climax Technology specializes in wireless security systems, home automation sensors, and telecare solutions for residential and commercial safety.
Climax Technology Co., Ltd. is a global provider of security, telecare, and home automation solutions. Founded in Taiwan, the company designs and manufactures a wide array of wireless sensors, control panels, and monitoring devices that integrate seamless connectivity with robust safety features. Their product line includes advanced motion detectors, door/window contacts, environmental sensors (such as carbon monoxide and smoke detectors), and personal emergency response systems (PERS).
Climax focuses on innovation in wireless communication protocols, including ZigBee, Z-Wave, and DECT ULE, ensuring their devices are compatible with modern smart home ecosystems. Whether for intruder detection, elderly care monitoring, or energy management, Climax products are engineered to deliver reliability and peace of mind.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
To change the battery, remove the top retaining screw and slide the cover to the left. Remove the old battery and press the Learn/Test button several times to drain residual power. Insert a new 3V CR2450 Lithium battery with the positive (+) side facing up, then replace the cover and screw.
The Green LED flashes every 45 seconds to indicate power is ON. The Red LED flashes rapidly during an alarm or signal transmission. The Yellow LED indicates low battery, faults, or end-of-life warnings.
In Normal Operation Mode, the Door Contact transmits supervisory signals to the Control Panel periodically at random intervals of 15 to 18 minutes to ensure system integrity.
If the battery is low, the LED will light up for 2 seconds upon activation (when the device is opened/closed). If the LED flashes every 4 seconds, the battery is completely exhausted and functions will stop.