Artemide Tolomeo Suspension Diffusore

Design: Michele De Lucchi - Giancarlo Fassina

General Warnings

Avvertenze/Avis/Note/Vorsicht/Advertencia: Before performing any operation on the fixture, disconnect the mains power supply. Use only bulbs of the type and wattage indicated on the rating plate.

Assembly Instructions

Istruzioni di montaggio/Instructions de montage/Assembly instructions/Aufbaueinleitung/Instrucciones para el montaje:

Completely unscrew the locking ring A.
Keeping the rod B steady with one hand, screw the extension C onto the joint D.
Screw the locking ring P.
Couple the steel cables O to the joint D. To facilitate this operation, it is advisable to bring the two arms closer to rod B as shown in the figure.
Separate the bottom plate cover E from the bottom plate F using a screwdriver.
Pass the cables from the ceiling through hole G and fix the bottom plate F using the loops H.
Unscrew the screw Q to separate the bracket R from the bottom plate F.
Make the electrical connections to the terminal strip, connecting the earth cable to screw L marked with the ★ symbol.
Reassemble the bracket R and tighten the screw Q.
Adjust the height and direction of the lamp by unscrewing the locking ring A.
If necessary, loosen the cable clamp M and shorten the power cables N. Attention: ensure sufficient cable length to allow the lamp to be moved in all its positions (the zones indicated by Z should have some slack in the cable).
Reposition the bottom plate cover E.
Adjust the locking rings S to increase or decrease the stiffness of the fixture's movements.

Diffuser Installation

Per il montaggio del diffusore T/Pour le montage du diffuseur T/To install the diffuser T/Für die Montage des Diffusors T/Para montar el difusor T: Loosen the lock ring V, position the diffuser T, and retighten the lock ring V. Tighten the bulb. Note: For cleaning this diffuser, use only a brush. Do not use water or detergents.

Bulb Specifications

Lampadine (IT)	Ampoules (FR)	Bulbs (EN)	Glühlampen (DE)	Bombillas (ES)
2x150W IAA E27	2x150W IAA E27	2x150W IAA E27	2x150W IAA E27	2x150W IAA E27
2x150W IAG E27	2x150W IAG E27	2x150W IAG E27	2x150W IAG E27	2x150W IAG E27
2x150W HSG E27	2x150W HSG E27	2x150W HSG E27	2x150W HSG E27	2x150W HSG E27
For USA and Canada only: 2x150W type A-G-T10 E26

Safety and Compliance

The ★ symbol indicates the suitability of fixtures for mounting directly on normally flammable surfaces. Fixtures without this symbol are suitable for installation only on non-flammable surfaces.

All ARTEMIDE products falling within the scope of the European low voltage directive B.T. 73/23 and subsequent amendment 93/68 meet the required specifications and bear the "CE" marking.

ARTEMIDE s.p.a. assumes no responsibility for products modified without prior authorization. Electrical safety is guaranteed only when used as indicated in these instructions. Therefore, they should be kept for future reference.

Product Information

cod. Y503001050

Artemide

via Bergamo, 18--20010 Pregnana Milanese (Milano)--ITALIA

tel: 93.51.81

telefax: 02/93.59.02.54--93.59.04.96

internet: http://www.ARTEMIDE.COM

VAT number: 00846890150

	Tolomeo Floor Mega Alluminium OnOff Body Lamp by Artemide - Design by De Lucchi & Fassina Discover the iconic Tolomeo Floor Mega Alluminium OnOff Body Lamp by Artemide, designed by Michele De Lucchi and Giancarlo Fassina. Featuring a minimalist aluminum structure, articulated arm system, and versatile diffuser options.
	Artemide Tolomeo Micro LED Lamp - Installation and Operation Guide Comprehensive guide for the Artemide Tolomeo Micro LED lamp, covering assembly for table, wall, clamp, and floor mounting, operation, dimming, LED replacement, and safety compliance.
	Artemide Tolomeo Midi LED: Installation and Operation Guide Comprehensive guide for the Artemide Tolomeo Midi LED lamp, covering installation for various mounting types (table, wall, clamp, floor), operation, dimming, and LED replacement. Includes safety warnings and technical specifications.
	Artemide Nesso Lamp: Guida all'installazione e all'uso Guida completa per la lampada Artemide Nesso, un classico del design italiano. Include istruzioni di montaggio, avvertenze di sicurezza, specifiche tecniche e informazioni sulla conformità.
	Artemide Algoritmo Controlled Prismoptic Emission System - 1184mm Gloss Anodized Detailed information on the Artemide Algoritmo Controlled Prismoptic Emission system, a modular lighting solution for suspension, ceiling, and wall mounting. Features include structural aluminum modules, pre-wired gear plates, and quick-connection optics for various lighting effects. Includes product specifications, dimensions, and available accessories.
	Artemide Tolomeo Decentrata Lamp Bending Angles and Adjustments Detailed guide illustrating the bending angles and rotational adjustments for the Artemide Tolomeo Decentrata lamp, showcasing its flexibility and range of motion.
	Artemide Chilone Floor and Wall Light Assembly Instructions Comprehensive assembly guide for the Artemide Chilone floor and wall-mounted lighting fixtures, designed by E. Gismondi. Includes step-by-step instructions for installation, wiring, and mounting for both floor and wall applications.
	Artemide Nur Suspension Light Installation Guide Comprehensive installation guide for the Artemide Nur suspension light, designed by Ernesto Gismondi. Includes step-by-step instructions and safety information.