BAGGEBO Bookcase Assembly Instructions

Important Safety Information

⚠️ WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.

Screws and plugs for the wall are not included. Use screws and plugs suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.

Parts Included

• 10x Screw (Part #100229)
• 12x Dowel (Part #101345)
• 1x Screw (Part #109041)
• 2x Washer (Part #100823)
• 1x Allen Key (Part #100006)
• 1x Wall Mounting Bracket (Part #106989)
• 14x Screw (Part #101221)
• 1x Plastic Clip (Part #105494)
• 4x Plastic Cap/Cover (Part #122628)

Assembly Steps

1. Step 1: Attach the wall mounting bracket (106989) to one of the side panels using one screw (109041) and one washer (100823). Ensure the bracket is oriented correctly.
2. Step 2: Insert 12 dowels (101345) into the pre-drilled holes on the side panels.
3. Step 3: Connect the side panels to the bottom panel. Use dowels and secure with 4 screws (109041).
4. Step 4: Insert dowels (101345) into the shelves. Connect the shelves to the side panels using the inserted dowels. (Two dowels shown per shelf connection).
5. Step 5: Attach the top panel to the assembled structure. Use the Allen key (100006) to fasten with 5 screws (100229).
6. Step 6: Slide the middle shelf into its designated position.
7. Step 7: Secure the middle shelf by fastening with 5 screws (100229).
8. Step 8: Attach the plastic clips (105494) to the underside of the top panel and the top of the bottom panel. Secure them using 14 screws (101221).
9. Step 9: Cover exposed screw heads or fasteners by gently hammering in 4 plastic caps (122628).
10. Step 10: Secure the furniture to the wall using the wall mounting bracket (106989). Ensure you use screws and wall plugs appropriate for your wall type (not included).