Outdoor Night Vision Camera ADC-V720
Data Sheet
Introduction
The ADC-V720, an Alarm.com's new outdoor IP night vision camera, is designed specifically to work with the Alarm.com hosted video service, providing a professional surveillance solution. HD 720P live and recorded video are available to customers through web-enabled computers, cell phone web browsers, and via free downloadable apps compatible with all Alarm.com enabled mobile devices. This camera is designed to see at a distance of over 39 feet in the dark while still delivering true daytime colors thanks to the mechanical IR cut filter. The camera is easy to set up and supports the Power over Ethernet feature.
Features
| Live resolution options | 1280x800, 640x400, 320x200, 176x144 |
| Recording resolution options | 1280x800, 640x400, 320x200 |
| Live quality | High, medium and low compression options |
| Recording quality | High and medium compression options |
| Recording compression | H.264, MPEG-4 |
| Image sensor | 1/4" CMOS, 1280x800 |
| Iris | Fixed Iris, F1.8 |
| Field of view | 77° (horizontal), 54° (vertical) |
| Low-light sensitivity | 0 lux with IR on |
| IR LED illumination | 12 meters |
| Image adjustments | Brightness, Contrast, Saturation, Sharpness, Exposure |
| Video motion detection | 3 windows, adjustable sensitivity and threshold |
| Digital input trigger | Yes |
| Ethernet connection | 10/100 Mbps RJ-45 |
| Password authentication | "Digest" authentication |
| Simultaneous viewers | 10 |
| Privacy Button | No |
| Operation temperature | Approximately 4° to 122°F (approximately -20°C to +50°C) |
| Operating humidity | 0% to 90% RH |
| Weather proofing rating | Ingress protection IP66 |
| Max power consumption | 12V DC, 5.8W |
| Dimensions (LxD) | Length: 155mm, Diameter: 60mm |
| Weight | 28.6 Oz |
Included Accessories
- Heavy duty camera stand
- Wall Screws
- Silica gel packet
- Power Adapter
LED Guide
| LED Status | Description |
|---|---|
| All off | Power off |
| Solid Red | Power on, system booting |
| Green blink every second | Local network connection with local IP address |
| Solid Green | Full internet connection with Alarm.com IP |
| Solid Red | No local or Internet connection |
| Red blink every 0.15 second | Upgrading firmware |
| Red blink every 0.15 second + Green blink every 0.15 second | Restoring factory default settings |
Diagram Description
The diagram illustrates the network setup for the camera. The ADC-V720 camera connects via an Ethernet cable to a Network Router. The Network Router is connected to a Modem, which in turn connects to the Internet. The camera also features an I/O Terminal Block, indicated for connecting sensors or other hardwired input devices. This block includes connections for Digital Input (labeled DI, shown in red) and Ground (labeled GND, shown in black). Power is supplied to the camera through a Power Cord Socket, connected to an AC Power Adapter. A PC is noted as being required only during setup.
