Manuals+

Factory Reset for ADC-V724/724X Cameras

Resetting a video device to its factory defaults removes all programming and memory from the device.

Important: Wait at least 2 minutes for the video device to power on fully before performing the following procedure. The factory reset might fail if the device is still powering on.

Reset Procedure

Rest procedureReset button locationReset button image description
  1. Press and hold the WPS/Reset button until the LED is flashing green and red (about 15 seconds), then release the button.
  2. The camera will reboot to factory default.
Inside the SD card door on the bottom of the device.

Diagram of the camera showing numbered components:

  • 1. Status LED
  • 2. SD card door
  • 3. SD card slot
  • 4. Speaker
  • 5. Microphone
  • 6. WPS/Reset button

Important: Once a video device has been reset, it is normal for the LED to turn off momentarily. It is best to leave the video device plugged into power and undisturbed for 2 minutes after performing the factory reset.

For more information, visit: Alarm.com Support


File Info : application/pdf, 2 Pages, 244.16KB

PDF preview unavailable. Download the PDF instead.

Factory-reset-an-ADC-724X

References

Prince 12.5 (www.princexml.com)

Related Documents

Preview Factory Reset Guide for Alarm.com ADC-CSVR2000P/2008P/2016P Video Recorders
Learn how to perform a factory reset on Alarm.com Commercial Stream Video Recorders (ADC-CSVR2000P, ADC-CSVR2008P, ADC-CSVR2016P) to restore default settings. Includes step-by-step instructions and important considerations.
Preview Alarm.com ADC-V724 1080p Outdoor Wi-Fi Camera Installation Guide
Comprehensive installation guide for the Alarm.com ADC-V724 1080p Outdoor Wi-Fi Camera with Two-Way Audio. Covers pre-installation checks, package contents, device overview, rubber plug usage, installation via AP Mode and WPS Mode, LED status indicators, troubleshooting tips, and important FCC/ISED notices.
Preview Factory Reset Guide for Alarm.com ADC-VC736 Bullet Camera
A step-by-step guide on how to perform a factory reset on the Alarm.com ADC-VC736 bullet camera to restore its default settings. Includes important notes and a visual description of the reset procedure.
Preview Factory Reset Guide for Alarm.com ADC-CSVR126
Learn how to perform a factory reset on your Alarm.com ADC-CSVR126 video recorder using either the local interface or the physical buttons. This guide provides step-by-step instructions for both methods.
Preview Change Pan/Tilt Camera Position Presets - Alarm.com Guide
Learn how to set and manage position presets for your Alarm.com pan/tilt cameras using the Alarm.com app and customer website. Includes compatible camera models like ADC-V622, ADC-V620PT, and ADC-V610PT.
Preview Alarm.com Stream Video Recorder (ADC-SVR100) FAQs
Frequently asked questions about the Alarm.com Stream Video Recorder (ADC-SVR100), covering camera compatibility, network requirements, internet connectivity, video playback, storage, and hard drive configuration.
Preview 4MP Outdoor Camera Floodlight Installation Guide (ADC-V729/V729AC/VC729P)
This installation guide provides detailed instructions for setting up the Alarm.com 4MP Outdoor Camera Floodlight models ADC-V729, ADC-V729AC, and ADC-VC729P. It covers pre-installation checklists, wiring, mounting, powering, and connecting the cameras, along with troubleshooting tips and regulatory notices.
Preview Alarm.com ADC-V729AC 4MP Outdoor Floodlight Camera Data Sheet
Data sheet for the Alarm.com ADC-V729AC 4MP Outdoor Floodlight Camera, detailing its key features, requirements, and specifications including video quality, lighting, motion detection, and connectivity.