Manuals+

GDW Towbar REF.0334 for VW Golf III & Golf III Cabrio

Vehicle Compatibility: VW Golf III (1992-1997), VW Golf III Cabrio (1992-2002)

Reference Number: REF.0334

Technical Specifications

EEC Approval Number: e6*94/20*0033*00

Specification Value
D/ (Towing Capacity) 7.00 kN
S/ (Vertical Load) 75 kg
Max. (Max. Towing Weight) 1300 kg

Fitting Instructions

  1. Disassemble the rear bumper. Permanently remove the two caps that seal the openings in the chassis.
  2. Mount the towbar by inserting the supporting arms, indicated by symbol (A), into the chassis openings. Align these with the provided drillings and secure them using bolts and washers. Place additional washers under the chassis where indicated.
  3. Re-assemble the bumper. Before doing so, make a cut in the bumper: 6.5cm measured from the bumper's lower rim, 3cm from the bumper's center towards the left side, and 15cm towards the right side.
  4. Mount the component indicated by symbol (*) and securely tighten all fasteners.

Note: The diagrams show specific mounting points labeled (A) and (*).

Parts Composition

  • 1 x Towbar (Reference 0334)
  • 1 x Ball mount (T45M000)
  • 2 x Bolts (M12-70)
  • 4 x Bolts + Nuts (M10-30)
  • 4 x Washers (40-12-4)
  • 2 x Security nuts (M12)
  • 4 x Security washers (10mm)

Parts marked with (*) and (A) correspond to specific mounting points or components as shown in diagrams.

Torque Specifications

Bolt Quality: 8.8 (Standards: DIN931/DIN933/DIN7991)

Bolt Size Torque (Nm) Torque (kgm)
M6 10.8 Nm 1.1 kgm
M8 25.5 Nm 2.60 kgm
M10 52.0 Nm 5.30 kgm
M12 88.3 Nm 9.0 kgm
M14 137 Nm 14.0 kgm
M16 211 Nm 21.5 kgm
M22 265 Nm 27 kgm

Important Notes

  • For the maximum permissible towing weight for your vehicle, please consult your car dealer or owner's manual.
  • Remove any bitumen coating or anti-vibration material from the fastening points before installation.
  • When drilling, exercise caution to avoid damaging any brake lines, electrical wiring, or fuel lines.

PDF preview unavailable. Download the PDF instead.

VW9017 Canon

Related Documents

Preview GDW Tow Bar Installation Guide for Mercedes Sprinter (1996-...) - Model 0463
Comprehensive installation guide and technical specifications for the GDW tow bar (Ref. 0463) designed for the Mercedes Sprinter Type 412 with double rear wheels (1996 onwards). Includes EEC approval, parts list, and torque settings.
Preview GDW Tow Bar Installation Guide for Mercedes E-210 (1995-2000)
This document provides comprehensive fitting instructions and technical specifications for the GDW tow bar (Ref. 0441) designed for the Mercedes E-210 model manufactured between 1995 and 2000. It includes multilingual installation steps, a parts list, diagrams, and torque specifications.
Preview GDW Tow Bar Installation Guide for Opel Vectra B (1995-2000)
Comprehensive installation instructions, parts list, and technical specifications for the GDW tow bar (Ref. 1113) designed for the Opel Vectra B models from 1995 to 2000.
Preview GDW Towbar Installation Guide for Volkswagen Tiguan (2007+)
Comprehensive guide for installing the GDW towbar (Ref. 1700) on Volkswagen Tiguan models from 10/2007 onwards, including component lists, torque specifications, fitting instructions, and important usage advice.
Preview Skoda Fabia Combi (2008-...) Towbar Installation Guide and Specifications
Comprehensive guide for the GDW towbar (Ref. 1691) for the Skoda Fabia Combi (2008 onwards). Includes detailed installation instructions, parts list, technical specifications, torque settings, and important usage advice.
Preview GDW Tow Bar for Ssang Yong Rexton (2002-...) - Fitting Instructions & Specifications
Comprehensive fitting instructions, parts list, and technical specifications for the GDW tow bar (Ref. 1501) for the Ssang Yong Rexton (2002 onwards). Includes torque values and clearance requirements, merging Dutch, French, German, and English content.
Preview GDW Tow Bar Installation Guide for Hyundai Santa Fe (2000-....) - Ref. 1299
Detailed installation instructions and specifications for the GDW tow bar (Ref. 1299) designed for the Hyundai Santa Fe model years 2000 onwards. Includes parts list, fitting steps, and technical data.
Preview GDW Towbar Installation Guide for Rover 4-Series Sedan (1996-1999)
Comprehensive installation instructions and technical specifications for the GDW towbar (Ref. 0421) designed for the Rover 4-Series Sedan models from 1996 to 1999. Includes parts list, fitting details, and clearance requirements.