Yaheetech Chair Assembly and Care Guide
Assembly Requirements
We recommend 1 or more people to install.
Assembly Time
The expected assembly time is 0.5 hours.
Safety Warnings
Not intended for use by children.
Keep away from fire or other heat sources.
We recommend wearing protective gloves.
Assembly Guidance
Please follow the instruction manuals and use a pad to avoid damage during assembly.
Diagram shows a person placing a box on a bare floor, then attempting to assemble a chair, with a red cross indicating an incorrect method. A second diagram shows a person placing a protective pad on the floor, then assembling the chair on top of it, with a green checkmark indicating the correct method.
Parts List
| Part | Description | Quantity |
|---|---|---|
| ① | Main body/seat base | 1 |
| ② | Cushion | 1 |
| ③ | Left armrest frame | 1 |
| ④ | Right armrest frame | 1 |
| L | Left side panel | 1 |
| R | Right side panel | 1 |
| A | Bolt | 9 |
| B | Washer | 7 |
| C | Cap/Nut | 7 |
| D | Allen key | 1 |
| E | Screw | 2 |
Assembly Steps
Step 1
During the assembly, please first half-tighten all the screws into the holes. After all the screws are set, fully tighten them.
Diagram shows part 1 (base) and part 2 (support) being joined. Screws labeled A (x3), B (x3), and C (x3) are shown being inserted with an Allen key. The instruction emphasizes half-tightening.
Step 2
During the assembly, please first half-tighten all the screws into the holes. After all the screws are set, fully tighten them.
Diagram shows the main chair frame (part 3) being attached to the base (part 1). Screws labeled A (x3), B (x2), C (x2), and E (x1) are shown being inserted. The instruction emphasizes half-tightening.
Step 3
During the assembly, please first half-tighten all the screws into the holes. After all the screws are set, fully tighten them.
Diagram shows the other side of the chair frame (part 4) being attached to the base (part 1) and support (part 2). Screws labeled A (x3), B (x2), C (x2), and E (x1) are shown being inserted. The instruction emphasizes half-tightening.
Step 4
Diagram shows the assembled chair frame. An arrow indicates a final connection or adjustment point.
Step 5: Final Adjustments
Screw in the adjustable feet to keep the chair balanced.
Close-up view of a chair leg showing an adjustable foot being screwed in or out to level the chair. Arrows indicate vertical adjustment and rotation.
Maintenance and Care
Velvet Care
Vacuum your piece monthly to keep the velvet looking like new. Use a nylon brush to remove any dirt or food. Contact a professional annually for a deep clean.
Stubborn Stains
Blot stains with a damp cloth and a dash of dish soap. Wipe away excess water with a clean towel. Let the material air-dry fully before use.
Additional Tips and Preventative Care
Additional Tips
Vacuum to remove any loose crumbs or dirt. If you have a pet, use a lint roller to gather up any fur.
Preventative Care
Rotate pillows and cushions monthly to ensure even wear. Avoid placing your piece in direct sunlight to prevent fading. Consider adding a slipcover, as most are machine-washable and can change up your style.
Support and Downloads
Contact Us
If you are not entirely satisfied with your purchase, please follow these steps: Go to Your Orders, find your order, select 'Problem with order', choose your topic, and select 'Contact seller'.
Download Manuals
You can also download the electronic Installation Manual from the Product guides and documents section of the advertising page.
