Fresh 'n Rebel Clam Junior Quick Start Guide

First Time Pairing

To pair your Clam Junior headphones for the first time:

• Turn on your headphones.
• On your device (phone, tablet, etc.), go to Bluetooth settings.
• Select "Clam Junior" from the list of available devices.
• The headphones will connect, indicated by the device status changing to "CONNECTED" and the LED on the headphones.

(Diagram: Shows a smartphone screen displaying Bluetooth settings with "Clam Junior" selected and a "CONNECTED" status, alongside the headphones.)

Disconnect a Paired Device

To disconnect a paired device:

• Press and hold the button on the headphones for 1 second.
• The headphones will disconnect, indicated by the device status changing to "DISCONNECTED".

(Diagram: Shows a smartphone screen displaying Bluetooth settings with "Clam Junior" disconnected, alongside the headphones with a hand pressing a button.)

Long press: Press and hold the button for an extended period.

LED Behaviour

Understand the LED indicators on your headphones:

• Blinking Slowly: Searching for connection.
• Blinking Fast: Pairing mode.
• Breathing: Connected / Music paused.
• Solid: Playing music.

To switch off the LEDs, follow the instructions shown in the diagram.

(Diagram: Illustrates turning off the LEDs, showing a button press action.)

Music Controls

Control your music playback:

• Play/Pause: Press the button once. (Visual cue: Play/pause icon)
• Next Track: Press the button twice. (Visual cue: Double press symbol)
• Voice Assistant: Press and hold the button. (Visual cue: Voice assistant icon)

Phone Calls

Manage your phone calls:

• Answer/End Call: Press the button once. (Visual cue: Phone icon with an upward arrow)
• Reject Call: Press and hold the button. (Visual cue: Phone icon with a downward arrow)
• Volume Up: Press the volume up button. (Visual cue: Volume up icon)
• Volume Down: Press the volume down button. (Visual cue: Volume down icon)

ANC Operation

Activate or deactivate Active Noise Cancelling (ANC) by pressing the ANC button.

(Diagram: Shows the headphones with an ANC button being pressed.)

Charging the Headphones

To charge your headphones:

• Connect the charging cable.
• Blinking (for 1 minute): Charging.
• Solid (for 1 minute): Fully charged.

(Diagrams: Show headphones connected to a charger, illustrating the LED indicators for charging and fully charged states.)

Button Operation in Wired Mode

When using the headphones in wired mode:

• Power Off: Follow the indicated button press sequence. (Visual cue: Multiple 'X' symbols and a power off symbol)
• Power On: Follow the indicated button press sequence. (Visual cue: Checkmark symbol and a power symbol)

Legal & Compliance Information

General Information:

• Model Number: 3JHP3000 v1 001
• Manufacturer: Sitecom Europe B.V., Linatebaan 101, 3045 AH Rotterdam, The Netherlands

Conformity: This product complies with EU Directive 2014/53 (RED) and other applicable EU regulations. Operating frequency: 2400-2480 MHz. Max RF power: 20 dBm / 100 mW. Full declaration available at: https://www.freshnrebel.com/cedoc/3JHP3000.pdf.

Disposal: The product is classified as Electrical/Electronic equipment and must be recycled according to WEEE Directive 2012/19/EU. Contact local authorities for proper disposal.

Warnings:

• Follow all instructions. Do not disassemble, modify, open, or repair yourself.
• Avoid liquids, damp/wet environments, excessive heat, open fire, and abrupt temperature changes. Do not burn.
• Contains a 3.7V 400mAh Lithium battery. Do not open or replace; risk of explosion if mishandled.
• Dispose of device at a recycling center to prevent environmental pollution.
• Do not use headphones while driving, operating machinery, cycling, or in other distracting activities. Keep volume low to hear surroundings and protect hearing. Obey local laws.
• Prolonged exposure to loud noise can cause hearing loss. Minimize exposure to loud noise and keep volume low for conversation.

Copyright: 2024 Sitecom Europe B.V. All rights reserved. Bluetooth® wordmark and logos are registered trademarks of Bluetooth SIG, used under license.

Packaging Information

Packaging materials are selected for environmental friendliness and are recyclable. Dispose of packaging materials according to local regulations.

(Visuals: Recycling symbols for paperboard, paper collection, FSC certification, and mixed materials.)