Rohnson R-1239 Stick Vacuum Cleaner - User Manual
This manual provides instructions for the Rohnson R-1239 stick vacuum cleaner. Please read and follow all instructions for safe and effective use. Keep this manual for future reference.
Important Safety Instructions
Read carefully and keep for future use:
- Failure to follow instructions in this manual may void the warranty. The manufacturer/importer is not responsible for damages caused by not following the manual's instructions. Negligent use of the appliance is not in accordance with the terms of this manual.
- Before connecting the appliance to a power outlet, ensure the voltage indicated on the appliance's rating plate matches the outlet's voltage.
- Connect the appliance only to a properly earthed socket.
WARNINGS
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance must not be made by children unless they are older than 8 years and supervised. Keep the appliance and its power cord out of reach of children younger than 8 years.
- Children shall not play with the appliance.
- Do not use the appliance for purposes other than those for which it is intended.
- The appliance is not intended to be operated by means of an external timer, a separate remote-control system, or any other device that switches the appliance on automatically.
- Always switch off and unplug the appliance from the mains socket when not in use or before cleaning.
- Do not use the appliance if it is not functioning correctly, has been dropped, damaged, or immersed in water. Do not use the appliance with a damaged power cord. Never attempt to repair the appliance yourself. Do not modify the appliance, as this creates a risk of electric shock. Entrust all repairs and adjustments of this appliance to an authorized service center.
- Do not disconnect the appliance from the mains socket by pulling the power cord – this may damage the power cord/socket.
- Ensure the power cord does not touch hot surfaces. Avoid contact of the power cord with sharp edges or corners, do not pinch it in doors, and do not pull it. Do not run the appliance over the power cord.
- The appliance is intended for household use only. It is not intended for use in outdoor areas. It is not intended for commercial use.
- Do not store the appliance near heat sources.
- Do not use in the vicinity of explosive or flammable substances.
- Do not leave the appliance unattended while in operation.
- Do not touch the appliance, power cord, or plug with wet hands.
- Do not cover the air inlet and outlet openings, and do not insert any objects into them. Ensure the openings are not blocked.
- If the suction opening, floor brush, or tube is clogged/blocked by objects, switch off the appliance immediately and remove the obstructing object.
- Before using the appliance, ensure it is correctly assembled.
- Always switch off the appliance before unplugging it from the mains.
- Keep loose clothing and all body parts away from the openings and moving parts of the appliance.
- Disconnect the appliance from the mains before connecting accessories.
- Do not use the appliance to vacuum wet surfaces. Do not vacuum liquids.
- Do not vacuum flammable, volatile, or toxic substances (e.g., gasoline, acids, etc.).
- Do not vacuum hot ash or smoldering objects.
- Do not vacuum sharp objects, broken glass, needles, thumbtacks, or strings.
- Do not vacuum cement or construction dust.
- Do not use the appliance without properly installed filters. Never use the appliance with damaged filters.
- Do not immerse the appliance or power cord in water or other liquids. Prevent water from entering the appliance.
- Do not use the appliance with an extension cord.
- Use only with the supplied accessories.
Appliance Description
The appliance consists of the following parts:
- Power cord
- On/off button
- Dust container release button
- Dust container emptying button
- Suction opening
- Tube
- Floor brush
- Combination brush 2-in-1
- Soft floor roller
- Carpet roller brush
- Crevice nozzle
- Wall mounting bracket
Using the Appliance
- Connect the tube to the appliance.
- Connect the floor brush to the tube and plug the appliance into the mains.
- Turn on the appliance by pressing the on/off button.
- Use the soft roller for floors and the roller brush for carpets.
- Both attachments can also be connected directly to the appliance's suction opening (without using the tube).
- The combination and crevice nozzles are suitable for radiators, narrow spaces, corners, and sofas.
CAUTION
The roller brush has moving parts! Do not touch the brush while the device is running to prevent injury! Scratches, cuts, and other similar injuries may occur. Always switch off the vacuum cleaner before manipulating the roller brush. Be careful when using the vacuum cleaner in the presence of children.
The suction opening must always be clear and must not contain any foreign objects. If the suction opening is clogged, the motor may overheat.
Attaching the Wall Bracket
- You can attach the bracket using screws or 3M double-sided adhesive tape.
- Before installation, check that the bracket is facing upwards.
Cleaning and Maintenance
- Always switch off and unplug the appliance from the mains before cleaning.
- Wipe the appliance with a dry cloth. Do not use aggressive cleaning agents.
- If you do not use the appliance for a long time, store it in its original packaging in a dry place.
Emptying the Dust Container
- To ensure optimal performance, empty the dust container regularly. Empty the container whenever it is filled to the MAX line or if the suction power decreases. Procedure:
- Switch off the appliance and unplug it from the mains.
- Hold the dust container over a waste bin and open the bottom of the container.
- Remove all dirt by gently shaking.
Cleaning the Filters
- Regularly clean the plastic filter and HEPA filter to ensure maximum vacuuming efficiency and prolong the appliance's lifespan (at least once a month).
- Always clean the filters if they are dusty or if the appliance's suction power significantly decreases. Procedure:
- Switch off the appliance and unplug it from the mains.
- Open the bottom of the dust container.
- Remove the filters by turning them clockwise. Wash the plastic filter and HEPA filter in clean, lukewarm water, and if necessary, remove dirt with a soft brush. Let them dry completely for at least 24 hours. Then, return the filters to the appliance and secure them by turning them counterclockwise.
- Do not use any cleaning agents to clean the filters. Do not wash filters in a washing machine or use a hairdryer to dry them.
- The filters must be completely dry before using the appliance again.
- The lifespan of the HEPA filter is approximately 1 year depending on usage. The replacement HEPA filter is designated R-1239Hepa.
Note: Do not wash the filters in a dishwasher or dry them with a hairdryer. Never vacuum without the HEPA filter.
Cleaning the Motorized Brush
- The motorized brush needs to be cleaned regularly. During use, dirt such as thread ends, hair, pet hair, etc., can accumulate on it. Regular cleaning is necessary to ensure maximum efficiency.
- Wipe the floor brush from above with a damp cloth.
- Release the lock on the roller brush and remove the side cover.
- Remove the roller from the brush head by sliding it sideways.
- Wipe or rinse the roller with running water. Remove all hair and dirt.
- The roller must dry completely in the open air.
- Place the roller back into the brush head and secure the lock.
Troubleshooting
Problem | Possible Cause | Solution |
---|---|---|
Appliance not working | 1. Power is not functioning or the power cord is not properly plugged into the socket. 2. The appliance is not switched on. |
1. Check the power supply and plug the socket back in. 2. Switch the appliance ON. |
Unusual vacuuming sound | The dust container is full, or the suction opening is clogged. | Empty the dust container and clear the suction opening. |
Low suction power | 1. The dust container is full. 2. The filter needs cleaning. 3. A new filter needs to be inserted. 4. The vacuum cleaner is not correctly assembled and accessories are not properly fitted. 5. The brush or hose is clogged. |
1. Empty the dust container. 2. Clean the dust filter. 3. Purchase a replacement R-1239Hepa filter. 4. Follow the assembly instructions for the device. 5. Clear the brush or hose according to instructions. |
Dust blowing from the vacuum cleaner during vacuuming | 1. The HEPA filter is missing from the dust container. 2. The HEPA filter is not inserted correctly. 3. The HEPA filter is damaged. |
1. Check if the HEPA filter has been inserted. 2. Insert the HEPA filter according to instructions. 3. A new HEPA filter needs to be purchased. |
Technical Specifications
Nominal voltage range | 220-240 V |
---|---|
Nominal frequency | 50-60 Hz |
Nominal maximum input power | 700 W |
Text and technical data subject to change.
Instructions and Information on Handling Used Packaging
Dispose of used packaging material at a municipal waste collection point.
DISPOSAL OF WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on the products or in the accompanying documents means that used electrical and electronic products must not be mixed with general household waste. For proper disposal, recovery, and recycling, please take these products to designated collection points. Alternatively, in some EU countries or other European countries, you may return your products to your local retailer when purchasing an equivalent new product. By disposing of this product correctly, you will help to conserve valuable natural resources and prevent potential negative impacts on the environment and human health, which could otherwise result from inappropriate waste handling.
CE This product complies with all essential requirements of the relevant EU directives.