Casio Watch Module Manual

Casio Module Numbers

The following module numbers are covered in this manual:

705, 706, 707, 708, 709, 1300, 1309, 1311, 1330, 1331, 1332, 1333, 1334, 1335, 1336, 1342, 1344, 1345, 1346, 1347, 1360, 1362, 1369, 1370, 1373, 1398, 1399, 1701, 1710, 1711, 1747, 1770, 1771, 1782, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 2799, 3363, 3378, 3711, 3712, 3716, 4328, 4370, 4393, 4394, 4747, 5025, 5044, 5049, 5058, 5116, 5125, 5128, 5167, 5180, 5199, 5206, 5207, 5218, 5223, 5237, 5249, 5250, 5284, 5339, 5340, 5341, 5342, 5343, 5352, 5358, 5361, 5364, 5373, 5375, 5383, 5393, 5436, 5458, 5474, 5507, 5532

The CASIO logo is displayed, along with abstract shapes representing watch dials and a symbol indicating water resistance rating.

The Russian text "Руководство по пользованию функциями часов" translates to "User Manual for Watch Functions".

Water Resistance

Important Information: Read This First

For all categories of watches, the following are prohibited:

• Pressing buttons underwater.
• Changing hands underwater.
• Unscrewing the crown underwater.

If the watch is exposed to salt water, rinse it thoroughly and dry it. Do not wear a watch with a leather strap while swimming. Avoid prolonged contact of leather straps with water.

Watches are classified by water resistance ratings (from I to V) according to their degree of protection against water. Consult the table below to determine the correct usage for your watch.

Notes:

• Rating I: Watches are not protected against water. Avoid any moisture.
• Rating II: WR (Water Resistant) means the model is waterproof according to ISO 2281. Brief contact with water will not cause problems.
• Rating III: Watches with 5 BAR (50 meters) water resistance can withstand water pressure as indicated and can be used while showering and for brief swimming.
• Rating IV: 10 BAR (100 meters) water resistance means the watch can be used during normal swimming and snorkeling.
• Rating V: 20 BAR (200 meters) water resistance means the watch can be used for scuba diving (except for depths requiring helium-oxygen mixtures).

When using the product in conditions of rapid temperature changes, slight condensation may form on the inside of the glass. This phenomenon is due to the laws of physics and is not a defect.

CASIO COMPUTER CO., LTD. is not responsible for any damage that may occur during the use of these watches and does not accept any claims from third parties.

Crown Operation

Your watch may differ slightly from the illustrations in this manual.

Note: Some water-resistant models are equipped with a screw-lock crown.

• To pull out such a crown, you must first unlock it by turning it in the direction indicated in the illustration. Do not apply excessive force when pulling out the crown, as this may damage it.
• Be aware that the watch becomes unprotected from water and moisture when the crown is pulled out. After completing any operations with the crown, return it to its original position and lock it.

Illustration: A watch with a crown labeled "Заводная головка" (Crown). An arrow indicates the direction to turn for unlocking.

Setting the Current Time

The procedure for setting the current time varies depending on the module.

Modules 1362, 1398, 1770, 2799, 3378, 4370

Pull out the crown. Turn it to set the hands to the current time. Push the crown back to its original position.

Illustration: A watch with the crown pulled out, labeled "Заводная головка" (Crown).

Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 1782, 4328, 4394, 4747, 5049, 5284, 5361, 5364, 5375, 5577

1. When the second hand is at the 12 o'clock position, pull out the crown. The second hand will stop.
2. Turn the crown to set the hands to the current time. Set the minute hand 4-5 minutes ahead of the current time, then turn it back.
3. Close and secure the crown upon hearing the time signal.

Illustration: Watches showing time setting. The crown is labeled "Заводная головка" (Crown). Arrows indicate crown positions and setting directions.

Modules 707, 708, 1331, 1332, 1335, 1336, 1342, 1345, 1346, 1369, 1370, 1373, 1701, 1710, 1711, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, 4393, 5025, 5044, 5058, 5116, 5128, 5180, 5199, 5206, 5207, 5218, 5250, 5340, 5341, 5342, 5343, 5352, 5358, 5383, 5393, 5436, 5507, 5532

1. When the second hand is at the 12 o'clock position, pull out the crown. The second hand will stop.
2. Turn the crown to set the hands to the current time. To fine-tune the current time, move the minute hand back 4-5 minutes from the desired value, then return it to the current value.
3. Push the crown back to its original position to resume time display.

Illustration: A watch face showing the crown positions: "Заводная головка (нормальная позиция)" (Crown (Normal Position)), "Первый щелчок установка даты" (First click date setting), "Второй щелчок установка времени" (Second click time setting). A date display shows "30".

Modules 709, 1309, 1333, 1334, 1347, 3716, 5125, 5167, 5223, 5237, 5249, 5339, 5373, 5458, 5474

Setting the Current Time:

1. When the second hand is at the 12 o'clock position, pull out the crown. The second hand will stop.
2. Turn the crown to set the hands to the current time. For more precise setting, move the minute hand back 4-5 minutes from the desired value, then return it to the current value.
3. Push the crown back to its original position to resume time display.

Illustration: Two watches showing time setting. The crown is labeled "Заводная головка (нормальная позиция)" (Crown (Normal Position)). Indicators show "Первый щелчок установка даты и дня недели" (First click date and day of week setting) and "Второй щелчок установка времени" (Second click time setting).

Setting the Date and Day of Week

To ensure the date and day of week change at midnight, do not perform date settings between 8:00 PM and 2:00 AM.

1. Pull out the crown to the first click.
2. Set the date by turning the crown counter-clockwise.
3. Set the day of the week by turning the crown clockwise. Day of the week abbreviations are in English or Spanish.

4. Push the crown back to its original position.

Watches with Backlight

• Press and hold the L button to illuminate the watch face.
• Depending on the model, the backlight duration is 2 to 3 seconds, or 1 second, or until the L button is released (Module 5577).
• Depending on the model, the backlight is provided by electroluminescent (EL) elements or LEDs. EL elements lose power after prolonged use.
• Frequent use of the backlight shortens battery life.
• Activating the backlight for an extended period or with a low battery charge may cause the watch hands to stop moving for a while.

Illustration: Watches showing the backlight button labeled "L (Кнопка подсветки)" (L (Backlight Button)) and the crown labeled "Заводная головка" (Crown).

Watches with Rotating Bezel

Turn the bezel to align the marker with the minute hand. After some time, you can tell how much time has passed since you aligned the marker with the minute hand.

Illustration: A watch with a rotating bezel, labeled "Безель для измерения прошедшего времени" (Bezel for measuring elapsed time).

Technical Specifications

Technical specifications are subject to change without prior notice.

Product Information

Product Name: Electronic / Electro-mechanical quartz wristwatches (men's/women's)

Brand: CASIO

Manufacturer: CASIO COMPUTER Co., Ltd. (CASIO Computer Co., Ltd.)

Manufacturer Address: 1-6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan

Importer: OOO "Kasio", 127015, Russia, Moscow, Butyrskaya st., bld. 77

Warranty Period: 2 years

Address of Authorized Organization for Claims: Specified in the warranty card.