Rack
Product ID: 7XEDP
Distributed by: GARVEE.com
Support: support@garvee.com
Assembly Guide
This document provides assembly instructions for the GARVEE Rack, Product ID 7XEDP. Two variants are detailed below, each with a specific parts list and assembly steps.
Variant 1 Assembly
Parts List:
- A*1: Main Panel
- B*2: Side Panels
- C*6: Screws
- D*4: Caps
- E*4: Brackets
- F*4: Brackets
- G*4: Screws
Assembly Steps:
- Step 1: Attach side panels (B) to the main panel (A) using screws (C, G), caps (D), and brackets (E, F).
- Step 2: Attach a triangular support piece (labeled B in diagram) to the main panel (A).
- Step 3: Peel off the protective film from the assembled components.
Variant 2 Assembly
Parts List:
- A*1: Main Panel
- B*3: Side Panels
- C*9: Screws
- D*4: Caps
- E*4: Brackets
- F*4: Brackets
- G*4: Screws
Assembly Steps:
- Step 1: Attach side panels (B) to the main panel (A) using screws (C, G), caps (D), and brackets (E, F).
- Step 2: Attach a triangular support piece (labeled C in diagram) to the main panel (A).
- Step 3: Attach a second triangular support piece (labeled C in diagram) to the main panel (A).
- Step 4: Peel off the protective film from the assembled components.
