Redragon Fizz Pro 3 Modes Mechanical Gaming Keyboard

User Information

Thank you for choosing a Redragon product. To protect your rights and for better customer service, please read the following warranty rules carefully.

• Within 18 months of purchase date, repair is guaranteed for failure due to electrical circuit problems. Other damages, such as disassembly, hard impacts, submersion into water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquake are not included.
• Consumable parts (such as foot pads) and spare parts replacement are not included in our warranty.

OS Support

Windows XP/Vista/Win7/Win8/Win10

How to Connect the Keyboard with a Computer

Wired Connection

1. Slide the 2.4G/OFF/BT switch on the bottom of the keyboard to OFF.
2. Connect the keyboard to your computer using the included USB A to USB Type C cable.
3. The computer will recognize and configure the keyboard automatically.
4. The keyboard will be ready for use when the configuration is finished.
5. Charging begins when the keyboard is powered up. The LED marked with 'M' lights red and turns white when the keyboard is fully recharged.

2.4G Wireless Connection

1. Slide the 2.4G/OFF/BT switch on the bottom of the keyboard to 2.4G.
2. Plug the nano USB receiver into an available USB port on your computer. The computer will recognize and configure the keyboard automatically.
3. The keyboard will be ready for use when the configuration is finished.
4. In some cases, you may need to pair the keyboard. Turn on the keyboard and press [FN1] + [2.4G] for about 3 seconds. The LED marked with 'M' flashes green. Plug the USB receiver into any available USB port on your computer within 20 seconds. The keyboard will be paired automatically. Ensure the keyboard has enough power before doing so.
5. The indicator will flash when the battery is low. Please recharge the keyboard in time, or it will turn off automatically soon.

Bluetooth Connection

1. Slide the 2.4G/OFF/BT switch on the bottom of the keyboard to BT.
2. Press [FN1] + [BT1] (or [BT2]/[BT3] for other Bluetooth devices). The LED marked with 'M' flashes blue (or cyan/magenta for others).
3. Turn on Bluetooth and scan for available devices on your computer or smartphone. It will find "BT3.0KB" or "BT5.0 KB" devices. Select the device and it will connect automatically.

Function Introduction

With standard USB and 2.4G/BT connections, the keyboard can be used on computers without any software or driver installation.

Backlight Effects

There are 20 backlight effects.

Key Combinations with [FN] Key

• [FN + ESC]: ~
• [FN + 1]: F1
• [FN + 2]: F2
• [FN + 3]: F3
• [FN + 4]: F4
• [FN + 5]: F5
• [FN + 6]: F6
• [FN + 7]: F7
• [FN + 8]: F8
• [FN + 9]: F9
• [FN + 0]: F10
• [FN + Win]: Disable or enable the [Win] key.
• [FN + Q]: Select Bluetooth device one (for Bluetooth connection).
• [FN + W]: Select Bluetooth device two (for Bluetooth connection).
• [FN + E]: Select Bluetooth device three (for Bluetooth connection).
• [FN + R]: Change to 2.4G wireless connection. Press and hold [FN] + [4] for 3 seconds to pair the keyboard with its receiver.
• FN + P = PRTSC
• FN + {[ = HOME
• FN + ]} = END
• FN + ;: = PGUP
• FN + " = PGDN
• FN + .> = INSERT
• FN + /? = DELETE

Key Combinations with [FN2] Key

• [FN2] + [F8]: Change backlight mode. There are 20 backlight effects.
• [FN2] + [F9]: Change backlight color.
• [FN2] + [F10]: Turn On or Off the backlight.
• [FN2] + [F11]: Decrease the backlight brightness of the keyboard.
• [FN2] + [F12]: Increase the backlight brightness of the keyboard.
• [FN2] + [Z]: Slow down the running speed of backlight.
• [FN2] + [X]: Speed up the running speed of backlight.
• FN2 + [A/S/D/W] = ←/↓/→/↑
• [FN2] + [CapsLK]: Reset the keyboard to default settings.

How to Set the Backlighting

Press FN2 + Backspace to start setting. The AWSD keys will default to green. Press FN2 + Backspace again; CapsLock will flash red. Press the desired key for color setting. Single key colors can be set to Red/Green/Blue/Yellow/Purple/Cyan/White/OFF with each click. Once the desired color is fixed, press FN2 + Backspace again to save the setting. Press FN2 + 8 to exit setting mode.

How to Charge Keyboard

Find the USB A to USB Type C cable in the packaging. Plug the keyboard and connect it to your computer for charging. The LED indicator of the keyboard will turn red. The LED indicator will turn red when the keyboard is out of battery.

Indicators on Keyboard

• 'A' is for Caps Lock indication.
• 'M' is for connection mode indication.

FAQ

1. If the keyboard doesn't respond, please check if the keyboard's USB cable is correctly inserted into the corresponding USB port on the computer, or try another USB port on the computer.
2. If you spill liquid on the keyboard, please remove the keyboard's USB cable from the computer immediately. Wipe up excess liquid and place the keyboard in a warm place (e.g., under a lamp) to let it dry naturally before using it again.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

REDRAGON

FIZZ PRO

3 MODES MECHANICAL GAMING KEYBOARD

Please scan here to download user manual.

Mechanical Gaming Keyboard Operating Instructions

Model: Redragon K616-RGB/8559

Date: 2021-11-12

Drawing: Lei Guojian

Description: Manual

Material: 80g Writing Paper

Printing: Single Black Double-Sided Printing

Version: A.0