Redragon Eisa Pro Mechanical Keyboard

Warranty Information

Thank you for choosing Redragon. Please read the following warranty rules carefully:

• Repair is guaranteed for failure due to electrical circuit problems within 18 months of purchase.
• Damages from disassembly, impacts, submersion, improper voltage, or natural disasters are not covered.
• Consumable parts and spare parts replacement are not included in the warranty.

Keyboard Layout and Functions

The keyboard features a 98-key layout with various function keys and a control knob.

MAC OS Key Combinations:

• FN + F1-F12: Screen brightness, multiple task, Siri, computer desk, search, media controls (previous, play/pause, next), mute, volume up/down.
• FN + P: Home
• FN + [: END
• FN + ]: SCRLK
• FN + ;: PRTSC
• FN + ': PAUSE

Windows OS Key Combinations:

• FN + F1-F12: Screen brightness, multiple task, voice control, computer desk, search, media controls (previous, play/pause, next), mute, volume up/down.
• FN + P: Home
• FN + [: END
• FN + ]: SCRLK
• FN + ;: PRTSC
• FN + ': PAUSE

Knob Functionality:

• Default: Volume control. Short press to mute/unmute.
• Long press (3s): Switches knob function to brightness control. Short press to cycle through 20 backlight patterns. Long press again (3s) to switch back to volume control.

Backlight Settings:

• FN + INS: Change backlight mode.
• FN + PGUP: Change backlight color.
• FN + [ / ]: Adjust backlight speed (slow down/speed up).
• FN + ↑ / ↓: Adjust backlight brightness (level up/level down).
• FN + ESC (hold 3s): Reset to default settings.

Connectivity Options

The keyboard supports three modes of connection:

Wired Connection:

1. Slide the switch to 'OFF'.
2. Connect the USB Type-C cable to the keyboard and computer.
3. The 'M' indicator LED will turn green. Charging begins, indicated by a red LED.

2.4G Wireless Connection:

1. Slide the switch to '2.4G'.
2. Press and hold [FN] + [4] for 3 seconds; the 'M' indicator LED will flash yellow.
3. Plug the USB receiver into a computer USB port within 20 seconds.
4. The computer will automatically recognize and configure the keyboard. The 'M' indicator LED will be solid yellow.

Bluetooth Connection:

1. Slide the switch to 'BT'.
2. Press [FN] + [1] (or [2]/[3] for other devices); the 'M' indicator LED will flash blue (or cyan/magenta).
3. Turn on Bluetooth on your computer or smartphone and scan for devices. Select 'BT3.0 Keyboard' or 'BT5.0 KB' to connect.

OS Support:

Supports Windows (XP/Vista/7/8/10/11) and Mac OS.

MAC/WIN switch: Slide the switch on the left side of the keyboard to select the operating system.

Power Management and Charging

Keyboard Sleep Mode:

• In 2.4Ghz and Bluetooth modes, the keyboard enters sleep mode after a period of inactivity to save power. All LEDs and backlights turn off. Click any key to wake it up.
• Power Save Mode: Backlights turn off after 3 minutes of inactivity.
• Sleep Mode: Backlights turn off and 2.4G connection is inactive after 30 minutes of inactivity.

Recharging the Keyboard:

• Use the provided USB A to USB Type C cable to connect the keyboard to a computer for charging.
• Battery Indicator LEDs:
  • Red: < 20% power
  • Purple: < 40% power
  • Blue: < 60% power
  • Cyan: < 80% power
  • Green: 80%+ power
• Battery Status Check: Press FN + ALT. The number keys [1] through [0] indicate power status from 0%-100%. If [1] and [3] are lit red, the keyboard has low power and needs charging.

Battery Safety Guidelines

CAUTION: Failing to follow all safety guidelines may result in product damage, explosion, fire, and/or electric shock.

• DO NOT replace the battery with a different model.
• DO NOT use if the battery shows signs of damage (tearing, deformation, leakage, odor).
• DO NOT touch leaking battery material; seek medical attention if contact occurs.
• DO NOT expose the battery to liquid, heat, electricity (outside the product), or non-standard conditions.
• DO NOT remove the battery except for proper disposal and recycling.
• DO NOT impact, bend, alter, or disassemble the battery.

Troubleshooting (FAQ)

1. Keyboard not responding: Ensure the USB cable is correctly connected or try a different USB port.
2. Liquid spill: Immediately unplug the USB cable. Wipe off excess liquid and allow the keyboard to dry naturally in a ventilated place before next use.

Regulatory Information

Innovation, Science and Economic Development Canada:

This device complies with Industry Canada's licence-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation.

FCC Statement:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Product Details

Model Names: K686AK-RGB-PRO/7199, K686WB-RGB-PRO/7199

Description: 3-MODES 98 KEY GASKET HOT-SWAPPABLE RGB MECHANICAL KEYBOARD

Manufacturer: Redragon

Document Version: A.1

Date: 2024-5-7 (Revised)