Safety Warning
WARNING! Serious or fatal crushing injuries can occur from furniture falling down. To prevent this furniture from falling down, it must be used with the wall attachment device(s) provided.
Screw(s) and plug(s) for the wall are not included. Assess the suitability of the wall to ensure that it will withstand the forces generated. Use screw(s) and plug(s) suitable for your walls and the intended load. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
Parts List
| Part | Description | Quantity | Part Number |
|---|---|---|---|
[Screw] |
Standard metal screw | 12x | 112996 |
[Cam Lock] |
Circular metal fitting with a slot for tightening | 12x | 113434 |
[Dowel] |
Wooden or plastic cylindrical peg | 8x | 10046940 |
[Screw] |
Standard metal screw | 4x | 10035574 |
[Dowel] |
Wooden or plastic cylindrical peg | 12x | 101351 |
[Bracket] |
Metal L-shaped bracket | 2x | 124526 |
[Mounting Bracket] |
Metal bracket for wall mounting | 2x | 10036383, 10039201 |
[Fastener Pack] |
Bag containing various screws and nails | 1x | 319503 |
[Frame/Rail Component] |
Long metal component with slots, available in 24", 30", 36" lengths | 1x each | 10116456, 10116457 |
Assembly Instructions
Step 1: Prepare Panels
Insert 12 screws (112996) into the pre-drilled holes on the edges of two main panels.
Step 2: Connect Panels
Join the two panels. Insert 2 dowels (10049278) and 2 cam locks (10046940) into the corresponding holes. Tighten the cam locks by turning them clockwise with a [screwdriver].
Step 3: Attach Side Panels
Attach two side panels to the base panel using 6 screws (101351) for each side panel.
Step 4: Secure Side Panels
Secure the attached side panels using 6 cam locks (113434) for each side panel, turning them clockwise.
Step 5: Insert Back Panel/Divider
Slide a thin panel (likely a back panel or internal divider) into the grooves on the side panels.
Step 6: Attach Horizontal Support
Attach a horizontal support panel to the structure using 6 dowels (101351).
Step 7: Secure Horizontal Support
Secure the horizontal support panel using 6 cam locks (113434), turning them clockwise.
Step 8: Attach Top Panel
Place the top panel onto the structure. Perform a 90-degree rotation and secure it with screws (319503).
Step 9: Attach Drawer Runner/Support
Attach a drawer runner or internal support component. Perform a 90-degree rotation and secure it with screws (319503).
Step 10: Attach Shelf/Divider
Attach a shelf or internal divider panel using screws (319503).
Step 11: Attach Mounting Brackets
Attach two mounting brackets (10036383, 10039201) to the unit using screws (319503).
Step 12: Attach Rail/Support
Attach a rail or support component to the unit using 10 screws (319503).
Step 13: Install Drawer Runners
Install internal drawer runners or supports using cam locks (10046940) and dowels (10116456, 10116457).
Step 14: Wall Mounting Preparation
Attach a wall mounting rail to the unit. A warning symbol [!] indicates caution is needed. Ensure the unit is correctly aligned for wall attachment. The diagram shows a warning against improper wall mounting, suggesting the unit should not be left unsecured.
Step 15: Attach Securing Bracket
Attach a securing bracket (124526) to the unit. A warning symbol [!] indicates caution is needed.
Step 16: Attach Final Brackets
Attach two final brackets (124518, 124519) to the unit.
