ROCKPAR TRI Operating Instructions
For technical assistance, contact the help line at 1-646-758-0144, available 24 hours a day, 7 days a week. For how-to videos and other helpful information, visit the URLs or scan the QR codes on the right.
rockvillesupport.com/rockpar-tri-white | rockvillesupport.com/rockpar-tri-black
Settings
Use the MENU button to enter the settings menu. Press and hold the UP and DOWN buttons to quickly scroll through the menu items. Press ENTER to make a selection and use the UP and DOWN buttons to scroll through the options or numerical values for that setting. Press the ENTER button to save your selection. If you press the ENTER button on any setting, the saved mode/settings/values will remain in place even after powering off the unit and will be the default when you power the unit back on.
Display Mode | 1st Menu Value | 2nd Menu Value | Description |
---|---|---|---|
d.001 | d001 – d512 | Set DMX address code | |
IP.01 | IP01 – IP64 | DMX group address: IP01=d001, IP02=d008, IP03=d015 ... | |
A1.01 | A1.01 – A1.11 | Color selection: Use the up/down buttons to select color. | |
A2.01 | A2.01 – A2.32 | Color cycle change: Use the up/down buttons to adjust speed. | |
A3.01 | A3.01 – A3.11 | A3.01 – A3.32 (flashing) | Gradual change: Use the up/down buttons to select preset modes. |
After selecting mode, press ENTER to access submenu. This menu will flash on screen. Use the up/down buttons to adjust speed. | |||
A4.01 | A4.01 – A4.04 | Select sound mode sensitivity. 1 being the least sensitive, 4 being the most. | |
A5.01 | A5.01 – A5.07 | A5.01 – A5.32 (flashing) | Strobe color selection. After selecting mode, press ENTER to access submenu. This menu will flash on screen. Use the up/down buttons to adjust speed. |
r255 | r000 – r255 | Red dimmer | |
G255 | G000 – G255 | Green dimmer | |
b255 | b000 – b255 | Blue dimmer |
DMX Controls
When using a DMX controller, use the charts below to reference each channel's function.
7-Channel Mode
Channel | Function | Value | Description |
---|---|---|---|
1 | Mode | 0 – 10 | Manual dimming, Ch4 – Ch7 only. |
10 – 50 | A1: Color selection | ||
51 – 100 | A2: Color cycle change | ||
101 – 150 | A3: Gradual change | ||
151 – 200 | A4: Sound mode | ||
201 – 255 | A5: Strobe | ||
2 | Color | 0 – 255 | Changes the color for the Mode (Ch1) function being used. |
3 | Speed | 0 – 255 | Changes the speed for the Mode (Ch1) function being used. |
4 | Master dimmer | 0 – 255 | Adjust overall brightness of Ch5 - Ch7. |
5 | Red | 0 – 255 | (Ch1 must be set to Manual dimming mode to engage these channels) Adjust individual color brightness |
6 | Green | 0 – 255 | |
7 | Blue | 0 – 255 |
Remote Control Functions
The remote control allows for wireless operation of the ROCKPAR TRI. It features the following functions:
- 1. Power: Powers the LED bulbs ON or OFF.
- 2. A1: Enter Color Selection mode. Use the COLOR +/– buttons to select colors. Use the SPEED +/– buttons to adjust brightness.
- 3. A2: Enter Color Cycle mode. Use the SPEED +/– buttons to adjust speed.
- 4. A3: Enter Gradual Change mode. Use the COLOR +/– buttons to cycle through available gradual change modes. Use the SPEED +/– to adjust the speed of the selected mode.
- 5. A4: Enter Sound mode. Use the SPEED +/– buttons to adjust sensitivity.
- 6. A5: Enter Strobe mode. Use the COLOR +/– buttons to select strobe colors. Use the SPEED +/– buttons to adjust speed.
- 7. COLOR +/–: Select colors or mode functions.
- 8. SPEED +/–: Adjust speed or select mode functions.
- 9. DMX +/–: Use these buttons to adjust DMX values.
- 10. IP +/–: Use these buttons to adjust the DMX group address.
Remote Control Diagram Description: The remote control features a power button [power-symbol] (labeled 1), five mode buttons [A1-button] through [A5-button] (labeled 2-6), and four control button pairs: [COLOR +/- buttons] (labeled 7), [SPEED +/- buttons] (labeled 8), [DMX +/- buttons] (labeled 9), and [IP +/- buttons] (labeled 10). The device is marked with 'LED PAR' and 'LIGHTING REMOTE'.