ACTIVESHOP Ultrasonic Cleaner ACDS-100

Technical Specifications

Important Safety Precautions

• Disconnect the device before filling the tank. Do not exceed the "MAX" line to avoid overfilling.
• Do not fill the tank with abrasive or corrosive chemicals. This can cause leaks and further damage.
• Do not use the cleaner if the cable or plug is damaged. If damaged, contact a service center for inspection and repair.
• Store the cleaner in a safe, dry place, away from direct sunlight.
• Never leave the cleaner unattended when plugged in.
• Do not use while bathing.
• Disconnect the cleaner from the power source after use.
• Do not immerse the cleaner in water to avoid electric shock.
• Water should be poured through the designated space on the device, indicated by an arrow.

Device Construction and Accessories

The ultrasonic cleaner consists of the following parts:

• 1. Lid: The cover for the cleaning tank.
• 2. Max Liquid Level Line: An indicator inside the tank showing the maximum fill level.
• 3. Tank: The main compartment where items are placed for cleaning.
• 4. Power On/Off Switch: Button to start or stop the cleaning cycle.
• 5. Time Display: Digital screen showing the remaining cleaning time.
• 6. Time Setting Button: Button to adjust the cleaning duration.
• 7. Power Cord Socket: Port for connecting the power cable.
• 8. Basket: A removable basket to hold items during cleaning.
• 9. Watch Holder (optional): An accessory for holding watches.
• 10. Power Cord: Cable to connect the device to a power outlet.

Diagram shows an exploded view of the ultrasonic cleaner with numbered parts.

Storage and Handling

1. Do not start the cleaner without water inside. Operating the cleaner dry can damage it.
2. Do not overload the cleaner for continuous operation. After 30 minutes of continuous use, let the cleaner run empty for another 10 minutes.
3. Do not leave water in the cleaner permanently. Empty the water or solution after use. Leaving water or solution in the cleaner for extended periods can cause damage.
4. Take care of the exterior of the cleaner. Wipe off any water or solution immediately. Use a damp cloth to clean the cleaner. Wipe dry after cleaning.

Diagrams show steps for filling the device, cleaning the exterior with a damp cloth, and wiping it dry.

Operating Instructions

1. Remove the lid. Place the items in the basket and then into the cleaner's tank. For sharp objects that could damage the cleaner, ensure you use the basket. Note that the basket absorbs 30-40% of the ultrasonic energy.
2. Fill the tank with water. The water should cover the items to be cleaned but must not exceed the maximum liquid level.
3. Place the lid back on and connect the cleaner to the power source. The display will show "180", which is the default cleaning time.
4. Set the desired cleaning time using the time setting button. Possible options: 180s, 300s, 480s, 600s, 90s.
5. Turn on the cleaner using the power switch. The cleaning process will begin, and the timer will count down to 0.
6. When "000" appears on the display, the cleaner will stop automatically.
7. If you wish to end the cleaning cycle before the set time, press the power switch. If you need to repeat the cycle or increase the cleaning time, press the time setting button, select the desired time, and press the power switch to restart the machine.
8. After finishing, unplug the unit, empty the remaining water, and wipe the unit dry.
9. Store in a dry and cool place.

Diagrams illustrate the steps: connecting power, setting time, starting, timer countdown, stopping early/restarting, unplugging/emptying/wiping, and storage.

Cleaning Methods

1. Regular Cleaning: Use water according to the operating instructions. Empty the water after use.
2. Solution Cleaning: Prepare the cleaning solution according to the manufacturer's recommendations. Be careful not to exceed the solution's concentration. This can damage the cleaner's seals, potentially leading to flooding of electronic components. When finished, fill the cleaner with water, run it for 90 seconds, and then empty the residue. This prevents damage to the cleaner from prolonged contact with chemicals.

Optional Accessories Usage

• Basket: Use the basket to clean small and delicate items. When cleaning multiple items, ensure they do not touch each other.

  Diagram shows the basket accessory.

• Watch Holder: Use the holder to keep the watch above the water surface when cleaning the strap.

  Diagram shows the watch holder accessory.

Items Not Suitable for Ultrasonic Cleaning

• Fine jewelry (pearls, emeralds, ivory items, beads, shells, agate).
• Welded, coated, and glued items.
• Other items such as wood, coated glass, ceramics, camera filters.

Safety Measures

1. The device is professional equipment intended for use in beauty salons. Operation by qualified cosmetic personnel avoids undesirable consequences during treatment.
2. The device must not be disassembled, and attempts should not be made to use it for purposes other than those indicated in these instructions. All maintenance and repairs must be performed only by an authorized service technician (ACTIVESHOP Sp. z o.o.).
3. Do not install or use the device near liquids, in damp places, or with wet hands, to prevent liquids from entering the device.
4. Immediately disconnect the device from the power outlet and contact authorized service provided by ACTIVESHOP Ltd. in the following cases:
   • (a) liquid has entered the device,
   • (b) the device emits a strange odor, smoke, or makes strange noises,
   • (c) the power cord is damaged,
   • (d) the device has been overturned or its casing is damaged.
5. Do not place any objects on the cables. Do not install the device where someone might step on the power cord.
6. For safety reasons, unplug the power cord each time you finish working with the unit.
7. Do not insert anything into the device's opening. If a foreign object enters the opening, unplug the cord and contact the distributor or manufacturer.
8. Do not place the device on an unstable cart, shelf, or vehicle. The device may be damaged if it falls.
9. To ensure the device's fixed lifespan, it is recommended to allow a one-minute interval before pressing the power button again (between turning on and off, and vice versa).
10. The power supply must comply with the specifications on the nameplate. Otherwise, there is a risk of the device malfunctioning, being damaged, or even burning out.

Warnings

1. In case of damage to the power cord or other malfunctions, contact an authorized service center to avoid hazards.
2. This device can be used by children aged 8 and above, and by persons with reduced physical and mental capabilities and lack of experience and knowledge, provided they are supervised or instructed on safe use, so that associated risks are understood.
3. The device is not intended for use by children. Do not allow children to play with the device.
4. Do not leave the device unattended when children or persons unfamiliar with its use are nearby.
5. This electric device is not a toy. Incorrect use or contact with the electric device can pose a risk to health or lead to death; therefore, the device must be used and stored away from children's reach.

Appliance Disposal

Dispose of used electrical appliances, accessories, and packaging at recycling centers in accordance with environmental protection principles. Electrical appliances must not be disposed of in household waste containers. Follow the disposal rules for this type of equipment. To protect the environment in accordance with Directive 2012/19/CE on waste electrical and electronic equipment, used electrical equipment must be collected separately and then handed over to collection points for used equipment. Old appliances contain fully recyclable components and should therefore be handed over for recycling. They must be handed over to the appropriate collection points, as well as to ACTIVESHOP Ltd.

Diagram shows a recycling symbol indicating proper disposal of electronic waste.

Storage and Transport

The device must be transported at temperatures between (-) 20 °C and (+) 50 °C only in its original packaging. Store the device in a well-ventilated area with a relative humidity of no more than 75%. Operating temperature is between (+) 10 °C and (+) 40 °C. During storage and transport, the device must not be dropped, exposed to mechanical shocks, or atmospheric agents.