Welcome
Dear Customer: Thank you for choosing 4modernhome! We appreciate your business. Should you have any questions or encounter any issues, please don't hesitate to contact us. You can reach us via email at support@4modernhome.com or by calling 469-312-6428. Our team is dedicated to ensuring your complete satisfaction with your purchase. We value your feedback, as it helps future customers in making informed decisions. We encourage you to share your experience by leaving a brief product review on the platform where you made the purchase. Once again, thank you for choosing 4modernhome! Best regards, [4Modernhome/Support Team]
Important Safety Information
General Warnings
If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
California Proposition 65 Warning
This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Installation Caution
It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass component(s) and/or lamp(s).
Technical Specifications
Applicable bulb type: A19, A60, T45, ST58... (Excluding bulb)
Parts Included
| Code | Part Description | QTY |
|---|---|---|
| A | Butterfly nut | 1 |
| B | Lamp Base | 1 |
| C&D | Tube | 1 |
| E | Tube | 1 |
| F&I | Bend Tube | 1 |
| G&J | Small part | 1 |
| H&K | Screw part | 1 |
| L | Socket | 1 |
| M | Shade | 1 |
| N | Socket ring | 1 |
Assembly Instructions
Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.
- Unpack all parts from cartons carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Tighten the tube(C) into the base (B) until tight.
- Tighten the tube(D) into the tube(C) until tight.
- Tighten the tube(E) into the tube(D) until tight.
- Tighten the bend tube(F) into the tube(E) until tight. Insert the small part(G) into the end of bend tube(F), put screw part(H) in and screw with the bend tube(F) together.
- Insert the small part(J) into the end of bend tube(I), put screw part(K) in and screw with the bend tube(I) together.
- Place the shade(M) into the lamp socket(L) and tighten by socket ring(N).
- Adjust the lamp socket(L)/shade(M) to one side of base centerline and lock base with butterfly nut(A).
Diagram Description: The diagram shows a lamp structure consisting of a base, multiple connected tubes forming an arc, a socket at the top holding a shade, and various connection points indicated by parts like butterfly nuts and screws.
