LÅNGDANS Roller Blind

by IKEA

Important Information Regarding Wall Fixings

As wall materials vary, screws for fixing to the wall are not included. For advice on suitable screw systems for your specific wall type, it is recommended to consult your local specialised dealer or hardware store.

Product Components

The IKEA LÅNGDANS roller blind kit includes the following main components:

Mounting brackets (2 types, 1x each)
Pull cord assembly with handle (1x)
Bottom bar (1x)

Note: Wall mounting screws and appropriate wall plugs are not included and must be purchased separately based on your wall material.

Tools Required for Installation

The following tools may be needed for installation:

Screwdriver ?
Spirit level ⚖️
Scissors ✂️
Pencil ✏️
Measuring tape ?
Hacksaw ? (potentially for adjusting the blind width)

Assembly and Installation Steps

Step 1: Prepare Mounting Positions

Measure and mark the desired positions for the mounting brackets on the wall or window frame. Ensure a minimum clearance of 5 cm (1 15/16 inches) from the wall edge and a minimum of 5 mm (3/16 inches) from the ceiling.

Step 2: Attach Mounting Brackets to Wall

Securely attach the mounting brackets to the wall at the marked positions using appropriate screws and wall plugs (not included). Ensure the brackets are level using a spirit level. The diagrams show two different types of brackets, suggesting varied mounting options.

Step 3: Prepare Roller Blind Fabric

If necessary, the roller blind fabric may need to be trimmed to size. Diagrams indicate using scissors ✂️ and a hacksaw ?, with measurements such as 35 mm (1 3/8 inches) and Zmm (Z") possibly relating to trimming or specific installation clearances.

Step 4: Insert Bottom Bar

Insert the bottom bar into the hem of the roller blind fabric. Specific dimensions for different blind widths (e.g., 600 mm, 800-1400 mm) and clearance (Z= Max 150 mm) are indicated.

Step 5: Attach End Caps

Attach the end caps to the roller tube. These caps house the mechanism for connecting to the brackets and may include a pull cord attachment point.

Step 6: Connect Pull Cord Assembly

Attach the pull cord assembly and handle to the designated point on the roller blind, usually on one of the end caps or the bottom bar.

Step 7: Mount Roller Blind to Brackets

Align the roller blind assembly with the mounted brackets on the wall. The roller tube ends are designed to fit into the brackets.

Step 8: Secure Roller Blind Assembly

Engage the roller blind assembly with the wall brackets. This often involves a click mechanism or a screw to secure it firmly in place. The diagrams show a 'Click!' confirmation.

Step 9: Operate and Adjust Blind

Test the operation of the roller blind by pulling the cord. Ensure it rolls up and down smoothly. Adjustments may be needed for proper function.

Step 10: Dispose of Packaging

Dispose of packaging materials responsibly, preferably through recycling. ♻️

	LÅNGDANS Roller Blind: IKEA Assembly and Installation Guide Learn how to assemble and install the IKEA LÅNGDANS roller blind. This guide provides step-by-step instructions, tool requirements, and important notes on wall mounting.
	FRIDANS Blackout Roller Blind Assembly Instructions \| IKEA Step-by-step guide for assembling and installing the IKEA FRIDANS blackout roller blind. Includes safety warnings, parts identification, and instructions for mounting and cutting the blind.
	FYRTUR Roller Blind Installation and Safety Guide Comprehensive instructions for installing and safely operating the IKEA FYRTUR smart roller blind, including battery handling and wall mounting advice.
	SANDVEDEL Roller Blind Installation Guide \| IKEA Detailed installation guide for the IKEA SANDVEDEL roller blind. Learn how to mount the blind, cut it to size if necessary, and ensure proper operation. Includes essential notes on wall material compatibility and required tools.
	SKOGSKLÖVER Roller Blind Assembly and Installation Guide This guide provides instructions for assembling and installing the SKOGSKLÖVER roller blind from IKEA. It includes multilingual instructions and diagrams for proper mounting.
	TRETUR Roller Blind Installation Guide This guide provides step-by-step instructions for installing the IKEA TRETUR roller blind. It includes details on mounting brackets, attaching the blind, and operating the mechanism.
	IKEA LÅNGDANS Roller Blind Assembly Instructions Step-by-step guide for assembling and installing the IKEA LÅNGDANS roller blind. Includes multilingual instructions and safety information.
	FÖNSTERBLAD Roller Blind Assembly Instructions Comprehensive guide to assembling and installing the IKEA FÖNSTERBLAD block-out roller blind. Includes important safety and installation notes, and product details.