LÅNGDANS Roller Blind
IKEA
Important Information
As wall materials vary, screws for fixing to the wall are not included. For advice on suitable screw systems, contact your local specialized dealer.
Tools Required
- Screwdriver
- Spirit level
- Scissors
- Pencil
- Tape measure
- Hacksaw
If you encounter difficulties, contact IKEA for assistance.
Parts Included
- 2x Roller blind brackets
- 1x Pull cord assembly
- 1x Roller blind with fabric
Assembly Instructions
Step 1: Mounting Preparation
Determine the mounting location (wall or ceiling) and ensure adequate clearance (min. 5 cm / 1 15/16") for the brackets.
Step 2: Mark Bracket Positions
Measure the desired width for the blind. Mark the positions for the mounting brackets on the wall or ceiling, ensuring they are level. The diagrams indicate marking points.
Step 3: Attach Brackets
⚠️ Securely attach the mounting brackets to the wall or ceiling using appropriate fasteners for your wall material. The diagrams show screws being inserted into the brackets and then into the wall.
Step 4: Prepare Roller Blind
Attach the provided strip to the roller blind tube. If necessary, measure and cut excess fabric to achieve the desired length. Insert the bottom rod into the fabric sleeve after cutting.
Step 5: Mount Roller Blind
Lift the roller blind and align the tube with the mounted brackets. Slide the blind into the brackets. The diagrams show the blind being inserted and then locked into place with a 'Click!' sound.
Step 6: Attach Pull Cord
Attach the pull cord assembly to the bottom bar of the roller blind.
Step 7: Final Adjustments & Disposal
Ensure the blind is securely installed and operates correctly. Dispose of packaging materials responsibly, indicated by a recycling symbol ♻️.
