Tactacam Reveal Cellular Camera Instruction Manual
Brand: Tactacam
Product Type: Cellular Trail Camera
Website: revealcellcam.com
Reveal App Download
This section guides users on downloading and setting up the Tactacam Reveal mobile application. The app is essential for managing the cellular trail camera.
App Availability: The Tactacam Reveal App is available for free download on both the Google Play Store and the Apple App Store.
To download:
- Search for "TACTACAM REVEAL" in your device's app store.
- Download and install the application.
The app interface allows users to view photos, manage camera settings, and monitor battery and signal status.
[Illustration: Mobile phone screen showing the Tactacam Reveal app interface with options for viewing photos, managing settings, and checking camera status.]
Reveal Introduction
This section provides an overview of the Tactacam Reveal cellular camera, detailing its various components.
Front View
The front of the camera features several key components:
- 1. Antenna: For cellular signal reception.
- 2. 30 IR LEDs: Infrared LEDs for night-time illumination.
- 3. Lens: The primary camera lens for capturing images.
- 4. Light Indicator / Light Sensor: Indicates camera status (day/night mode).
- 5. PIR Sensor: Passive Infrared sensor to detect motion.
[Illustration: Front view of the Tactacam Reveal camera with labels pointing to the Antenna, IR LEDs, Lens, Light Indicator/Sensor, and PIR Sensor.]
Bottom View of Camera
The bottom of the camera includes connection ports:
- 1. Tripod attachment: A threaded mount for attaching to tripods or other mounting systems.
- 2. External battery in: Port for connecting an external battery pack.
- 3. USB Port: For data transfer or charging.
[Illustration: Bottom view of the Tactacam Reveal camera showing the Tripod attachment, External battery connection, and USB Port.]
Internal, Side View of Camera
When opened, the camera reveals its internal components:
- 1. SIM Slot: Location for the SIM card (golden part faces the front housing side).
- 2. LCD Screen: The display screen for settings and status.
- 3. Menu button: Used to navigate through menus.
- 4. SD card slot: For storing captured images and videos.
- 5. Power switch: Controls the camera's power (Off, Setup Test Mode, On).
- 6. Navigation buttons / OK button: Used for selecting options and confirming actions.
- 7. Battery slot: Compartment for AA batteries.
[Illustration: Side view of the opened Tactacam Reveal camera, showing the SIM Slot, LCD Screen, Menu button, SD card slot, Power switch, Navigation buttons, and Battery slot.]
Quick Start Guide
Follow these steps to get your Tactacam Reveal camera operational.
What is in the Box
Your Tactacam Reveal package should contain:
- Trail camera x 1
- Instruction manual x 1
- Mounting strap x 1
- USB cable x 1
Get Camera and App Ready
- Search for "TACTACAM REVEAL" in the App Store or Google Play, download, and install the app on your smart device.
- Create an account using a valid email address. Activate your account by clicking the confirmation link in the received email, then log in.
- Install the camera's antenna, a Class 10 SD card (up to 32GB), and 12 AA batteries.
Add Camera to the App Account
- Open the Tactacam Reveal app. Navigate to the 'Camera' section and click the (+) button.
- Select a Data Plan and add your first camera. Follow the prompts to choose a plan and enter your payment information.
[Illustration: App screens showing the process of adding a camera and selecting a data plan, including options for monthly and yearly subscriptions.]
Registering the Camera
- Turn the camera to "Set up" mode. Navigate to "4G >>> QR Code" to display the camera's unique QR code on its LCD screen.
- Open your Tactacam Reveal app and use the "Scan QR code" function to scan the code displayed on the camera's LCD.
- Enter the camera's name and location in the app. The camera will then be added to your account.
- Press the menu button three times to return to the main screen. Camera activation may take 3 to 5 minutes.
[Illustration: Camera LCD displaying a QR code. App screen showing the QR code scanning interface.]
Start Using
- Turn the camera OFF, then select "SET UP". Wait for the camera to connect to a 4G signal, which will be indicated on the camera screen.
- Press "OK" on the camera to take a manual photo. This photo will be sent to your app.
- Turn the camera to "ON". The camera indicator light will flash 5 times, and the camera will then enter auto-detecting mode.
[Illustration: Camera screen showing signal strength (4G, battery, memory) and photo count, alongside an image of a deer.]
Camera Settings
Customize your Tactacam Reveal camera's performance with various settings.
Cam Settings
| Setting | Programmable Options |
|---|---|
| Cam ID | ON/OFF. Select "ON", press "OK" to set 4 digits/alphabets for each camera. This helps identify photos and cameras. |
| Cam Mode | Photo: Captures photos based on configured Multi-shot & Image Size. Full resolution images are stored locally; thumbnail photos are sent to the app. |
| Flash Power | High / Low. High: All IR LEDs active for dark environments. Low: Half IR LEDs turned off. |
| Image Size | 8MP (3264x2448), 12MP (4032x3024), 24MP (5632x4224). |
| Night Mode | 1) Min. Blur: Short exposure for motion blur reduction. 2) Max. Range: Longer exposure for extended IR flash range (lower image quality). 3) Balanced: Combination of Min. Blur and Max. Range. |
| Multi-shot | Programmable 1 to 5 photos per trigger. The second image of the sequence is transmitted, and the rest are saved to the SD card. |
PIR Settings
| Setting | Programmable Options |
|---|---|
| Sensitivity | High, Middle, Low, OFF. Higher sensitivity detects smaller subjects, has longer detection distance, and is easier for the sensor to differentiate body heat from ambient temperature. Setting to High is recommended for high-temperature environments. Setting to OFF stops the camera from taking pictures upon trigger. |
| Delay | ON/OFF. Sets a time interval between photos upon motion detection to avoid excessive photos. Example: 1-minute interval between photos if set to 00:01:00. Configurable delay time: 00:00:05 to 23:59:59. Note: Time Lapse and Delay cannot be set simultaneously. |
| Time Lapse | ON/OFF. Sets an interval for automatic photo capture, turning off the PIR sensor. Configurable interval: 00:00:05 to 23:59:59. Note: Time Lapse and Delay cannot be set simultaneously. |
| Working Timer | ON/OFF. Sets the start and end time (hour/minute) for the camera to operate. Example: Camera works only between 15:00 and 18:00. |
4G Settings
| Setting | Programmable Options |
|---|---|
| QR Code | Used in the app to register the camera into your account. |
| Max Num/Day | Default: unlimited. Optional: 1 to 99. Limits the number of photos transmitted per day. For example, if set to 50, only 50 photos will be transmitted daily; others are stored on the SD card. |
Other Settings
| Setting | Programmable Options |
|---|---|
| Language | English... |
| Date/Time | Month : date : year; hour : minute : second. Adjust to ensure all functions work correctly. |
| Stamp | Imprints programmed camera ID, moon phase, temperature, date, and time on photos. |
| Battery Type | Alkaline / NI-MH / Lithium. Choose for best battery performance. |
| SD Loop | ON/OFF. When ON, the camera continues to record photos by deleting the earliest photo when the SD card is full. |
| Password | ON/OFF. Enables password protection for the camera, supporting up to 6 alphanumeric characters. |
| Reset | Select "Yes" to reset the camera to factory default settings. |
| About | Displays firmware version (Version: / IMEI: / MCU: / ICCID:). |
Specification
Technical specifications for the Tactacam Reveal camera.
| Feature | Specification |
|---|---|
| Camera Mode | Photo |
| Picture size | 8MP/12MP/24MP = 3264x2448/4032x3024/5632x4224 |
| Picture Format | JPEG |
| Day/Night Mode | Yes |
| IR range | 96+ feet |
| IR LED | 30 pcs IR LEDs |
| Memory | SD Card Class 10 (4GB – 32GB) |
| Operating keys | 7 |
| Lens | F=6mm; F/No=2.0; FOV=60° Auto IR-Cut-Remove (at night) |
| LCD Screen | 2.4" TFT, RGB, 262k |
| PIR distance | 96+ feet |
| PIR Angle | 52° |
| Multi-shot | 1P-5P |
| Trigger Time | 0.5s |
| Device Serial No. | Yes |
| Time Lapse | Yes |
| SD Loop | ON/OFF |
| Operation Power | Battery: 9V; DC: 12V |
| Battery Type | 12AA |
| External DC | 12V |
| 4G communication | LTE wireless |
| Stand-by Time | 5~8 months (6×AA~12×AA) |
| Auto Power Off | In Test mode, camera will automatically power off in 3 mins if there is no keypad touching. |
| Interface | USB/SD Card/DC Port |
| Mounting | Strap; Tripod |
| Operating Temperature | -13°F to 140°F |
| Storage temperature | -22°F to 158°F |
Troubleshooting
Solutions for common issues encountered with the Tactacam Reveal camera.
Photos Do Not Capture Subject of Interest
- Check the "Sensor Level" (PIR sensitivity) setting. For warm conditions, set to "High"; for cold weather, set to "Low".
- Position the camera away from heat sources in its line of sight.
- Avoid placing the camera near water or moving objects that might trigger it without a subject. Aim over clear ground instead.
- Do not mount the camera on small trees prone to strong winds.
- Remove any branches or foliage obstructing the camera's lens.
Camera Stops Taking Images or Won't Take Images
- Ensure the SD card is not full. If it is, the camera will stop capturing images. Enable "Cycle Recording" to prevent this.
- Verify that alkaline or NiMH AA batteries have sufficient power.
- Confirm the camera's power switch is in the "On" position, not "Off" or "Test" mode.
- Format the SD card using the camera before initial use or when the camera stops taking images.
Night Vision Flash Range Doesn't Meet Expectation
- Ensure batteries are fully charged.
- Use the "Max Range" setting for better IR flash range. Adjust Night Mode to Max Range for optimal night vision.
- High-quality 1.2V NiMH rechargeable AA batteries provide improved IR flash range compared to alkaline batteries, which may lack sufficient amperage.
- Surroundings like trees, walls, or ground can help reflect IR light for better night images. Avoid aiming the camera into an open field with nothing to reflect the flash.
Warranty and FCC Regulations
This section covers warranty information and FCC compliance statements.
FCC Regulations
FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Support and Contact Information
DO NOT RETURN PRODUCT TO YOUR RETAILER
PLEASE CALL: 844-482-2822
OR EMAIL: SUPPORT@REVEALCELLCAM.COM
For any warranty issues or help filming your hunts with TACTACAM!
