Tactacam Reveal Pro 3.0 Instruction Manual

Get to Know Your Camera

Camera Anatomy

1. Lens

2. Camera Working Status Indicator

3. Microphone

4. Display Screen

5. PIR Motion Sensor

6. IR LEDs

7. Navigation Arrows

8. SD Card Slot

9. Power/Enter

10. Battery Eject Button

11. External Battery In/DC Port

12. USB Port

13. Camera Stake/Mount Attachment

14. Cable Lock Holes

15. 1/4-20 Accessory

16. Strap Holes

17. Reset Button

Recommended Camera Accessories (Not Included)

• SD Card (32GB recommended)
• Solar Panel
• Lockable Security Box
• T-Post Mount
• Lithium Cartridge
• Adjustable Camera Stake

View and purchase all accessories at tactacam.com.

Quick Start Guide

Setting Up the Camera

1. Install a Class 10 U3 SD card (16GB or 32GB) (optional). Recommended brands: SanDisk, Lexar, Tactacam.
2. Install 12 AA batteries or REVEAL Lithium Cartridge.
• To eject the battery tray, press the EJECT button. Orient AA batteries correctly (+ and -).
• See page 9 for battery details.

SIM Card

• SIM is pre-installed. The camera automatically scans for the best cellular network.

SD Card

• SD card is optional.
• If present, the camera writes to the SD card first.
• SD loop overwrites older images if the card is full.

Setting Up Your Account

For new users, visit the REVEAL Web Portal at account.revealcellcam.com to set up your account. You can also access the portal via the app.

Existing users with active cameras can log in to the app and add the new camera.

Download the REVEAL App

Download the Tactacam REVEAL app from the Apple App Store or Google Play Store. Sign in using the same email and password created on the website.

[App Store] [Google Play]

Add Camera to the App

1. Navigate to the REVEAL app and log in. Click the home icon.
2. Click the menu in the upper left corner.
3. Select "+ Add a Camera".
4. Choose your plan and camera model.
5. Follow prompts, allow phone camera access, and scan the QR code on the camera.
6. Name your camera and assign a location.

On-Screen Settings

The Pro 3.0 allows full control of camera settings via the screen using the keypad (left, right, up, down, enter). For best results, it is recommended to leave settings in factory mode.

Connecting to WiFi

1. Turn on the REVEAL LCD screen using the "Power" button.
2. When the Wi-Fi icon flashes, it's ready to pair with your phone or tablet.
3. In the app, go to the Account page and click "Connect to REVEAL Wi-Fi".
4. Follow in-app instructions or manually connect via your phone's Wi-Fi settings (SSID: REVEAL, Password: Reveal2021 - case sensitive).
5. Preview on screen: Red line indicates the point of focus. Press "Power" to send a test picture.

Remotely Change Camera Settings from the App

From the camera page, click the camera name, then select "Camera Settings". Ensure "Apply Settings" is selected to save changes.

Note: In "Settings Check", Daily mode checks settings every 24 hours. Hybrid mode keeps the camera awake for 5 minutes after each picture to receive SMS commands. Instant mode receives settings instantly but uses more battery.

Sending a Test Picture

1. Allow the camera to connect to 4G. Signal strength is displayed on the screen.
2. After activation, the signal status indicator will search and then connect, showing signal strength.
3. After connecting, press the power/enter button to send a photograph. A success message will appear on the REVEAL screen.
4. If the picture fails to send, a failure message will display.
5. Ensure a motion-detected picture is sent to your phone via the app (may take a few minutes).

Leaving Your Camera in the Field

1. Using the display screen or Wi-Fi stream, position the camera for your desired focal point.
2. Wipe down the seal to remove dirt and debris.
3. Press the left navigation arrow to enter work mode, or allow the camera to enter work mode automatically. The camera will then send photos.
4. Ensure motion-detected pictures are sent to your phone via the app (may take a few minutes).

Settings / Specifications

Best Practices

Proper Camera Placement

1. Location and placement are critical for optimal performance.
2. Avoid hanging the camera on small, moving trees.
3. Place the camera at waist height on a tree or post.
4. Point the camera down about 7 to 15 degrees, or use the REVEAL Tree Mount.
5. For best lighting, face the camera North, away from the sun.
6. If placed too high and angled down, the field of view narrows. This is useful for bait stations or scrapes.
7. On a food plot: Camera height and angle are critical for the widest field of view. Do not place too high.
8. On a trail: For the best view, angle the camera up or down the trail, rather than perpendicular to it.

Batteries and Cellular Trail Camera Performance

1. Use recommended batteries: Energizer® lithium, Duracell® Max alkaline, Rayovac® UltraPro alkaline.
• Do not mix old and new batteries.
• Do not mix battery types (alkaline, lithium, standard, rechargeable).
• Ensure correct polarity (+ and -).
• Remove batteries if the product will be unused for a long time.
2. In cold weather, use lithium ion batteries for optimal speed and performance.
3. If using the External Solar Panel (sold separately), AA batteries act as a backup. When paired with a REVEAL Lithium Cartridge, the Solar Panel V2 charges the Lithium Cartridge V2.

Troubleshooting

Camera Sends Pictures of Nothing

Motion sensors (PIR sensors) detect heat and motion. False triggers can occur due to heat, wind, vegetation, or precipitation.

1. Clear the camera's field of view (5-10 yards in front) of low-hanging branches, brush, and weeds.
2. Motion sensitivity: Start with High sensitivity. Decrease if receiving too many false triggers (9 is highest, 1 is lowest).

Night Vision Flash Range Doesn't Meet Expectation

1. Ensure batteries are fully charged.
2. Select "Max Range" for better IR flash range. Adjust Night Mode to Max Range.
3. High-quality 1.2V NiMH rechargeable AA batteries can improve IR flash range.
4. Note: For cold weather use, lithium batteries are recommended for consistent results.
5. Surroundings (trees, walls, ground) within flash range can improve night images. Avoid aiming the camera in an open field with nothing to reflect the IR flash.

To Help Prevent Theft or Damage

Use a protective security box, available at tactacam.com.

Camera Stops Taking Images or Won't Take Images

1. Ensure the SD card is not full. Turn on SD Loop to overwrite older images.
2. Ensure alkaline or NiMH-AA batteries have sufficient power.
3. Format the SD card before use or when the camera stops taking images.

Internal Condensation on Lens

The REVEAL is IP66 rated waterproof. Condensation may occur if the antenna is not screwed in properly, or if the seal has dirt or debris.

• Pull the SD card and let the camera sit open in an area with circulating air for 3-4 days.
• Alternatively, place the camera in a sealed container with rice for 24 hours to absorb moisture.
• Clean the seal and tighten the antenna.
• Place the camera back in the field.

If the Camera Has Accidentally Been Submerged in Water

1. Do not open the camera immediately.
2. Dry the exterior housing, preventing water from entering the interior and causing damage.

Limited Warranty

How Long Does This Coverage Last?

One year from the date of purchase.

What Is Covered?

1. Manufacturer defects in materials and workmanship, including:
• Defective buttons
• Cracked/chipped glass lens
• Broken SD card spring mechanism
• Broken USB port
2. Covered cameras will be repaired by a certified technician or replaced.

What Is Not Covered?

1. Damage caused by owner modification, attempted repairs, or alterations.
2. Damage caused by people or animals, including damage to the antenna, strap, Fresnel lens, glass lens, or camera housing.
3. If damage is caused by the owner or an animal, contact customer support for repair options to retain warranty coverage.

FCC Regulations

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Contact Information

Do not return this product to your retailer.

For warranty issues or customer support:

Call: 218-282-5650

Email: support@tactacam.com

Address: 1668 Jordan West Rd, Decorah, IA 52101

Website: www.tactacam.com