YEELIGHT Magi Light Panel Extension Pack

Product Description

This section describes the YEELIGHT Magi Light Panel Extension Pack. The system consists of light panels and connectors.

Diagram Description: The diagram shows triangular light panels. Connectors are used to link these panels together. A separate connector is depicted, showing "Pre" (previous panel) and "Next" (next panel) markings to indicate the order of connection between panels.

Connection Method

1. Light panels can be combined using connectors for power supply and information transmission.
2. Note the "Pre" (previous panel) and "Next" (next panel) marks on the connectors. A maximum of 12 panels can be connected together.
3. Connect the panels to the controller, and then connect the adapter to the power supply to control the light panels. The panels cannot be used alone.

Specifications

Warnings

1. Make sure the wall or other mounting surface is clean and free of dust or water.
2. When mounting the light panels to the wall, press firmly for 30 seconds after sticking to ensure firmness.
3. Do not use double-sided tape to fix the panels on roughcast walls, wall coverings, wallpapers, brick walls, walls with peeling paint, or uneven walls.
4. Do not use double-sided tape in a humid environment (e.g., in a bathroom or toilet with tiled walls).
5. Do not mount the product on the ceiling without a reinforcement kit to prevent it from falling. Do not use double-sided tape for ceiling mounting.
6. Do not place metals or conductors near bare parts such as controller connectors, power connectors, or slots on the back of the light panels.
7. The product is not waterproof; do not wash it or expose it to wet conditions.
8. Do not leave the power cable on the floor to prevent tripping hazards.
9. Children are not allowed to use this product without adult supervision.

EU Declaration of Conformity

Quingdao Yeelink Information Technology Co. declares that the Y00409 type devices comply with EU Directives. The full text of the EU Declaration of Conformity is available at: https://edshop.edsystem.cz/prohlaseni-o-shode/article-28393

WEEE (Waste Electrical and Electronic Equipment)

This product must not be disposed of as normal household waste. It should be returned to the place of purchase or handed over to a public collection point for recyclable waste. Proper disposal helps prevent negative consequences for the environment and human health. Contact your local authority or nearest collection point for details. Improper disposal may result in fines.

Symbols: CE Mark [CE], WEEE symbol [crossed-out bin]