Lian Li UNI FAN SL-INF RGB Installation Guide
Package Contents
The package includes:
- 4 pcs of fans
- 1 pc of power module
- 1 pc of fan
Power Module Installation
Note: The socket for the power module comes in different sizes. Please be aware of the direction when installing.
Chinese Note: 注意!電源片分為大小兩種卡榫,安裝時須注意方向性。
Diagram showing power module installation with numbered steps.
Diagram illustrating how to fix and release the fan connection.
Remove the Fan Interlocking Key
The fan interlocking key is removable if it is affected by the radiator inlet and outlet.
Chinese Note: 注意!若遇到水冷排出水位置影響風扇扣鎖,可將風扇卡扣鎖移除。
Diagram showing the steps to remove the fan interlocking key.
Fan to Fan Connection
Diagram illustrating how to connect fans to each other, showing 'Fixed' and 'Release' mechanisms.
Steps to Switch Orientation of the Cable on the Power Module
Diagram showing the steps to remove and re-attach the top cover of the power module to change cable orientation.
Note: The top cover is removable if it is affected by the radiator inlet and outlet, and to route the cable vertically.
Chinese Note: 注意!若遇到水冷排出水位置影響電源片上蓋,可將上蓋移除,以垂直方式走線。
Power Module to Motherboard Connection
Connect the power module to the motherboard:
- Connect to PWM fan header.
- Connect to 5V ARGB 3-pin header.
Warning: Do not connect the wrong type of LED connector. If it is connected to the 12 V connector, permanent damage will occur.
Chinese Warning: 警告! 請不要連接錯誤類型的LED接頭,如果連接到12V接口,將造成永久損壞。