Pulsar 510 DL Auto-Draw Variable Voltage Vape Pen Manual

Visual Description: The left side of the original document features the "PULSAR" logo, the prominent text "510 DL", and the phrase "DISCREET CARTRIDGE VAPE" within a stylized droplet shape, accompanied by vertical lines. The Pulsar Vaporizers branding and contact information are at the bottom left.

Specifications

Size: 4.6 x 0.8 x 0.8 inches (116 x 20 x 20mm)
Maximum Cartridge Size: 0.4 inches (11.5mm) diameter, 2.3 inches (59mm) length
Battery Capacity: 320mAh
Voltage Settings: 3.0V / 3.8V (1.8V Pre-Heat)
Charging: USB-C
Resistance Range: 1.0-2.0 Ω

Operation

Power On/Off

Quickly pull air from the mouthpiece 5 times to switch the power on or off. The light will flash once.

Pre-Heating

Quickly (within 1.5 seconds) pull from the mouthpiece 2 times to activate the pre-heat function.

Change Voltage Setting

Quickly (within 1.5 seconds) pull from the mouthpiece 3 times to change the setting:

Green Light: 3.0V
Red Light: 3.8V

Charging

Red light: Charging
Green light: Fully charged

Low Battery Indicator

The red light will flash 10 times to alert the user to low battery. The device will then enter standby mode. Charge before continuing use.

Protection Features

Battery/Cartridge Protection: After 10 continuous seconds of use, the red light will flash 4 times, and the automatic vape time cutoff will activate, turning off the heat.
Over-voltage/Short-circuit Protection: The red light will flash 3 times, and the device will fully turn off.

Kit Includes

1 x Pulsar 510 DL Battery
1 x Bottom Magnetic Connector
1 x USB-C Charging Cable

Quick Start Instructions

Connect the device to a power source and charge until the light turns green.
Insert the 510-threaded cartridge of your choice.
Quickly pull 5 times to power on the device.
Quickly pull 3 times to change voltage to your preferred setting.
Quickly pull twice to start pre-heating.
Pull from the mouthpiece and enjoy.

How to Use Instructions

Ensure the bottom magnetic connector is properly connected to the bottom of the unit. The battery will not charge if the connector is not attached.
Attach the battery to the provided USB-C cable and connect to a power source. The light will flash once when the battery is connected.
Allow the battery to fully charge before first use. The light will turn green. Disconnect the device from the power source before use.
Remove the bottom magnetic connector and firmly screw in the 510 threaded cartridge of your choice.
Insert the cartridge into the device and ensure the bottom magnetic connector is properly connected.
If the unit is powered off, place your lips on the mouthpiece and give it 5 quick pulls to power on.
Adjust the voltage by giving the unit 3 quick pulls (Green light - 3.0V / Red light - 3.8V).
Activate the pre-heat function to prime the cartridge by giving the unit 2 quick pulls. This will activate the unit at 1.8V for 15 seconds. After 15 seconds, the unit will switch to your previously selected voltage.
Simply pull from the mouthpiece to activate the cartridge vapor and enjoy your session.

Cleaning Instructions

Remove the bottom magnetic connector from the battery portion.
Wipe the outside and inside of the bottom magnetic connector with an isopropyl alcohol pad. Use an alcohol swab to wipe any excess oil out of the 510 screw-in connector.
To clean the inside air pathway, use an alcohol-soaked swab. Using a circular motion, work your way up and down the air pathway until no more oil is visible on the swab.
Do not submerge any part of the device in cleaning solution. Allow all parts to air dry prior to resuming use.

Note: The mouthpiece is NOT removable. Attempting to remove it could impair or permanently disable the breath control functionality.

Important Safety Warnings

⚠️ Please read the following warnings carefully:

Do not expose to extreme temperatures or direct sunlight.
Do not drop the device or accessories. Do not drop or submerge in any liquid.
Do not modify the electronics in any way.
This device is intended for adults only. Do not sell or provide to minors. Keep all parts, concentrates, herbs, and liquids away from children and pets.
This is not a medical device and is not intended to diagnose, treat, mitigate, cure, or prevent any ailment, disease, or other conditions. Consult a physician before use, especially if you suffer from heart disease or any other medical condition, or if you are pregnant or breastfeeding.
Failure to follow any of these instructions could result in product damage, property damage, personal injury, and may void warranty.

Visual Description: A small diagram of the Pulsar 510 DL vape pen is shown at the bottom right of the original document.

Document Identifier: PU-0473-22

	Pulsar 510 DL Lite Auto-Draw Vape Pen User Manual User manual for the Pulsar 510 DL Lite Auto-Draw Vape Pen, detailing specifications, how to use, cleaning instructions, and important safety warnings.
	Pulsar 510 DL Centro Instruction Manual & User Guide Detailed instructions and specifications for the Pulsar 510 DL Centro variable voltage vape pen. Learn about operation, charging, cleaning, and safety warnings.
	Pulsar 510 DL 2.0 Auto-Draw Variable Voltage Vape Pen Manual User manual for the Pulsar 510 DL 2.0 Auto-Draw Variable Voltage Vape Pen, including specifications, quick start instructions, operating instructions, and cleaning guidelines.
	Pulsar 510 DL 3.0 Twist Variable Voltage Vape Pen User Manual User manual for the Pulsar 510 DL 3.0 Twist Variable Voltage Vape Pen, detailing specifications, quick start guide, instructions, cleaning, and safety warnings.
	Pulsar 510 DL 2.0 PRO Auto-Draw Variable Voltage Vape Bar Manual Official user manual for the Pulsar 510 DL 2.0 PRO Auto-Draw Variable Voltage Vape Bar. This guide provides detailed specifications, quick start instructions, operating procedures, cleaning advice, and essential safety warnings for the 1000mAh USB-C rechargeable device.
	Pulsar Duplo Cart H2O Thick Oil Vape Manual and Specifications A comprehensive guide to the Pulsar Duplo Cart H2O, a dual cartridge thick oil vaporizer featuring 4-setting variable voltage, auto-draw, and a removable mouthpiece. Includes charging instructions, operation guide, cleaning tips, and technical specifications.
	Pulsar 510 DL 5.0 Cartridge Vape Instruction Manual Comprehensive instruction manual for the Pulsar 510 DL 5.0 cartridge vape, covering specifications, kit contents, power on/off, cartridge insertion, pre-heating, voltage settings, charging, and cleaning instructions.
	Pulsar 510 DL 5.0 Cartridge Vape Instruction Manual Instruction manual for the Pulsar 510 DL 5.0 Cartridge Vape, covering specifications, kit contents, operation, charging, cleaning, and warnings.