Pulsar 510 DL Lite Auto-Draw Vape Pen | Manual

Specifications

Size: 4.6 x 0.8 x 0.8 inches (116 x 20 x 20mm)

Maximum Cartridge Size: 0.4 inches (11.5mm) diameter, 2.3 inches (59mm) length

Battery Capacity: 320mAh

Voltage: 3.6V

Charging: USB-C

Resistance: <0.8 Ω

Power On/Off

Quickly pull-draw in air from the mouthpiece 5 times to switch the power on or off. The light will flash once.

Charging

Blue light on: Charging
Light off: Fully Charged
Light will flash 3 times when disconnected from USB

Low Battery

Blue light will flash 10 times to alert the user to low battery, and will then enter standby. Charge before continuing use.

Protection Features

Battery life/cartridge protection: After 10 continuous seconds of use, the blue light will flash 2 times, and the automatic vape time cutoff will activate, turning off the heat (but not the power). Over-voltage/short-circuit protection: blue light will come on for 2 seconds, and the device will fully turn off.

Kit Includes

1 x Pulsar 510 DL Battery
1 x Bottom Magnetic Connector

How to Use

Make sure that the bottom magnetic connector is properly connected to the bottom of the unit. The battery will not charge if the bottom connector is not attached.
Attach battery to USB-C cable and connect to a power source. You will see the light flash once when the battery is connected.
Allow the battery to fully charge before first use. The light will turn blue while charging and turn off when fully charged.
Remove the bottom magnetic connector and firmly screw in the 510 threaded cartridge of your choice.
Insert the cartridge into the device and ensure that the bottom magnetic connector is properly connected. Blue light will turn on for 1 second.
If the unit is powered off, place your lips on the mouthpiece and give it 5 quick pulls to power on.
Simply pull from the mouthpiece to activate the cartridge vapor and enjoy your session!

Cleaning Instructions

Remove the bottom magnetic connector from the battery portion.
Wipe the outside and inside portion of the bottom magnetic connector with an isopropyl alcohol pad. Use an alcohol swab to wipe any excess oil out of the 510 screw-in connector.
To clean the inside air pathway, use an alcohol-soaked swab. Using a circular motion, work your way up and down the air pathway until you do not see any more oil on the swab.
Do not submerge any part of the device in cleaning solution. Allow all parts to air dry prior to resuming use.

Important Safety Warnings

Do not expose to extreme temperatures or direct sunlight.
Do not drop the device or accessories.
Do not drop or submerge in any liquid.
Do not modify the electronics in any way.
This device is intended for adults only. Do not sell or provide to minors. Keep all parts, concentrates, herbs, and liquids away from children and pets. This is not a medical device and is not intended to diagnose, treat, mitigate, cure, or prevent any ailment, disease, or other conditions. Consult a physician before use, especially if you suffer from heart disease or any other medical condition, or if you are pregnant or breastfeeding. Failure to follow any of these instructions could result in product damage, property damage, personal injury, and may void warranty.

Device Diagram Description

The device is a cylindrical vape pen. It features a mouthpiece at the top, a main body containing the battery, and a threaded connection at the bottom for attaching a magnetic connector and a vape cartridge. A warning is displayed stating: "The mouthpiece is NOT removable. Attempting to remove it could impair or permanently disable the breath control functionality." ⚠️

Brand Information:

Pulsar
ENJOY HIGHER CULTURE™
Manufactured by Pulsar®
Asheville, NC 28806
Designed in USA, Made in China

Website: PulsarVaporizers.com

	Pulsar 510 DL Auto-Draw Variable Voltage Vape Pen User Manual User guide for the Pulsar 510 DL auto-draw variable voltage vape pen, detailing specifications, operation, charging, cleaning, and safety guidelines for optimal use.
	Pulsar 510 DL 3.0 Twist Variable Voltage Vape Pen User Manual User manual for the Pulsar 510 DL 3.0 Twist Variable Voltage Vape Pen, detailing specifications, quick start guide, instructions, cleaning, and safety warnings.
	Pulsar 510 DL Centro Instruction Manual & User Guide Detailed instructions and specifications for the Pulsar 510 DL Centro variable voltage vape pen. Learn about operation, charging, cleaning, and safety warnings.
	Pulsar 510 DL 2.0 Auto-Draw Variable Voltage Vape Pen Manual User manual for the Pulsar 510 DL 2.0 Auto-Draw Variable Voltage Vape Pen, including specifications, quick start instructions, operating instructions, and cleaning guidelines.
	Pulsar 510 DL 5.0 Cartridge Vape Instruction Manual Instruction manual for the Pulsar 510 DL 5.0 Cartridge Vape, covering specifications, kit contents, operation, charging, cleaning, and warnings.
	Pulsar 510 DL 2.0 PRO Auto-Draw Variable Voltage Vape Bar Manual Official user manual for the Pulsar 510 DL 2.0 PRO Auto-Draw Variable Voltage Vape Bar. This guide provides detailed specifications, quick start instructions, operating procedures, cleaning advice, and essential safety warnings for the 1000mAh USB-C rechargeable device.
	Pulsar 510 DL 5.0 Cartridge Vape Instruction Manual Comprehensive instruction manual for the Pulsar 510 DL 5.0 cartridge vape, covering specifications, kit contents, power on/off, cartridge insertion, pre-heating, voltage settings, charging, and cleaning instructions.
	Pulsar 510 DL Pipe Manual: Operation and Safety Guide Comprehensive manual for the Pulsar 510 DL Pipe, covering specifications, operating instructions, charging, protection features, and important safety warnings.