PORTIS Shoe Rack Assembly Instructions
Product Information
This document provides assembly instructions for the IKEA PORTIS shoe rack.
Brand: IKEA
Product Name: PORTIS Shoe Rack
Model Numbers: 800.997.90, 301.811.17
Document Reference: AA-197040-2
Dimensions (example): 90x34x28 cm (35 3/8x13 3/8x11 inches)
Parts List
The following parts are included in the package:
- 8x Screws [screw]
- 2x Caps [cap]
Note: A Phillips head screwdriver [screwdriver] is required for assembly but not included.
Assembly Steps
Follow these steps to assemble your PORTIS shoe rack:
Step 1: Assemble the Base and Side Frames
Action: Connect the side frames to the base structure using screws.
Details: You will need 4 screws [screw] for this step. Insert the side frames into the designated slots on the base and secure them by screwing them in place. A close-up diagram shows a screw being inserted and tightened with a screwdriver.
Step 2: Attach the Shelves
Action: Attach the two shelves to the assembled frame.
Details: You will need 4 screws [screw] for this step. Position the shelves onto the support points of the side frames and secure them with screws.
Step 3: Add Protective Caps
Action: Cover the exposed connection points on the base with the provided caps.
Details: You will need 2 caps [cap] for this step. Press the caps firmly onto the designated points on the base of the shoe rack.
General Assembly Notes: The diagrams indicate the use of a screwdriver to tighten screws. Arrows show the direction of insertion for parts and screws. If you encounter difficulties, refer to the IKEA store or website for assistance.
