BRUSALI Shoe Cabinet Assembly Instructions

Important Safety Information

⚠️ WARNING! Furniture tip-over can cause serious or fatal crushing injuries. To prevent tip-over, this furniture MUST be secured to the wall using the provided wall attachment device(s).

Screws and wall plugs for the wall are not included. Use screws and plugs suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.

Parts Included

The package contains the following main components and fasteners:

• Main cabinet panels (sides, top, bottom, back panels)
• Shoe compartment frames and doors
• Feet
• Handles
• Various fasteners including screws (e.g., 16x Part 130449, 26x Part 106562), dowels (e.g., 6x Part 101350), cam lock systems (e.g., 16x Part 119252/119250), brackets (e.g., 6x Part 116713), and connectors (e.g., 6x Part 120292).
• Wall attachment brackets (e.g., 1x Part 112792 each).

Assembly Steps

Step 1

Attach the two base panels together using 16x fasteners (Part 130449).

Step 2

Attach the side support brackets (Part 116713) to the base panels using 6x dowels (Part 101350) and 6x screws (Part 100365).

Step 3

Insert 4x dowels (Part 101350) into the base panel and attach the two vertical support pieces.

Step 4

Insert 2x cam lock housings (Part 119252) and 2x cam lock screws (Part 119250) into the vertical supports.

Step 5

Slide one side panel into place, aligning it with the dowels and cam lock screws.

Step 6

Insert 2x cam lock housings (Part 119252) and 2x cam lock screws (Part 119250) into the side panel.

Step 7

Attach the top panel by aligning it with the vertical supports.

Step 8

Secure the top panel by tightening 4x cam locks (Part 119252/119250).

Step 9

Slide the back panel into the grooves of the cabinet structure.

Step 10

Secure the back panel by tightening 4x cam locks (Part 119252/119250).

Step 11

Attach the other side panel to the cabinet structure.

Step 12

Slide the second back panel into place.

Step 13

Secure the second back panel by tightening 4x cam locks (Part 119252/119250).

Step 14

Attach the two feet to the bottom of the cabinet using 1x dowel (Part 101350) each.

Step 15

Attach the wall mounting brackets (Part 112792) to the top rear of the cabinet.

Step 16

Assemble the shoe compartment frames. Attach the side pieces to the base of each compartment using 6x screws (Part 106562).

Step 17

Note: Avoid incorrect assembly methods as indicated by the crosses (❌) in the diagram.

Step 18

Attach the front panels of the shoe compartments using 2x screws (Part 106562) per panel.

Step 19

Note: Avoid incorrect assembly methods as indicated by the crosses (❌) in the diagram.

Step 20

Attach the front panels of the shoe compartments using 2x screws (Part 106562) per panel.

Step 21

Attach the assembled shoe compartment units to the main cabinet structure.

Step 22

Secure the shoe compartment units using 2x cam locks (Part 112792). ⚠️ Do not use power tools for this step.

Step 23

Secure the shoe compartment units using 2x cam locks (Part 112792). ⚠️ Do not use power tools for this step.

Step 24

The main cabinet structure is now assembled. The final step involves securing the cabinet to the wall using 4x appropriate screws and wall plugs (not included). Ensure the cabinet is stable and safely attached to the wall.

Step 25

Attach the shoe compartment doors to the cabinet. Ensure correct alignment as shown in the diagrams. Use 6x screws (Part 106562) for this step.

Step 26

Attach the handles (Part 130440) to the shoe compartment doors. Use 3x screws (Part 100412) for each handle.

Final Check

Ensure all parts are securely fastened and the unit is stable. For safety, always use the provided wall attachment hardware.