IKEA BISSA Shoe Cabinet

Assembly Instructions and Safety Guide

⚠️ IMPORTANT SAFETY WARNINGS

Serious or fatal crushing injuries can occur from furniture tip-over.

ALWAYS secure this furniture to the wall using tip-over restraints.

To further reduce the risk of serious injury and death from tip-overs:

Place heaviest items in the lower drawer.
Do not set TVs or other heavy objects on top of this product.
Never let children climb or hang on drawers, doors, or shelves.

Parts List

Please check that you have all the parts listed below before starting assembly.

10x Cam Bolt (Part #118331)
10x Cam Lock (Part #118224)
10x Dowel (Part #101350)
4x Shelf Pin (Part #107849)
12x Screw (Part #109535)
4x Cam Lock Housing (Part #120292)
16x Screw (Part #112792)
4x Bracket (Part #116713)
4x Screw (Part #100347)
2x Long Screw (Part #109048)
2x Wall Plug (Part #121714)
2x Washer (Part #100823)

Assembly Instructions

Step 1: Prepare Panels

Insert 10x Cam Bolts (118331) into the pre-drilled holes on the two side panels and the top/bottom panels.

Diagram shows cam bolts being screwed into panels.

Step 2: Attach Brackets to Base

Attach 4x Brackets (116713) to the base panel using 4x Screws (100347) and a hammer.

Diagram shows brackets being hammered into place on the base panel.

Step 3: Insert Dowels (Sides)

Insert 4x Dowels (101350) into the designated holes on the side panels.

Diagram shows dowels being inserted into side panels.

Step 4: Insert Dowels (More)

Insert 2x Dowels (101350) into the designated holes on the side panels.

Diagram shows more dowels being inserted into side panels.

Step 5: Insert Cam Locks (Sides)

Insert 3x Cam Locks (118224) into the designated holes on the side panels.

Diagram shows cam locks being inserted into side panels.

Step 6: Attach Top Panel

Align the top panel with the side panels.

Diagram shows the top panel being positioned onto the side panels.

Step 7: Secure Top Panel

Secure the top panel to the side panels by tightening the 3x Cam Locks (118224) inserted in Step 5.

Diagram shows cam locks being turned to secure the top panel.

Step 8: Tilt Frame

Carefully tilt the assembled frame onto its side.

Diagram shows the frame being tilted.

Step 9: Insert Dowels (Base)

Insert 4x Dowels (101350) into the designated holes on the base panel.

Diagram shows dowels being inserted into the base panel.

Step 10: Insert Cam Locks (More)

Insert 4x Cam Locks (118224) into the designated holes on the side panels.

Diagram shows more cam locks being inserted into side panels.

Step 11: Attach Back Panel

Attach the back panel to the main frame using screws.

Diagram shows the back panel being attached to the frame.

Step 12: Assemble Drawer Mechanisms

Assemble the drawer slide mechanisms. Attach components using 6x Screws (112792) and 4x Cam Lock Housings (120292).

Diagram shows drawer slide components being attached to drawer fronts with screws and cam lock housings.

Step 13: Prepare Drawer Fronts

Attach drawer front panels to the drawer mechanisms. Use 12x Screws (109535) for this step.

Diagram shows drawer fronts being attached to the drawer mechanisms.

Step 14: Secure Drawer Fronts

Secure the drawer fronts to the drawer mechanisms using 2x Screws (109535).

Diagram shows screws being used to secure drawer fronts.

Step 15: Prepare Drawer Fronts (Other Side)

Repeat the process for the other side of the drawer front.

Diagram shows the other side of the drawer front being attached.

Step 16: Secure Drawer Fronts (Other Side)

Secure the drawer fronts to the drawer mechanisms using 2x Screws (109535).

Diagram shows screws being used to secure the other side of the drawer fronts.

Step 17: Insert Drawer Mechanisms into Cabinet

Carefully insert the assembled drawer mechanisms into the main cabinet body. Ensure correct orientation.

Diagram shows the drawer mechanism being inserted into the cabinet. Includes a warning icon ⚠️ and a crossed-out diagram ❌ indicating incorrect insertion.

Step 18: Continue Inserting Drawer Mechanisms

Continue inserting the drawer mechanisms fully into the cabinet body.

Diagram shows the drawer mechanisms being fully inserted.

Step 19: Align Drawer Mechanisms

Ensure the drawer mechanisms are properly aligned within the cabinet.

Diagram shows how to align the drawer mechanisms.

Step 20: Final Drawer Attachment

Finalize the attachment of the drawer mechanisms to the cabinet body. Use 4x Cam Locks (120292) and 4x Screws (112792).

Diagram shows cam locks and screws being used to secure the drawer mechanisms.

Wall Mounting Instructions

To prevent tip-over injuries, this furniture MUST be secured to the wall.

The supplied screws and wall plugs are suitable for most solid (A) and hollow (B) walls. For solid wood (C), use screws without plugs.

If you are uncertain about the correct type of wall fixing, seek professional advice.

Wall Type A: Solid Walls

Use Ø 8 mm drill bit. Secure with Long Screw (109048) and Washer (100823). Wall plugs (121714) may be used if necessary.

Diagram shows drilling into a solid wall, inserting a plug, and securing the furniture with a long screw and washer.

Wall Type B: Hollow Walls

Use Ø 8 mm drill bit. Secure with Long Screw (109048) and Washer (100823). Wall plugs (121714) are recommended.

Diagram shows drilling into a hollow wall, inserting a plug, and securing the furniture with a long screw and washer.

Wall Type C: Solid Wood

Use Ø 3 mm drill bit. Secure directly with screws (no plugs needed).

Diagram shows drilling into solid wood and securing with a screw.

Step 21: Secure Furniture to Wall

Attach the furniture to the wall using the appropriate fixings as described above. Use 2x Long Screws (109048) and 2x Washers (100823).

Diagram shows the furniture being attached to the wall. Includes a warning icon ⚠️ and a crossed-out diagram ❌ indicating the furniture should not be left unsecured.

Final Assembly & Use

Step 22: Attach Drawer Fronts

Attach the drawer fronts to the assembled drawer mechanisms using 4x Screws (109535).

Diagram shows the final attachment of drawer fronts to the cabinet.

Open the drawers to use the shoe cabinet.

Diagram shows the completed shoe cabinet with drawers open.

	IKEA STÄLL Shoe Cabinet Assembly Instructions Comprehensive assembly guide for the IKEA STÄLL shoe cabinet, detailing all steps from frame construction to drawer installation and essential safety warnings, including wall mounting instructions.
	STÄLL Shoe Cabinet Assembly Instructions Official assembly instructions for the IKEA STÄLL shoe cabinet, providing step-by-step guidance and safety information for safe assembly and use.
	BISSA Shoe Cabinet Assembly Instructions - IKEA Step-by-step assembly guide for the IKEA BISSA shoe cabinet with 2 compartments. Includes safety warnings, parts list, tools required, and wall mounting instructions.
	KOMPLEMENT Shoe Organizer Assembly Instructions - IKEA Detailed assembly instructions for the IKEA KOMPLEMENT shoe organizer. This guide provides a step-by-step process, parts list, and visual aids described in text to help you install your shoe storage solution.
	BOVIKSÖN Shoe Rack Assembly Instructions Step-by-step guide for assembling the IKEA BOVIKSÖN shoe rack. Includes parts, assembly steps, and safety warnings for this pine shoe storage unit.
	IKEA HEMNES Shoe Cabinet Assembly Instructions A comprehensive guide to assembling the IKEA HEMNES shoe cabinet, detailing each step with clear instructions and safety information. Includes a parts list and visual descriptions.
	IKEA STÄLL Shoe Cabinet Assembly Instructions Step-by-step assembly instructions for the IKEA STÄLL shoe cabinet. Includes safety warnings, required tools, hardware list, and detailed guidance for building and securely mounting the furniture to the wall.
	IKEA BISSA Shoe Cabinet Assembly Instructions Comprehensive assembly instructions for the IKEA BISSA shoe cabinet, detailing each step with clear diagrams and safety warnings. Includes multilingual support and part identification.