MOES Instruction Manual: Smart Curtain Switch (Wi-Fi+RF)
Model: WS-USR-C / WS-EUR-C
Product Description
This new designed glass panel wireless touch smart curtain switch is designed with many new updates. The WiFi+RF version easily replaces traditional switches with a variety of ways to control. Multi-control association is added into Tuya Smart Life App as a new feature to control with other smart switches, together with the backlight on/off and relay status when power off. Its scratch resistance glass panel is suitable for different decoration styles with its best value.
Safety Information
1. Risk of Electric Shock: Electricity can cause personal injury and property damage if handled improperly. If you are not sure about any part of these instructions, please seek professional assistance from a qualified electrician.
2. Do not disassemble, reassemble, modify, or attempt to repair the product by yourself.
3. This product has no waterproof and dustproof function.
Technical Parameters
- Model: WS-USR-C/WS-EUR-C
- Working Voltage: 90-250V AC, 50/60Hz
- Max. Current: 2.5A/Gang; Total 2.5A
- Load Power: ≤600W
- Standby Power: <0.5W
- Wireless Protocol: Wi-Fi 2.4GHz IEEE 802.11 b/g/n
- Standby Consumption: 0.1mA
- Wireless Range: 30 Meters (Indoor)
Warnings
Turn off the power at the circuit breaker and test that power is off before wiring.
Installation
Attention: Please disconnect the power supply before installing or removing the device to avoid irreversible damage on the device from the electric current or some unpredictable problems such as lamp flashing.
Note:
- Make sure that the power at the circuit breaker is off before wiring.
- Neutral Wire is required. Confirm the wall box contains a Neutral Wire (typically white). If the wall box doesn't have a Neutral Wire, please try another location at your home or call a professional electrician to install the switch.
- The wire colors indicated in this manual are the usual colors and may differ in some houses.
- Ensure the wire conductors are securely fastened to each wire.
- Ensure the Wi-Fi signal is steady and normally working before wiring.
- If you don't have any wiring experience, please call a professional electrician.
Step 1: Turn off power
Turn off the circuit breaker and use the electrical tester to test the power. Ensure the circuit breaker is off before wiring.
Step 2: Remove the old switch
Remove the switch and pull it away from the wall.
Step 3: Identify wires and verify power is off
Identify Line/Load Wire (Note: The color of your wire may be different from the color shown on the manual.)
Verify power is off
We recommend you remove the faceplate from the old switch and use an electrical tester to test all wires connected to the switch to ensure there is no voltage in the circuit. You may need to turn off more than one circuit breaker.
Step 4: Wiring
Take pictures of the wiring.
Follow the wiring diagram to connect the switch wires to the wires in the wall box with the wire conductors.
Wiring Diagram:
Connect the switch wires to the wires in the wall box using wire connectors.
(Diagram showing connections between switch terminals L, L1, L2 and wall wires Live, Load, Neutral, and possibly Ground. Colors are indicative: Live (Brown), Load (Blue), Neutral (Black), Ground (Green/Yellow)).
Step 5: Mount the switch
Open the switch panel from the bottom of the switch with a screwdriver.
Mount the switch with the provided screws and snap the wall plate on it.
Step 6: Turn power back on
Turn the power back on at the circuit breaker and then switch the light on.
Preparation For Use
Download MOES App or scan QR code
Download the MOES App on the App Store or scan the QR code.
[QR Code for MOES App Download]
MOES App is upgraded with much more compatibility than Tuya Smart/Smart Life App, functioning well for scene controlled by Siri, widget and scene recommendations as the fully new customized service. (Note: Tuya Smart/Smart Life App still works, but MOES App is highly recommended)
Registration or Log in
Method One:
- Make sure your phone is connected to Wi-Fi and Bluetooth.
- Scan the QR code to configure the network guide. [QR Code for Network Guide]
- Enter the Register/Login interface; tap "Register" to create an account by entering your phone number to get verification code and "Set password". Choose "Log in" if you already have a MOES account.
Method Two:
- Make sure your phone is connected to Wi-Fi and Bluetooth.
- Reset: Press the switch button for 6 times, and hold on the 6th time, then release until the blue indicator on the switch flashes fast. Pair/Reset is successful.
- Open MOES App, then the prompt page will automatically show on the screen. Click "Add", Select the device you want to add and click "+".
- Enter Wi-Fi Password and click "Next", waiting for completing the connection. Add the device successfully, you can edit the name of the device to enter the device page by clicking "Done".
- Enjoy your smart life with home automation.
Steps for connecting the APP to the device
Write the Wi-Fi credentials to configure the network guide.
[QR Code for Wi-Fi Configuration]
(Screenshots showing the process of entering Wi-Fi credentials and device pairing.)
How to pair/reset Wi-Fi
Press the switch button for 6 times, and hold on the 6th time, then release until the blue indicator on the switch flashes fast. Pair/Reset is successful.
Remote radio frequency (RF) link method:
Pair and clear up the RF code
- How to pair the RF code: Press and hold the touch button until you hear "Di" (1 time), and press the button on the remote control switch. Then it would begin to enter the remote radio frequency (RF) pairing.
- How to clear up the RF code: Press the switch button for a long time until you hear "Di" (1 time), and then keep pressing the button until you hear "Di-Di-Di-Di" (4 times). The RF code is now cleared up.
Note: This operation can only clear one button; repeat the operations for clearing other codes.
FAQ
- After the device is installed, why does the light not respond when I click the switch button?
A: Please cut off the power supply and check whether the connection is correct according to the instructions. - Why is there no reset button on my switch?
A: Hello, generally speaking, the reset button of the switch device is the switch button itself. You can press the switch button to configure the APP according to the instructions. The power indicator light will start to blink when entering successful pairing mode. - What if my smart switch malfunctions and doesn't respond for a long time?
A: Hello, please try to reset the device. Firstly remove the smart switch from your APP and re-configure the network for use.
Enter Smart Life Skill in Alexa APP
- Complete product networking configuration in the App
Complete the device's networking configuration according to the prompts in the App.
Note: In the App, change the name of the device to an easily identifiable name such as "bed light". Names are usually in English. - Configure the Amazon Echo device
(If you have already configured Amazon Echo, you can skip this step. The following instructions are based on the iOS client.)
- Make sure your Amazon Echo device is powered on and connected to a Wi-Fi network.
- Open the Alexa App on your phone. After successful login, tap on the menu in the upper left corner of the Home page, select "Settings" and tap "Set Up A New Device" to set up the Amazon Echo.
- Choose your Amazon Echo device type and language for connecting. Press and hold the small dot on the device until the light turns yellow. Then tap "Continue" to connect to the hotspot.
- After connecting to the Amazon Echo hotspot, return to the page. At this point, the connection is successful.
- Tap "Continue" to proceed to the next step. Choose a Wi-Fi network to connect to. Amazon Echo will take a few minutes to try to connect to the network.
- After the network connection is successful, tap "Continue". An introduction video will appear. After the video ends, tap "Continue" to jump to the Alexa Home page. You have now completed the Amazon Echo's configuration process.
- Key step: Link Skill
- Tap on "Skills" in the Alexa App menu.
- Then search for "App Name" [Placeholder for App Name]. Tap "Enable" to enable the Skill.
- Enter the App account and password, then tap "Link Now" to link your App account to enable the Skill. Now you can start your smart home journey.
- Common commands
Control the device via voice commands; now you can control your smart device with Echo. You can control your device (such as your bedroom light) with the following commands:
- Alexa, turn on/off bedroom light. (Turn on/off the light)
- Alexa, set bedroom light to 50 percent. (Set the light to any brightness)
- Alexa, brighten/dim bedroom light. (Increase/weaken the brightness of the light)
- Alexa, set bedroom light to green. (Adjust the color of the light)
SERVICE
- During the free warranty period, if the product breaks down during normal use, MOES will offer free maintenance for the product.
- Natural disasters/man-made equipment failures, disassembly and repair without the permission of MOES, no warranty card, products beyond the free warranty period, etc., are not within the scope of free warranty.
- Any commitment (oral or written) made by the third party (including the dealer/service provider) to the user beyond the warranty scope shall be executed by the third party.
- Please keep this warranty card to ensure your rights.
- MOES may update or change the products without notice. Please refer to the official website for the updates.
WARRANTY CARD
Product Information
- Product Name: Smart Curtain Switch
- Product Type: Wi-Fi+RF Curtain Switch
- Purchase date:
- Warranty Period:
Dealer Information
- Customer's Name:
- Customer Phone:
- Customer Address:
Maintenance Records
Failure date | Cause Of Issue | Fault Content | Principal |
---|---|---|---|
RECYCLING INFORMATION
All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19/EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority.
Follow Us
Thank you for your support and purchase at MOES. We are always here for your complete satisfaction. Feel free to share your great shopping experience with us.
If you have any other needs, please do not hesitate to contact us first; we will try to meet your demand.
f@moessmart | @moes_smart | @moes_smart | MOES Official | www.moes.net
EC REP: AMZLAB GmbH, Laubenhof 23, 45326 Essen, Germany
UK REP: EVATOST CONSULTING LTD, Address: Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR, Tel: +44-292-1680945, Email: contact@evatmaster.com
Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD, Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China, Tel: +86-577-57186815
After-sale Service: service@moeshouse.com
Made In China
File Info : application/pdf, 1 Pages, 3.04MB
DocumentDocumentReferences
Adobe PDF library 15.00 Adobe Illustrator(R) 17.0Related Documents
![]() |
MOES Smart Curtain Switch Wi-Fi+RF Instruction Manual Comprehensive guide for installing and operating the MOES Wi-Fi+RF Smart Curtain Switch. Learn how to connect to Smart Life/Tuya app and Alexa for voice control. Includes technical specifications, safety warnings, and warranty information. |
![]() |
MOES Smart Curtain Switch Wi-Fi+RF Instruction Manual Comprehensive instruction manual for the MOES Smart Curtain Switch (Wi-Fi+RF model WS-USR-C/WS-EUR-C). Learn about installation, setup, app connection, and integration with Amazon Alexa and Google Home. |
![]() |
Smart Curtain Switch Instruction Manual - 2 Gang Wi-Fi+RF Comprehensive instruction manual for the MOES Smart Curtain Switch, a 2-gang Wi-Fi+RF enabled device. Learn about product features, installation, wiring, app configuration, and integration with Alexa. |
![]() |
Moes Smart Wi-Fi + RF Curtain Switch User Manual User manual for the Moes Smart Wi-Fi + RF Curtain Switch, detailing product features, technical specifications, installation, app setup, and voice control integration with Amazon Alexa. |
![]() |
MOES Smart Curtain Switch Instruction Manual Comprehensive instruction manual for the MOES Smart Curtain Switch, covering safety information, product parameters, wiring diagrams, installation methods, app setup (Wi-Fi and Zigbee), voice control with Alexa, storage, service, and warranty details. |
![]() |
MOES Smart Switch Wi-Fi RF433 Glass Panel Installation and User Manual Comprehensive guide for MOES Wi-Fi + RF433MHz smart glass panel touch switch. Covers installation, wiring, Smart Life/Tuya app setup, multi-control association, voice control with Alexa and Google Home, safety, and warranty. |
![]() |
Moes Smart Curtain Switch Module Instruction Manual Comprehensive instruction manual for the Moes Smart Curtain Switch Module (MS-108ZR), detailing installation, wiring diagrams, technical specifications, app integration with Smart Life, and voice control compatibility with Alexa and Google Assistant. |
![]() |
MOES Smart Light Switch User Manual and Installation Guide User manual for MOES Smart Light Switch (WS-EU-RF/WS-US-RF). Covers product features, safety, installation, Wi-Fi/RF pairing, multi-control association, and Alexa integration. Includes technical specifications and company contact details. |