MAULjet 825 74 LED Floor Lamp

Product Overview & Specifications

The MAULjet 825 74 is an LED floor lamp designed for efficient lighting.

Model: MAULjet 825 74

Power Input: 200-240V~ 50/60 Hz

Power Consumption: 51W

Cable Length: Approximately 1.80 meters

Power Connector: CEE 7/7

Website: www.maul.de

Energy Efficiency: Contains light sources of energy efficiency class E (Art.-No.: 8257409.200) and/or class D (Art.-No.: 8257409.205).

Safety Information:

• Do not expose to water. [??]
• Do not climb on the lamp. [??]
• Keep out of reach of children. [??]

Assembly Instructions

Follow these steps to assemble your MAULjet 825 74 floor lamp.

Step 1: Attach Base to Lower Pole

Connect the base (Part 1) to the lower pole section (Part 4). Secure using three (3) M4 x 30 screws (Part 6) with the SW3 Allen key (Part 7).

Step 2: Connect Pole Sections

Join the upper pole section (Part 2) to the lower pole section (Part 4). Secure using two (2) M4 x 10 screws (Part 5) with the SW2.5 Allen key (Part 8).

Step 3: Prepare Lamp Head Attachment

Prepare to attach the lamp head (Part 3) to the assembled pole. Insert the connecting component into the lamp head.

Step 4: Connect Lamp Head to Pole

Connect the lamp head (Part 3) to the upper pole section (Part 2). Ensure a secure connection, indicated by a "Click" sound.

Step 5: Secure Lamp Head

Firmly attach the lamp head (Part 3) to the pole section (Part 2). Use three (3) M4 x 30 screws (Part 6) and the SW3 Allen key (Part 7) for this step.

Step 6: Final Lamp Head Assembly

Complete the lamp head assembly by securing the final components. This may involve repeating similar fastening procedures as in Step 5.

Spare Parts

The following spare parts are available:

• LED Strip: Art.-No.: 8257409.200
• LED Strip: Art.-No.: 8257409.205
• Driver/Power Supply: Art.-No.: 8257409.210