ASUS ROG STRIX B760-F GAMING WIFI Motherboard Quick Start Guide

Motherboard Layout Overview

The motherboard features various connectors and slots for components:

• CPU Socket: LGA1700
• Memory Slots: DDR5 DIMM_A1, DDR5 DIMM_A2, DDR5 DIMM_B1, DDR5 DIMM_B2
• Expansion Slots: PCIEX16(G5), PCIEX16(G3), PCIEX1(G3)_1, PCIEX1(G3)_2
• Storage Connectors: SATA6G_1 to SATA6G_4, M.2_1(SOCKET3), M.2_2(SOCKET3), M.2_3(SOCKET3), M.2(WIFI)
• Power Connectors: ATX_12V_2, ATX_12V_1, ATX_PWR
• Internal Connectors: CPU_FAN, CPU_OPT, CHA_FAN1-4, AIO_PUMP, RGB_HEADER, ADD GEN 2_1-3, PANEL, COM_DEBUG, T_SENSOR, CLR_CMOS, TB_HEADER, AAFFP, U32G1_E12, U32G2_C4, U32G1_E78, U32G1_E3456, U32G2X2_C1, LAN_U32G2_3
• Rear Panel Connectors: HDMI_DP, AUDIO
• Other Features: BIOS, DIGI+ VRM, Super I/O

Installation Steps

Step 1: Install the CPU

Carefully align the CPU with the socket markings and gently place it in. Secure the CPU with the retention mechanism.

Step 2: Install the CPU Fan

Mount the CPU cooler according to its specific instructions, ensuring proper contact with the CPU.

Step 3: Install Memory Modules

Open the clips on the DIMM slots. Align the memory module notch with the slot key and press down firmly until the clips lock into place.

Step 4: Install Storage Devices

Install M.2 SSDs and other storage devices as per the user guide. Refer to the motherboard layout for M.2 slot locations and supported sizes (e.g., 22110, 2280, 2260, 2242).

Step 5: Install Expansion Card(s)

Remove the corresponding expansion slot cover(s) on the chassis. Align the expansion card with the PCIe slot and press down firmly until it is seated.

Step 6: Install the System Panel Connector

Connect the front panel connectors (power switch, reset switch, HDD LED, etc.) to the corresponding headers on the motherboard.

Step 7: Install ATX Power Connectors

Connect the main 24-pin ATX power connector and the 8-pin (or 4+4 pin) ATX 12V power connector from the power supply unit to the motherboard.

Step 8: Connect Input/Output Devices

Connect your monitor, keyboard, mouse, and other peripherals to the appropriate ports on the rear I/O panel.

Step 9: Power On and Install Operating System and Drivers

Connect the power cord, turn on the system, and proceed to install your operating system and necessary drivers from ASUS or component manufacturers.

Important Notices

Australia Statement Notice

ASUS products come with warranties consistent with the Australian Consumer Law. For details, visit https://www.asus.com/support/. Consumers are entitled to a replacement or refund for major failures and compensation for other foreseeable loss or damage.

India RoHS

This product complies with the “India E-Waste (Management) Rules, 2016”. It restricts the use of hazardous substances like lead, mercury, and cadmium above specified concentrations.

Türkiye RoHS

Complies with AEEE Yönetmeliği.

HDMI Trademark Notice

HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks of HDMI Licensing Administrator, Inc.