Edifier N300 Multimedia Speakers

1. Package Contents

• Main Speaker
• Satellite Speaker
• Anti-vibration Pads
• Main-Satellite Speaker Connection Cable
• Power Cable
• USB Adapter
• Warranty Card
• 3.5mm Audio Cable
• Type-C Data Cable
• User Manual Card

Note: The images in this manual are schematic. Information and parameters may differ from the actual product due to technical and system upgrades. Please refer to the actual product.

2. Function Description

Main Speaker Top Panel

• 1. Mode Indicator Light:
• Bluetooth Mode: Blue light
• Sound Card Mode: Red light
• AUX Mode: Green light
• 2. Power On/Off & Mode Switch:
• Long press: Power On/Off
• Short press: Switch Mode (Bluetooth/Sound Card/AUX)
• 3. Volume Down: Press to decrease volume.
• 4. Volume Up: Press to increase volume.
• Touch Control Area:
• Mute/Unmute (AUX Mode): Short press [mute symbol]
• Play/Pause (Bluetooth/Sound Card Mode): Short press [play/pause symbol]
• Next Track (Bluetooth/Sound Card Mode): Swipe right on [volume up symbol] and [volume down symbol]
• Previous Track (Bluetooth/Sound Card Mode): Swipe left on [volume up symbol] and [volume down symbol]

Main Speaker Rear Panel

• 5. AUX Input Port
• 6. Sound Card Input Port
• 7. Satellite Speaker Connection Port
• 8. Power Cable Port

Satellite Speaker Rear Panel

• 9. Main Speaker Connection Port

Note: Ensure the arrow on the satellite speaker connection cable plug points upwards when connecting.

3. Connection and Usage Instructions

1. Connect the speakers.
2. Connect the speakers to the audio source device.
3. Connect the power.

Operation Instructions

Bluetooth Input

• Short press the [power symbol] button on the speaker to switch to Bluetooth mode. The indicator light will flash blue rapidly, indicating Bluetooth is ready for connection.
• Search for "EDIFIER N300" on your Bluetooth device.
• Once connected, the indicator light will change from flashing blue to solid blue. You can now use the speakers.
• Note: If a PIN is required for Bluetooth connection, enter "0000". Ensure your audio source device supports A2DP and AVRCP protocols for full Bluetooth functionality.

Bluetooth Hidden Mode

• If no Bluetooth connection is established within 30 minutes, the speaker's Bluetooth will automatically hide (become unsearchable), and the indicator light will show a breathing blue state.
• To exit hidden mode, short press the [power symbol] button. The indicator light will change from breathing blue to flashing blue, and the speaker will attempt to reconnect to the last paired device.

Disconnect Bluetooth

• Simultaneously long press the [volume down symbol] and [volume up symbol] buttons to disconnect Bluetooth.

AUX Mode

• Connect the audio cable to the speaker and your device.
• Short press the [power symbol] button on the speaker to switch to AUX mode. The indicator light will turn solid green, indicating a successful connection.
• Select audio files on your playback device to use.

Sound Card Mode

• Connect the Type-C data cable to the speaker and your device.
• Short press the [power symbol] button on the speaker to switch to Sound Card mode. The indicator light will turn solid red, indicating a successful connection.
• Select audio files on your playback device to use.

4. Download and Install EDIFIER Connect App

1. Scan the QR code for "EDIFIER Connect" to download and install the app on your mobile phone.
2. Enable Bluetooth on your phone and search for and connect to "EDIFIER N300".
3. Open the EDIFIER Connect App. It will automatically navigate to the speaker settings interface, allowing you to make personalized adjustments.

5. Specifications

(Standard: SJ/T 11540-2015)

6. Troubleshooting

• Speaker Noise Issues?
  Edifier speakers feature low noise. Some audio sources may have significantly higher noise levels. To check, disconnect the audio cable, turn the volume up, and ensure that from 1 meter away, you can barely hear any sound from the speakers.
• Cannot search for Bluetooth "EDIFIER N300" under Bluetooth input?
  1. Check if the speaker is powered on.
  2. Check if the input is switched to Bluetooth.
  3. Try long-pressing the [volume down symbol] and [volume up symbol] buttons simultaneously to disconnect any existing Bluetooth connection, then search for "EDIFIER N300" again.
  4. Turn off the speaker, then turn it back on, switch to Bluetooth input, and search for "EDIFIER N300" again.
• No sound from the speaker, what to do?
  1. Check if the power plug is securely inserted and the power switch is on.
  2. Check if the audio source and connection cable are normal.
  3. Check if the audio source signal output is normal.
  4. Check if the volume on the speaker or audio source is turned down to minimum.
  5. Disconnect the speaker's power and then restart it.

7. Care and Maintenance

Please read the following suggestions to comply with warranty terms and extend product lifespan:

• To reduce the risk of fire and electric shock, do not expose this product to rain or moisture.
• Do not use this product near water, immerse it in liquid, or allow liquid to drip or splash onto it.
• Do not install or use near any heat sources, such as radiators, heat registers, stoves, or other heat-producing equipment.
• Do not place the product in direct sunlight or areas with high temperatures, as high temperatures can shorten the lifespan of electronic components, damage the battery, and deform plastic parts.
• Do not place the product in extremely cold areas, as this may damage the internal circuit board.
• Do not attempt to disassemble the product. Non-professional disassembly may damage the product.
• Do not drop, vibrate strongly, or strike the product with hard objects to avoid damaging internal circuits.
• Do not use harsh chemicals or cleaning agents to clean the product.
• Do not scratch the product surface with sharp objects, as this may damage the casing and affect its appearance.

If the product does not function properly, please take it to your qualified service provider for assistance.

Scan WeChat QR code for more information.