MAUL Mobiles Whiteboard 2000
Model: 637 10
Parts List
| Part No. | Quantity | Description |
|---|---|---|
| 1 | 1x | Whiteboard Frame Top Bar |
| 2 | 2x | Whiteboard Frame Side Support |
| 3 | 1x | Whiteboard Frame Bottom Bar |
| 4 | 1x | Whiteboard Frame Cross Brace |
| 5 | 6x | M6 x 55 Screw |
| 6 | 2x | M8 x 17 Screw |
| 7 | 2x | Wheel Assembly |
| 7a | 2x | Wheel Bolt |
| 7b | 2x | Wheel Nut |
| 7c | 1x | SW4 Allen Key |
| 8 | 2x | Support Bracket |
| 9 | 4x | Connector Plate |
| 10 | 4x | Ball Caster |
| 11 | 1x | SW4 Allen Key |
| 12 | 2x | 35 x 20 Screw |
| 13 | 2x | Ø20 Screw |
| 14 | 4x | M6 x 55 Screw |
| 15 | 4x | M8 x 17 Screw |
| 16 | 1x | SW4 Allen Key |
Assembly Overview
The MAUL Mobiles Whiteboard 2000 is assembled using the provided parts. The main structure consists of a top bar (1), two side supports (2), and a bottom bar (3). These are connected using connector plates (9) and M6 x 55 screws (5). A cross brace (4) adds stability between the side supports. Support brackets (8) are attached to the side supports. The wheel assemblies (7), comprising wheels, bolts (7a), and nuts (7b), are fitted to the bottom of the frame. Ball casters (10) are attached to the feet. The assembly process requires the included SW4 Allen keys (7c, 11, 16) and utilizes various screws including M8 x 17 (6, 15), 35 x 20 (12), and Ø20 (13).
Important Handling Note
For optimal use and to protect the surface, magnets should not be slid across the whiteboard. Instead, they should be lifted off the surface and repositioned.
Recycling Information
This product is subject to separate collection for waste electrical and electronic equipment. The packaging material (PAP) should also be disposed of responsibly. Please verify your local municipal regulations for proper disposal and recycling procedures. ♻️ ??
