MAULstandard Mobile Whiteboard
Model Numbers: 645 92, 645 93, 645 94, 645 95, 645 96, 646 02, 646 03, 646 04, 646 05, 646 06
Brand: MAUL
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| 1 | Stand upright part | 1x |
| 2 | Horizontal bar | 1x |
| 3 | Vertical support part | 1x |
| 4 | Vertical support part | 2x |
| 5 | Base frame part | 1x |
| 6 | Whiteboard surface | 1x |
| 7 | Washer (Ø 6.3) | 4x |
| 8 | Bolt (M6 x 70) | 8x |
| 9 | Bolt (M6 x 40) | 8x |
| 10 | Hex key (SW5) | 1x |
| 11 | Bolt (M5 x 8) | 8x |
| 12 | Caster wheel | 4x |
| 13 | Support rail | 1x |
| 14 | End cap/plug | 6x |
| 15 | Knob base | 1x |
| 16 | Rotating bracket | 1x |
| 17 | Washer (Ø 8.4) | 1x |
| 18 | Washer | 1x |
| 19 | Handle/knob | 1x |
| 20 | Bolt (M5 x 8) | 4x |
| 21 | Hex key (SW12) | 1x |
| 22 | Hex key (SW4) | 1x |
Assembly Instructions
Step 1: Base Assembly
Assemble the base. Attach the two vertical support posts (3) to the base frame (5) using four bolts (8) and four washers (7). Insert two end caps (14) into the top of the vertical support posts (3). Attach the four caster wheels (12) to the base frame (5). [⚠] 2x
Step 2: Attach Horizontal Bars (Part 1)
Attach the horizontal connecting bars (2) to the vertical support posts (3). Use four bolts (9) and four washers (11) for each bar. Ensure bolts are inserted into the correct pre-drilled holes. [⚠] 4x
Step 3: Attach Horizontal Bars (Part 2)
Attach the other ends of the horizontal connecting bars (2) to the vertical support posts (3). Use four bolts (11) for each bar. [⚠] 4x
Step 4: Insert End Caps
Insert the remaining two end caps (14) into the top of the vertical support posts (3). [⚠] 2x
Step 5: Attach Support Rail
Slide the support rail (13) onto the horizontal bar (2). [↓]
Step 6: Assemble Rotation Mechanism
Assemble the rotation mechanism. Attach the knob base (15) to the rotating bracket (16) using the provided washers (17, 18). Insert this assembly into the vertical support post (4) and attach the handle (19). [⚠] 2x
Step 7: Mount Whiteboard Surface
Slide the whiteboard surface (6) into the vertical support posts (3). [←]
Step 8: Secure Whiteboard Surface
Secure the whiteboard surface (6) to the frame using two bolts (20). (Note: Parts list indicates 4x bolts (20) are supplied). [⚠] 2x
