ONE FOR ALL URC-6430 Universal Remote Control

Instruction Manual & Code List

Introduction

This document provides instructions for setting up and using the ONE FOR ALL URC-6430 universal remote control.

Getting Started

Batteries

Insert 2 new AAA batteries. After inserting the batteries, the TV key should be blinking every 3 seconds. If not, press and release any key.

Region Setting

The remote features a Region Setting to configure the Brand-Set-List (see SimpleSet) specifically for your region (e.g., GB/IRL, Deutschland, France, España, Italia, INT). Press and hold the digit corresponding to your region for 3 seconds. The TV LED will blink twice. A reset procedure is available if the wrong region is selected by holding 'Setup', pressing 'POWER', and then holding the correct region digit for 3 seconds.

SimpleSet Setup

This feature helps configure the remote for your devices. Check if your device brand is listed in the SimpleSet Brand List. If yes, remember the digit assigned to your brand and follow steps 1, 2, 3, and 4 from SimpleSet. If no, find your brand in the Code List and follow the Direct Code Set Instructions or find your brand at www.simpleset.com. The Auto Search function can be used if your brand is not listed at all.

SimpleSet Brandset List

Lists brands for TV, Television/LED/Plasma/LCD/Projector, PVR (Digital TV Receiver, Satellite/Cablebox Set-Top-Box), and DVD (DVD player/DVD-R/Blu-ray) devices across various regions (GB/IRL, Deutschland, France, España, Italia, INT).

Device Setup Process

To set up a device (e.g., Samsung TV):

Ensure your TV is switched on (not on standby).
Press and hold the "Setup" key for 3 seconds. The LED will blink twice.
Select the device key (e.g., TV) for the device type you wish to control.
Press and hold the "Digit Key" assigned to your brand (e.g., "Digit 9" for a Samsung TV) until your device switches OFF. Release the "Digit Key" as soon as your device switches OFF.

If your device does not switch OFF, repeat steps 2, 3, and 4.

Problems & Solutions (SimpleSet)

Troubleshooting tips for devices still not switching OFF, devices switching OFF but not being controllable, or ONE FOR ALL controlling the device but some keys not working properly. Solutions include trying Direct Code Set, Auto Search, or visiting www.simpleset.com.

Keypad Functions

Defines the function of various keys:

= POWER: Turns the device on/off.
= "watch tv": See CombiControl.
= Setup mode: Press and hold for 3 seconds.
= "watch movie": See CombiControl.
= Copy mode: Press and hold for 3 seconds.
= BACK: Returns to the previous screen/state.
= FAST FORWARD: Advances playback quickly.
= SKIP FORWARD: Skips forward (press and hold briefly).
= REWIND: Rewinds playback.
= SKIP BACK: Skips backward (press and hold briefly).
= TEXT OFF: In TV Mode, turns off teletext.

CombiControl

CombiControl allows control of multiple devices without needing to select the corresponding device key. The functionality of the devices is logically divided on the ONE FOR ALL keypad. It works automatically once at least 2 devices are set up (e.g., a TV and a PVR).

Pressing "watch tv" configures keys: AV, MUTE, VOLUME +/- control the TV; all other keys control the PVR. POWER (3 sec. hold) sends power signal to both devices.
If a DVD or Blu-ray player is also set up on the DVD key, pressing "watch movie" configures keys: AV, MUTE, VOLUME +/- control the TV; all other keys control the DVD/Blu-ray player. POWER (3 sec. hold) sends power signal to both devices.

Copy Function (Learning)

The Learning feature allows you to copy one or more functions from your original remote control onto your ONE FOR ALL remote.

Press and hold "Copy" for 3 seconds. The LED will blink twice.
Select the device key (e.g., TV) for the device type you wish to copy.
Align the original remote and the ONE FOR ALL remote, facing each other (IR emitters 2-5 cm apart). Ensure they are at the same height.
Press the function key on the original remote, then the target key on the ONE FOR ALL remote. The LED will flash rapidly. Repeat for other functions.
Press and hold "Copy" for 3 seconds to exit the Copy feature. The LED will light up twice.

Instructions are provided for deleting a copied function.

Direct Code Set

Use this method if SimpleSet is not successful. Find the code for your device in the Code List. Codes are listed by device type and brand name, with the most popular code listed first. Ensure your device is switched on (not on standby).

Press and hold the "Setup" key for 3 seconds. The LED will blink twice.
Select the device key (e.g., TV) for the device type you wish to control.
Enter the first 4-digit code listed for your brand (e.g., 0556 for a Bennett TV). The LED will blink twice.
Aim the ONE FOR ALL at your device and press POWER. If your device switches OFF, it should be ready to operate your device.

If your device does NOT switch OFF, repeat the Direct Code Set instructions with the next code listed for your brand.

Problems & Solutions (Direct Code Set)

Troubleshooting tips for when the ONE FOR ALL controls the device but some keys do not work properly, or if the Direct Code Set is not successful. Solutions include trying the next code for your brand or using Auto Search or www.simpleset.com.

Auto Search

Use this method if Direct Code Set is not successful. Find the code for your device in the Code List. Ensure your device is switched on.

Press and hold "Setup" for 3 seconds. The LED will blink twice.
Select the device key (e.g., TV) for the device type you wish to control.
Press and release OK.
Point the remote at your device. The remote will now send a different POWER OFF signal (automatically every 3 seconds) going through all the brands stored in the memory. Press and release OK as soon as your device switches OFF.

If your device switches OFF but you still cannot control it, switch it back ON manually and repeat Auto Search, ensuring you press and release OK as soon as the device switches OFF.

Problems & Solutions (Auto Search)

Troubleshooting tips for devices switching OFF but not being controllable, or keys not working correctly. Solutions include repeating Auto Search or visiting www.simpleset.com.

Code List

The document includes an extensive Code List containing thousands of codes for numerous brands across various device types (TV, PVR, DVD). This list is crucial for manual setup when SimpleSet or Auto Search methods are not sufficient.

Warranty Information

Details the ONE YEAR WARRANTY provided by UEI Electronics Private Ltd for the remote control. It covers manufacturing defects under normal use and requires the original purchase receipt for service. Specific terms and conditions apply, excluding damage from misuse, accidents, or unauthorized modifications. The warranty is valid only within India.

Warranty service contact information is provided for various countries including the UK, Ireland, Australia, New Zealand, South Africa, Deutschland, España, France, Italia, Luxemburg, Portugal, Schweiz/Suisse/Svizzera, Österreich/Austria, Nederland, België/Belgique, Magyar/Hungary, Polska, Türkiye, Česká/Czech, Slovenská/Slovakia, Hrvatska/Croatia, Danmark, Norge, Sverige, Suomi/Finland, Ελληνική/Hellas/Greece, Русский/Russia, Ykpaïha/Ukraine, България/Bulgaria, România. Information for India is also provided.

	One For All URC-7960 Universal Remote Control Instruction Manual Comprehensive guide to setting up and using the One For All URC-7960 universal remote control, covering SimpleSet, Direct Code Setup, Search Method, Volume Control, Learning functions, and SmartControl settings.
	One For All URC 6820 Universal Remote Control: Simple Setup Guide Learn how to set up your One For All URC 6820 universal remote control using Learning, SimpleSet, or Code Setup methods. This guide provides step-by-step instructions for controlling your TV, Set Top Box, and Audio devices.
	ONE FOR ALL URC-7140 Universal Remote Control User Manual Comprehensive guide to setting up and using the ONE FOR ALL URC-7140 universal remote control. Learn how to program your remote for TV, SAT, DVD, and AMP devices using SimpleSet, Direct Code Setup, Search Method, and advanced features like Volume Control and Combi Control.
	One For All OFA Streamer URC 7935 Remote Control Setup Guide Comprehensive guide to setting up and using the One For All OFA Streamer URC 7935 universal remote control for streaming devices, TVs, and audio receivers. Includes SimpleSet, code setup, learning functions, and customization.
	ONE FOR ALL URC4922 TCL Replacement Remote Control User Manual User guide for the ONE FOR ALL URC4922 remote control, designed for TCL TVs. Features include button descriptions, SimpleSet and Code configuration, function programming, app shortcut setup, and an extensive TV brand code list.
	One For All URC 6820 Universal Remote Control Simple Setup Guide Learn how to set up your One For All URC 6820 universal remote control using the Learning, SimpleSet, or Code Setup methods. This guide provides step-by-step instructions for controlling your TV, Set Top Box, and Audio devices.
	One For All URC 7955 Remote Control Setup Guide A comprehensive guide to setting up the One For All URC 7955 Smart Control remote. Learn how to use SimpleSet, set up by code, learn functions, program macros, and utilize the NETTV feature for streaming services. Includes information on volume lock, activities, and the companion app.
	ONE FOR ALL URC-8350 Universal Remote Control Instruction Manual Comprehensive user guide for the ONE FOR ALL URC-8350 universal remote control, detailing setup, keypad functions, macros, learning features, code updates, and troubleshooting.