Chapter 1 LOCATION OF CONTROLS
The following controls and indicators are located on the alarm clock:
- 1. DST Indicator: Indicates Daylight Saving Time status.
- 2. PM Indicator: Shows PM time when active.
- 3. AM Indicator: Shows AM time when active.
- 4. LOW DIMMER Indicator: Indicates low dimmer mode is active.
- 5. Alarm Indicator: Shows when an alarm is set and active.
- 6. Battery Compartment Cover: Access point for backup batteries.
- 7. DST ON/OFF Slider: Slider to enable or disable Daylight Saving Time.
- 8. Time Format Slider: Slider to switch between 12-hour and 24-hour formats.
- 9. Set Time Button: Button to initiate time setting mode.
- 10. Alarm Volume Slider: Slider to adjust the alarm volume.
- 11. Alarm ON/OFF Slider: Slider to turn the alarm function on or off.
- 12. Set Alarm Button: Button to initiate alarm setting mode.
- 13. Multi Color Button: Button to cycle through night light and display colors.
- 14. Type-C Output Charging Port: Port for charging external devices via Type-C.
- 15. USB Output Charging Port: Port for charging external devices via USB-A.
- 16. DC IN: Power input jack for the main power adapter.
- 17. Speaker: Emits alarm sounds and other notifications.
- 18. Hour Button/Light Dimmer Button: Adjusts the hour during time/alarm setting and controls night light brightness.
- 19. Minute Button/Display Dimmer Button: Adjusts the minute during time/alarm setting and controls display brightness.
- 20. SNOOZE/LIGHT Button: Activates snooze function when alarm sounds, or turns on/off the night light.
Chapter 2 PACKAGE LIST
The package for your Mesqool CR1008R Digital LED Alarm Clock includes:
- 1 x Multicolor Digital Alarm Clock
- 1 x Power Cord (Length: 1.5M/5ft)
- 1 x USB Power Adapter (DC 5V/1A)
- 1 x User Manual
Chapter 3 POWERING ON
- Connect the power cord to the DC IN jack on the alarm clock. Plug the other end into a 100~240V AC wall power outlet.
- Install two 1.5V "AAA" size batteries into the proper terminals within the battery compartment. This will memorize the time setting and ensure the alarm functions during a power outage.
NOTE: Batteries (not included) are for backup only and do not support time display or the night light function.
Chapter 4 TIME SETTING
Setting the Time
- Press the [Set Time Button] once. The display will start flashing, indicating it's ready for time setting.
- Press the [Hour Button] to set the desired hour. Press the [Minute Button] to set the desired minute.
- Press the [Set Time Button] again to save the time, or wait for approximately 5 seconds for the settings to confirm automatically.
Adjust Display Brightness
Press the [Hour Button] or [Minute Button] to adjust the brightness of the digits to your preference.
Switch DST Time
Slide the [DST ON/OFF Slider] to turn the Daylight Saving Time function on or off.
Switch 12H/24H Time Format
Slide the [Time Format Slider] to change the time format between 12-hour (AM/PM) and 24-hour display.
Chapter 5 ALARM SETTING
Setting the Alarm
- Ensure the [Alarm ON/OFF Slider] is set to the "ON" position (towards the left).
- Press the [Set Alarm Button]. The alarm indicator [ALM] will light up, and the display will start flickering, ready for alarm time input.
- Press the [Hour Button] to set the alarm hour, and press the [Minute Button] to set the alarm minute.
- Press the [Set Alarm Button] to save the alarm time. The settings will confirm automatically after about 5 seconds.
Alarm Volume
Use the [Alarm Volume Slider] to adjust the alarm volume to your preferred level: [LOW], [MED], or [HIGH].
Turning Off the Alarm
When the alarm sounds:
- Press the [Snooze/Light Button] to temporarily silence the alarm for 9 minutes. The alarm will repeat every 9 minutes.
- Press the [Alarm Button] to turn off the alarm for the next 24 hours. The alarm indicator [ALM] will remain lit, signifying the alarm is still active for the following day.
- To completely cancel the alarm, slide the [Alarm ON/OFF Slider] to the "OFF" position. The alarm indicator [ALM] will disappear from the display.
Chapter 6 NIGHT LIGHT
Turning On the Night Light
Press the [Snooze/Light Button]. The night light will illuminate.
Switching Night Light Color
With the night light on, press the [Snooze/Light Button] repeatedly to cycle through the available colors: Oyster White, Shocking Pink, Green, Cobalt Blue, Sky Blue, Sunrise Orange, Violet, and Color-changing mode.
Adjusting Night Light Brightness
Press the [Hour Button] or [Minute Button] to adjust the brightness of the night light to your preference.
Turning Off the Night Light
Long press the [Snooze/Light Button] for 2 seconds, or press it repeatedly until the night light is turned off.
Chapter 7 RGB DISPLAY MODES
Press the [Multi Color Button] to cycle through the different RGB display modes. The digits will transition through 10 available colors, including:
- Random Color
- RGB Left to Right Flowing
- RGB Top Downward Flowing
- White
- Red
- Green
- Blue
- Ice Blue
- Pink
- RGB Changing
Notice: When the digits are set to White, Red, Green, Blue, Ice Blue, or Pink, you can utilize the low dimmer function (using the [Minute Button/Display Dimmer Button]) for reduced light output during sleep.
Chapter 8 OUTPUT CHARGING
You can charge external devices, such as phones or tablets, by connecting their charging cables to the Type-A or Type-C output charging ports located on the back of the alarm clock. The alarm clock is capable of charging multiple devices simultaneously. The maximum charge current provided is 1 Ampere.
Chapter 9 WARRANTY
45-Day Full Refund: If you are not satisfied with the product or have any questions, please contact Mesqool for a full refund or technical support.
18-Month Warranty: For any quality-related issues that occur within 18 months of purchase, please contact Mesqool for a replacement or partial refund.
Life-Time Free User Support: Mesqool offers complimentary lifetime user support. Do not hesitate to contact them if you have any questions or concerns.
