Mesqool CR1025 Digital Alarm Clock Radio

Cancel the Alarm

1. Press the Alarm button, the alarm icon will turn off, indicating that the alarm has been canceled.

(If you want to turn on the alarm again, you can press the Alarm button again, the alarm icon will light up, indicating that the alarm has been turned on.)

Snooze Mode

1. When the alarm rings, pressing the [Snooze/Light button] will pause it, and it will resume after 9 minutes. All buttons except the Alarm button, including the knob, have the Snooze function.
2. The Alarm button can pause the alarm for the current day.

NOTE: If no action is taken when the alarm rings, it will continue for 60 minutes and then automatically shut off.

Charging Other Devices

This alarm clock has two ports, [USB port] and [Type-C port], which are compatible with charging two mobile devices at the same time (charging cable not included), with a maximum charging current of 1A.

Note: Type-C port also supports input, so you can also use the regular Type-C cable as a power cable.

Change 12/24 Hour Time Display Format

1. To switch the time display format of 12/24 hours, press and hold the 12/24h button for about 2 seconds. In the 12-hour time format, the AM/PM icon will be displayed.

Dimmer Setting

1. To adjust the display brightness, press the Dimmer button once, then press it again in succession or turn the knob (either direction) to adjust the brightness level.

NOTE: 1. When playing radio or Bluetooth music, only by pressing Dimmer button continuously or rotating the right knob can adjust the display brightness (the left knob controls the machine volume). 2. When adjusting to the lowest brightness, a low brightness icon will appear to indicate that it is currently the lowest brightness level, and the icon will disappear after 20s of display (after you press any other button, the icon will be displayed again).

Sleep Timer Setting

1. When using the FM radio and Bluetooth speaker functions, you can set a sleep timer to control playback duration. Press the [SLEEP TIMER button] on top left to access the settings.
2. Rotate the top knob to select the desired duration: 120-90-60-30-15 minutes, and OFF.

Night Light

Press the LIGHT button to turn on the night light, and press it again to turn it off. Note that the night light does not function when the alarm clock is ringing.

Bluetooth Setting

1. Press the [Power Mode button] repeatedly to enter Bluetooth mode. The [Bluetooth icon] will start flashing, indicating it's ready for pairing.
2. On your phone, locate and connect to the Bluetooth named "CR1025". Once connected, the [Bluetooth icon] will stop flashing, and you'll hear a sound from the device indicating successful connection. (To switch the connected device, simply press the Pair button to initiate re-pairing.)
3. Use the right knob to select the songs, twist left for the previous song, and twist right for the next one.
4. Adjust the volume level by turning the left knob. The volume has 16 levels (max volume is 116dB).
5. While playing music via Bluetooth, press the Play button to pause or resume playback.

NOTE: 1. When playing music via Bluetooth, if you find that the 16-level volume is still too low, it might be due to low phone volume. Simply increase the phone volume to amplify the device's sound. 2. While setting the alarm clock in radio or Bluetooth mode, there might be a delay in adjusting the alarm volume due to program instruction reception delays. This delay is normal.

FM Radio Operation Guide

1. Activate FM Radio Mode: Press the [Power Mode button] until the radio icon lights up.
2. Tuning to Stations: Auto-Scan: Press the [SCAN button] to automatically search and store up to 20 stations. Manual Search: Rotate the [SCAN knob] to browse frequencies.
3. Manually Save a Station: Rotate the [TU/ knob] to find your desired frequency. Press and hold the [Preset Pair button] for 2 seconds. Rotate TU/ to select a storage slot (P01-P20). Press [Preset Pair button] again to save the station.
4. Select a Saved Station: Briefly press [Preset Pair button] to enter preset mode. Continuously press [Preset Pair button] or Rotate TU/ to cycle through saved stations (P01-P20).
5. Adjust Volume: Turn the left knob to control volume (16 levels max).