Mesqool CR1008 Digital LED Alarm Clock

Chapter 1 LOCATION OF CONTROLS

The front of the clock features a digital display for time. Below the display are various controls. The numbered controls are:

1. [PM Indicator]
2. [DST Indicator]
3. [Alarm Indicator]
4. [Dimmer Slider]
5. [Time Format Slider]
6. [Alarm Volume Slider]
7. [Alarm ON/OFF Slider]
8. [Set Time Button]
9. [Alarm Pause Button]
10. [Set Alarm Button]
11. [DC IN] port
12. [Speaker]
13. [USB Charging Port]
14. [Battery Compartment Cover]
15. [Snooze/Light Button]
16. [Hour Button]
17. [Minute Button]

The rear panel includes a [DC IN] port for power and a [USB Charging Port]. The [Battery Compartment Cover] is typically located on the bottom or back of the unit.

Chapter 2 POWERING ON

1. Install 2 x 1.5V "AAA" size batteries into the battery compartment to memorize time settings. The alarm will ring in case of power outage. Note: Batteries are not included and do not support time display or other functions.
2. Connect the adapter line to the [DC IN] jack, then plug into a 100~240V AC wall power outlet.

Chapter 3 TIME SETTING

1. Press the [Set Time Button] once; the display will start flashing.
2. Press the [Hour Button] to set the hour, and the [Minute Button] to set the minute.
3. Press the [Set Time Button] to save the time, or wait for another 5 seconds for automatic confirmation.

To change the 12H/24H time format, slide the switch button to the desired format.

Chapter 4 ALARM SETTING

1. Ensure the [ON/OFF Switch] is set towards the left "ON".
2. Press the [Set Alarm Button]. The [ALM Indicator] will light up, and the display will start flickering.
3. Press the [Hour Button] to set the hour, and the [Minute Button] to set the minute.
4. Press the [Set Alarm Button] to save the alarm time, or wait for another 5 seconds for automatic confirmation.
5. Use the [Slide switch button] to adjust the alarm volume to [Low], [Med], or [High].

Turn off Alarm

When the alarm goes off:

• Press the [Snooze/Light Button] to temporarily turn off the alarm for 9 minutes. The alarm will ring again every 9 minutes.
• Press the [Alarm Pause Button] to turn off the alarm for 24 hours. The [ALM Indicator] will remain on, indicating the alarm is still activated and will ring after 24 hours.
• To cancel the alarm completely, slide the [ON/OFF Switch] to "OFF". The [ALM Indicator] will disappear from the display.

Chapter 5 DIMMER

Use the [Slide switch button] to adjust the display brightness to your preference, from [Low] to [High].

Chapter 6 NIGHT LIGHT

1. To turn on the night light, press the [Snooze/Light Button].
2. To turn off the night light, long press the [Snooze/Light Button] for 2 seconds or press it repeatedly until the light turns off.
3. To switch the night light color, press the [Snooze/Light Button] when the night light is on. The available colors are: Cobalt Blue, Sky Blue, Green, Oyster White, Sunrise Orange, Shocking Pink, and Violet.

Chapter 7 DST SWITCH

1. To activate Daylight Saving Time (DST), hold press the [Set Time Button] until the [DST Indicator] lights up. The current time on the display will advance by one hour.
2. To turn off DST, hold press the [Set Time Button] until the [DST Indicator] turns off.

Chapter 8 USB CHARGING

You can plug a charging cable into the device to charge your phone or tablet. The device can charge both your phone or tablet simultaneously. The maximum charge current is 1 Ampere.

The rear of the clock shows a [DC IN] power input port and two [USB Charging Port]s, each labeled '5V 1A'.

Chapter 9 WARRANTY

Mesqool E-commerce Co., Ltd warrants the Mesqool branded alarm clock and accessories against defects in materials and workmanship for a period of 1 year from the date of original retail purchase. Replacement service is available within 3 months of purchase. A 1-month refund policy is also available for the original consumer or recipient.

The original consumer or recipient can sign up on the Mesqool website for an 18-month extended warranty.

For any product assistance, please contact Mesqool via email at support-us@mesqool.com.

Remarks:

• This warranty does not cover damage resulting from abuse, accident, climatic/environmental conditions, normal wear and tear, misuse, or unauthorized repair. Changes in surface finishes due to aging or exposure to light are also excluded. Mesqool's obligation is limited to repairing or replacing the product or component.
• Mesqool reserves the right to revise warranty policies without notification. Please check the Mesqool website for the latest updates.