Rattan Hat Pendant Light Installation Guide

Installation Steps

1. Step 1

   Drill holes in the ceiling and insert expansion screws.

   [Diagram: A drill is shown creating holes in a horizontal ceiling surface. Expansion screws are then depicted being inserted into these holes.]

2. Step 2

   Install the hanging plate on the ceiling.

   [Diagram: A mounting plate is shown being secured to the ceiling with screws. An upward arrow indicates the direction of attachment.]

3. Step 3

   The electric wires in the home connect to the light fixtures.

   [Diagram: Home electrical wires (typically black, white, and ground) are shown being connected to the corresponding wires of the light fixture.]

4. Step 4

   Install the lamp body on the hanging plate.

   [Diagram: The main body of the pendant lamp is shown being attached to the previously installed hanging plate. An upward arrow indicates the direction of attachment.]

5. Step 5

   Install bulb and lampshade.

   [Diagram: A light bulb is screwed into the socket, and the lampshade is fitted onto the lamp body. An upward arrow indicates the final assembly step.]

For more information, visit www.elegalight.com.

Brand: Elega LIGHT