Aviara LED Pendant Light

Step 1: Fix the hanging board to the ceiling. This involves securing the mounting bracket to the ceiling structure.

Step 2: Connect the lamp wires to the reserved wires. Refer to the wiring diagram (labeled '2') which shows electrical connections being made via terminal blocks. Arrows indicate the direction for inserting wires.

Step 3: Fix the ceiling tray and hanging board from the side. Attach the main canopy or ceiling tray to the mounting hardware, covering the electrical connections. The diagram shows the pendant light assembly being secured to the ceiling plate, with numbers '1' and '3' indicating securing points.

Step 1: Fix the hanging board to the ceiling. Secure the mounting bracket to the ceiling structure.

Step 2: Connect the lamp wires to the reserved wires. Use the wiring diagram (labeled '2') to connect the electrical wires via terminal blocks.

Step 3: Tighten the nut to secure the lamp body. Attach the three pendant light bodies to the central ceiling plate. The suspension wires are fed through the plate and secured, likely with nuts or locking mechanisms. Numbers '1' and '3' indicate securing points or components.

Step 1: Fix the hanging board to the ceiling. Secure the mounting bracket to the ceiling structure.

Step 2: Connect the lamp wires to the reserved wires. Use the wiring diagram (labeled '2') to connect the electrical wires via terminal blocks.

Step 3: Tighten the nut to secure the lamp body. Attach the six pendant light bodies to the central ceiling plate. The suspension wires are fed through the plate and secured, likely with nuts or locking mechanisms. Numbers '1' and '3' indicate securing points or components.