Elega Light Bloom Rattan Pendant Lamp Installation Guide

Follow these step-by-step instructions to safely and correctly install your Elega Light Bloom Rattan Pendant Lamp.

1. Prepare the ceiling: Drill holes into the ceiling at the desired mounting location. Insert expansion screws into the drilled holes to provide secure anchor points for the hanging plate. Visual: Diagram showing a drill creating holes in a ceiling surface and expansion screws being inserted.
2. Mount the hanging plate: Attach the provided hanging plate securely to the ceiling, aligning it with the expansion screws. Visual: Diagram showing a mounting plate being attached to the ceiling with screws. An upward arrow indicates attachment.
3. Connect wiring and attach lamp body: Connect the electrical wires from your home's wiring system to the corresponding wires of the pendant lamp. Ensure all connections are secure. Then, carefully attach the lamp body to the installed hanging plate. Visual: Diagram showing electrical wires being connected and the lamp body being mounted onto the hanging plate. Arrows indicate connection and attachment.
4. Install bulbs and lampshades: Insert the appropriate light bulbs into the lamp sockets. If applicable, attach any lampshades to the fixture. Visual: Diagram showing light bulbs being screwed into sockets and lampshades being fitted onto the lamp. Upward arrows indicate bulb insertion.

For further assistance or product information, please visit www.elegalight.com.