Introduction
Congratulations on choosing a Husqvarna product! Husqvarna has a rich history dating back to 1689, evolving from muskets to a wide range of high-quality motor-driven products for forestry, gardening, and construction. The Husqvarna 360BT is designed for blowing lawns, pathways, and asphalt roads. This operator's manual is a valuable document to ensure safe and effective use, extending the life span and value of your machine. For customer assistance, visit www.husqvarna.com.
Key to Symbols
The manual uses various symbols to indicate important safety information and operational procedures. Key symbols include:
- WARNING!: Indicates a dangerous situation that could result in serious injury or death.
- NOTE!: Provides important additional information.
- Always wear protective equipment (hearing protection, eye protection, gloves, breathing mask).
- Symbols for engine stop, regular cleaning, visual check, refuelling, choke positions, and air purge are also explained.
- A warning regarding California Proposition 65 is included for engine exhaust.
General Safety Precautions
Safe operation of the Husqvarna 360BT requires adherence to strict safety guidelines:
- Read the manual thoroughly before use.
- Always wear appropriate personal protective equipment (PPE).
- Never use the machine if tired, under the influence of alcohol, or taking impairing medication.
- Do not use a modified or faulty machine.
- Ensure all covers and guards are fitted.
- Keep bystanders and animals at least 15 meters away.
- Never allow children to use the machine.
- Check for blocked air intake screens.
- Keep body parts away from hot surfaces.
- Never start the machine indoors due to exhaust fumes.
- Follow fuel safety guidelines: use approved containers, refuel in a well-ventilated area, stop the engine before refueling, and move the machine at least 3 meters away before starting.
- Transport and store the machine and fuel safely, away from sparks or flames.
- Adjust the harness correctly for safe and comfortable operation.
- Be aware of potential electromagnetic field interference with medical implants.
Operation and Working Techniques
Proper operation ensures efficiency and safety:
- Start the engine on a flat surface, away from refueling areas.
- Use the choke for cold starts and avoid it for warm starts.
- Stop the engine by moving the stop switch to the STOP position.
- Regulate air jet speed using the throttle.
- Use a rake or brush for stubborn debris.
- Hold the blower nozzle close to the ground.
- Be aware of wind direction and work with it.
- Operate during reasonable hours to avoid disturbing neighbors.
- Never use the machine on a ladder or scaffolding.
- Avoid working in bad weather conditions.
- Conserve water by using the blower instead of a hose for certain tasks.
Assembly and Maintenance
The manual provides instructions for assembling components like the blow pipe and control handle. Regular maintenance is crucial for performance and longevity:
- Assembly: Connect pipes using flexible hoses and clamps. Lubrication may be needed for easier assembly. Flat nozzles can replace round ones for higher air speed.
- Maintenance Schedule: Includes daily, weekly, and monthly checks covering cleaning, functional checks of controls, air filter, fuel system, spark plug, and more.
- Air Filter: Must be cleaned regularly to prevent carburetor malfunctions, starting problems, power loss, and engine wear. It can be washed in soapy water or oiled for dusty conditions.
- Spark Plug: Check electrode gap (0.6-0.7 mm) and condition; replace if necessary.
- Muffler: Keep clean, check for secure attachment, and clean the spark arrestor screen monthly.
- Vibration Damping System: Check for damage.
- Fuel System: Check for leaks and fuel filter contamination.
Technical Data
Key specifications for the Husqvarna 360BT include:
- Engine: 65.6 cm³ (4.0 cu.in)
- Max. engine output: 2.84 kW / 8100 rpm
- Fuel tank capacity: 2.2 L (4.6 US pint)
- Weight (without fuel): 10.5 kg (23.2 Lbs)
- Sound pressure level: 95 dB(A)
- Vibration levels (handles): 2.3 m/s²
- Max. air velocity: 103.9 mph / 46.4 m/s
- Air flow: 17.9 m³/min (632 cfm)
Warranty Information
The manual includes the U.S. Federal, California, and Canada Exhaust and Evaporative Emissions Control Warranty Statement. It covers emissions-related parts for two years, provided the engine has not been abused, neglected, or improperly maintained. Owners are responsible for performing required maintenance as per the operator's manual. Contact Husqvarna Forest & Garden for warranty service.
